Just got an old Emaxx and am about to start laying the dosh into it for aluminum parts but I've been wondering if that was even worth it. If I could upgrade it even further down the line with brushless motors. Nice content and a wonderfully informative video thanks for the upload! Edit: mine came with 19T pins and a 66T spur but I'm running those twins on a 72T now. It's been a lot of fun. I read another comment you left on another comment saying this was the car you couldn't afford as a kid and that's the same here and now that I have it I'm excited to be able to really experience it!
Well then you are about to have a wonderful time.!! I loved every single minute with this rig. I hate that I had to let it go. It was a work of art, a project that is never really finished. The sight of two motors, ESCs, spurs and pinions... and yes, it's totally worth it. The sound it makes with any brushless setup is like nothing else out there. No matter if you spend 100$ on two brushless setups or 800$, they will both make your hair stand up. Mine sounded like a harrier jet at speed. I never really harnessed all of the power. Hopefully you will. Good luck and keep me posted. If you have any questions hit me back anytime. And thank you for your amazing comment.!! 😊🏎🏆
Excellent upgrade for this Emaxx, the test is really very conclusive, the advantage of doing this test run is that now you are sure that it is good. Can't wait to see the new version of MAX10s 😊
Any advice would be appreciated. I have to emaxes and they are both brushless of course. I can't keep the front end on the ground with just 6s and one brushless motor. It's so fast I have to drop it down to four cells to be able to race it at a decent track. Course that's my supermax version that I race. I guess you could go 12 cells with two brushless motors. Although I can't imagine why you would want to. I'll be curious to know what modifications you made to be able to handle two brushless motors
I’ve had my Dad’s Emaxx for a very long time and a few years ago I replaced the batteries and drove it around with my son but as we all know it’s severely underpowered. It’s been on the shelf for awhile now and it is in mint condition but you’ve inspired me big time to make these upgrades! What’s the best motor/sec setup I can install and did you run dual Lipo batteries? I need to figure out exactly how you wired both esc’s into one receiver and tie in that upgraded transistor. Your help would be greatly appreciated!
You are not gonna believe this, but I ran two completely different setups. Two of everything.!! 2 motors, two batteries and 2 ESCs. As long as everything is new and charged equally you will have no issue. As far as what to use. I did both an inexpensive set and after that I spent almost 600 on two 150 Amp MAX10 BRUSHLESS ESCs, Motors and new high capacity/ high C-rating batteries. It sounded like a harrier jet.!!
@@AMAZINGRC I must have model prior to yours because motor and esc’s have a different placement. Any ideas for making room for both esc’s in a limited space. I’m thinking of stacking them since I have the height but was curious on your ideas? Also do you have a link for the upgraded transistor so I don’t smoke the receiver? Lastly did your setup retain the 2 speed transmission?
I bet your big can 6S rig is super bad.!! This dual motor rig was uncontrollable.!! I don't have it anymore, but when I did it was crazy.! At full speed the front would gyro and lift off of the ground and take flight. I actually have a video in my collection of that rig taking flight and wrecking to bits. So much to run.!! 🏎🏆💪😊 Really appreciate that great comment my friend.!!
I eventually sold this rig, but while I had it it did really great. I had the upgraded driveshafts and that was about it as far as drivetrain. I just couldn't keep it rubber side down.!! Way too much torque at any speed.i could hammer down at 70mph and do a back flip turtle style. 🐢 it was NUTS.!!
Nice video brother 👍 she is looking sweet I was excited to see it run and she did good I think with some fans on the esc and the motor it will take it can't wait to see more keep up the great content 👊
Bro I'm so happy just to get her running on twin brushless power.! You know this has been my thing for a really long time now. Now that I know that this won't blow up sitting at idle, it's time to juice it up a bit. First I get my hands on my second new 3 cell. Next I follow your instruction and hit it with a few fans. Finally I'm gonna swap out the 11 tooth pinions for my set of 17s. That should get things moving really good. Hopefully the twin 17s won't be too much. We will see. Many thanks Dre.!
Good set-up. I have 2 Summits with dual set-ups. Did the dual Dewalt 820s ( not recomended. Heavy as a horse.) As long as that left me with an extra Summit motor...Well... Why would I not pair them up in the other Summit. Turned out better than the Dewalts.But, the torque of the Dewalts is more than overkill. Just in my opinion. The speed a motor runs is just that. No matter if you have 4 motors (Hummmm) less stress will give you a bit more speed.
Wow dude that's crazy! I was just looking for possible upgrades to the standard dual system on the 3906 I'm reviving. This would be perfect as I have two of those combos already myself. Would it be possible to use just a single one of those systems at all? Or would the sheer size of the tires and weight of the truck be too much and just burn up the esc/motor?
Ok, first... thank you for your amazing comment.!! I LOVE my dual motor OG EMAXX.!! This is one of my all time favorite rigs. This is the truck I could never afford as a young kid.. Now that I have one, I LOVE IT.!! I am so excited to have an EMAXX brother.!! I cant wait to see yours. To answer your question... YES, you need to use both systems to run this big rig. I actually moved up to two MAX10 BRUSHLESS systems and HUGE HEAVY wheels. Believe it or not I am moving back down to this setup again. I loved it. The only suggestion that I have is that you stay under twin 19 toothe pinion gears. You run the risk of SETTING THE TRUCK ON 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 Good luck and keep me posted. If you have any questions hit me up.!! 😊🏎🚀
@@philthyco1 I was so excited to get this running I had not noticed that I left out a bunch of info... first the fans, they were like jets on full throttle. They were so loud from the moment you turned the car on so I remover them knowing that I would be keeping an eye on the ESCs Temps anyway. I will be replacing them when I swap the twin 11 tooth pinions for my twin 17s. Fans over the motors too. Many thanks my brother.!!
By far one of the best radios on the market for the money. I have used some variation of these for over 7 years now. RadioLink RC4GS/RC6GS depending on how many channels you need.!! 😊🏎🏆
? I just bought a traxxas with twin titan 550 motors and 8 shocks. Any clues what it is? I need to replace 2 of the front shocks and the mount as it was wrecked when i bought it. I have search and cant find my car anywhere. Please help. Thank you for reading
Many thanks big bruh.! I have been keeping an eye on this set up and the Temps. I noticed them climbing in the very beginning. I am upgrading almost immediately. This setup was built to check and see its stability at idle...
@@BJETNT I had the combo in a 1/10 Traxxas Slash set up for speed runs so I had big pinion small spur and the esc caught fire. But I tell ya I replaced the esc with castle sidewinder and the motor worked well. Amazing RC has it set really good with small pinions and big spur.
@@godsun358 my nickname used to be crosswire when I raced when I was in my teens. I got to admit though I've never caught on ESC on fire when I was the one driving it at least. Surprising honestly. But back when I raced the maximum voltage was 8.4 volts not 33 like they have now LOL. Yeah I got to admit I like that channel.
Very nice Brian brother. Looks like a pretty good run out there for this thing bud. Now I was wondering if you have thought about combining the power leads from the ESC's to make one and then putting your batteries in parallel so that the same power runs through the system? Nomatter what battery you use.. ;)Thanks for sharing brother and nice work.. :)
Hey Bry, you were sort of comparing hobbywing to spectrum ESC’s? I’m not sure if you’re aware of this & Im not sure if it’s the same with all spectrum ESC’s? •The Spectrum 6s 185BLX is a “rebranded” Hobbywing Quickrun 150a 6s •The Spectrum 6s 200BLX is a “rebranded” Hobbywing EZrun Max8 6s Both of those ESC’s can be purchased “Unbranded” on AliExpress for a lot less money! I found this out wile doing some research on replacing the ESC in my 6s Kraton. I purchased an unbranded Max8 ESC for about $100CAD🇨🇦 that’s only like $70USD🇺🇸. 🍻thought you might like that info? Great job my friend! 👍
Yor were right, I love all of this info.!! I am all about the rebranded find.! I will be looking into this immediately. I have always wanted a dual brushless setup I was so excited doing this video that I failed to mention a ton of stuff. But I'm super glad you caught my ESC blunder because I did not know this bit of great info. Keep you posted and many thanks.!!
It's the original EMAXX platform believe it or not. Old school if you will. Not only that, the original motors were BRUSHED.!! Super underpowered.!! Thos dual brushless was a dream from 20 years ago.! So there's really no advantage to the dual motors... just that there cool to some. Thanks for the great question.! You never know unless you ask. 😎🏎👍
Definitely a cool truck I was hoping it gave them more torque. I was thinking about dual brushless in my brushless converted hpi savage 25 thinking lots more torque would be achieved
@@projectrccars6785 definitely more torque. I actually ended up installing two MAX10 motors and ESCs in this EMAXX. Let's just say... it was too much.!! I had to upgrade EVERYTHING 8n the drivetrain. It sounded so good though. I have videos of it on my channel.
It actually might be undergeared? Try twin 15 pinions and see were the temp is and build up a little at a time.. You might not even have to upgrade it any further.. Why did you remove the fans of the esc's keeping them cooler would keep them alot more efficent and with the new battery in the mail i think its gonna make more of a difference.
Oh yeah and another thing from my tests and all the motors ive tryed and tested those more basic surpass bl motors are a slightly lower aluminum quality then some others that are $5-$6 dollars more. They get a little hotter then some slightly higher quality motors. Less power too. I still will say they are in the top 3 for bang for your buck though. Specially when getting them in the esc, motor combo package deal.
@@AMAZINGRC lol I kind of spoke too soon , I seen your videos after this and you put TWO hobbywing max10s on it lol , weird that I have two identical hobbywing combos as well in my slash and in my rustler , they’re to fast to even handle when geared for speed ,don’t even get me started in those , your killing it man and it’s pretty ironic we have a lot of the same ideas ,
Bro, I’m loving this build and can’t wait to watch more. My emaxx is down at the moment due to a grinding noise somewhere in the drivetrain. I was ripping around on pavement with paddle tires when it started grinding hahahahaha oops 😬. Keep up the good job man 👍
I wish you had your EMAXX running again as well my friend. I have had this one for ten years now and I get upset when it's broken down. I totally get it. Many thanks for checking out my EMAXX.!
They will get hot with no load.... You gotta put a load on em... Once you do that it won't be to hot... Plus 11T pinions are to small for those 3660s... You need 14t 15t 16t for each one... 15t prob would be best honestly
Omg looking like too much fun keep it up👌👍🏞 10:31 it sounds good 👌 I have a friend high school friend got a old-school Traxxas nitro Revo i thank anyway he just got through breaking it in we was gonna run yesterday but didn’t happen lol
@@AMAZINGRC lol after a while it seems like not enough once you get used to controlling the car ,for me at least , iv got two combos and beat the hell out of them ripping up and down the road and now I’m think I wanna step it up but it’s hard to find somthing as cheap as a max10 with the same quality , I love them in my slash and rustler
I know this a "general" statemen BUT never seen the purpose of dual motors in models cars. We are looking at reletivly "cheap/basic" electronics motor/esc wise to work in tandem. Why not just get a decent single motor setup.
That's what Traxxas did almost immediately due to cost. I am super old shcool on this one and have always wanted to explore this dual brushless system. Always wanted to see if it would set itself on fire on the bench. Now that I know that it's stable, I must juice it up.! Many thanks for the great comment, hope this answers your question of my sanity...LOL.!
@@AMAZINGRC when RC electric motor use stated to get common,not so much cars ,motor choice was limited so using 2 motors would solve some requirements but now motors are so well made and so powerful seems a lot of unessary fuss for the basher.just my opinoin,enjoy the benctime.
See I have two emaxes and I have one that I race with one brushless motor and only four cells otherwise I can't keep the front end on the ground. And the other one I play around with 6s as just a basher and I can't keep the front end off the ground and it'll do 80 miles an hour. I'm with you I have no desire to run two engines on that thing it makes no sense. I mean if I was going for a speed run and trying to break a record or something maybe but it just seems like extra hassle and extra weight. Not to mention extra money. The original twin titan emax I can understand because they did not have brushless motors back then. But now electric is blowing the doors off of gas so it's not necessary to have two motors anymore in my opinion.
i am running 1 3674 2250kv surpass hobby with 120a esc on 4 cell . 20 tooth pinion on my 3906 emaxx. mad power .barely gets warm. i think u can go up a few teeth on pinion.u are basically running a 36 100 .should be doing backflips almost . the surpass hobby line is great .i have several .u need program card to get full power.check out banggood .they are legit . iget a lot of stuff there.very cheap.
Ok, WOW... lots to say..!! I picked up the Surpass Hobby 60A ESCs to test out if running two brushless systems in parallel without things blowing up in idle... once I found out that dual brushless could be a thing I went for the big stuff... now this EMAXX has two MAX10 120A, tire shredding ESCs deep inside its bowels..!!! You must watch me attempt to keep this truck on the ground..!!! But before you do you must know that I have been an affiliate for Banggood.com for a couple years now and I LOVE the company. That's why I went for the Surpass setups. Good stuff.!
These were almost 500 new when they were sold. Always triple check sited like ebay to see what things like this are selling for. Not asking price, but selling. Your 300 dollar offer is a start anything less than 450 would be a great price. New in the box though.
Very nice Brian nice job and very nice FPV vide to thank you for sharing , Happy Easter.
Great run Awesome location
Many many thanks my good friend.! Your comments to my channel are greatly appreciated.!!
Just got an old Emaxx and am about to start laying the dosh into it for aluminum parts but I've been wondering if that was even worth it. If I could upgrade it even further down the line with brushless motors. Nice content and a wonderfully informative video thanks for the upload! Edit: mine came with 19T pins and a 66T spur but I'm running those twins on a 72T now. It's been a lot of fun. I read another comment you left on another comment saying this was the car you couldn't afford as a kid and that's the same here and now that I have it I'm excited to be able to really experience it!
Well then you are about to have a wonderful time.!! I loved every single minute with this rig. I hate that I had to let it go. It was a work of art, a project that is never really finished. The sight of two motors, ESCs, spurs and pinions... and yes, it's totally worth it. The sound it makes with any brushless setup is like nothing else out there. No matter if you spend 100$ on two brushless setups or 800$, they will both make your hair stand up. Mine sounded like a harrier jet at speed. I never really harnessed all of the power. Hopefully you will. Good luck and keep me posted. If you have any questions hit me back anytime. And thank you for your amazing comment.!! 😊🏎🏆
The thing is one motor is better as they run more volts through it like 6s. Just got a Maxx and only run it on 3s what a crazy machine.
Thanks for sharing ... good video
Really appreciate that great comment my friend.!! 🏎👍😃
Excellent upgrade for this Emaxx, the test is really very conclusive, the advantage of doing this test run is that now you are sure that it is good. Can't wait to see the new version of MAX10s 😊
Any advice would be appreciated. I have to emaxes and they are both brushless of course. I can't keep the front end on the ground with just 6s and one brushless motor. It's so fast I have to drop it down to four cells to be able to race it at a decent track. Course that's my supermax version that I race. I guess you could go 12 cells with two brushless motors. Although I can't imagine why you would want to. I'll be curious to know what modifications you made to be able to handle two brushless motors
I’ve had my Dad’s Emaxx for a very long time and a few years ago I replaced the batteries and drove it around with my son but as we all know it’s severely underpowered. It’s been on the shelf for awhile now and it is in mint condition but you’ve inspired me big time to make these upgrades! What’s the best motor/sec setup I can install and did you run dual Lipo batteries? I need to figure out exactly how you wired both esc’s into one receiver and tie in that upgraded transistor. Your help would be greatly appreciated!
You are not gonna believe this, but I ran two completely different setups. Two of everything.!! 2 motors, two batteries and 2 ESCs. As long as everything is new and charged equally you will have no issue. As far as what to use. I did both an inexpensive set and after that I spent almost 600 on two 150 Amp MAX10 BRUSHLESS ESCs, Motors and new high capacity/ high C-rating batteries. It sounded like a harrier jet.!!
@@AMAZINGRC I must have model prior to yours because motor and esc’s have a different placement. Any ideas for making room for both esc’s in a limited space. I’m thinking of stacking them since I have the height but was curious on your ideas? Also do you have a link for the upgraded transistor so I don’t smoke the receiver? Lastly did your setup retain the 2 speed transmission?
Wow very nice test dual moter is very powerful
Looks and sounds immense pal great video 😁😁
Wanted to do this for so long.!! Now it's time to juice it up with more power.!! Many thanks for the great comment.!
Bonjour mon ami Brian 👍😉
Awesome congrats buddy
Many many thanks my good friend.!! Jean Marc, I find great enjoyment from your dioramas. Your skill is amazing.!
Great job and very nice FPV 👏
I would run 2 sensor motors with the correct esc
That would work too.!!
That’s cool I got a 6s converted T max never thought about two but it’s pretty uncontrollable with one on 6s 👍
I bet your big can 6S rig is super bad.!! This dual motor rig was uncontrollable.!! I don't have it anymore, but when I did it was crazy.! At full speed the front would gyro and lift off of the ground and take flight. I actually have a video in my collection of that rig taking flight and wrecking to bits. So much to run.!! 🏎🏆💪😊
Really appreciate that great comment my friend.!!
this is pretty sweet bro. how's the drivetrain holding up?
I eventually sold this rig, but while I had it it did really great. I had the upgraded driveshafts and that was about it as far as drivetrain. I just couldn't keep it rubber side down.!! Way too much torque at any speed.i could hammer down at 70mph and do a back flip turtle style. 🐢 it was NUTS.!!
Nice video brother 👍 she is looking sweet I was excited to see it run and she did good I think with some fans on the esc and the motor it will take it can't wait to see more keep up the great content 👊
Bro I'm so happy just to get her running on twin brushless power.! You know this has been my thing for a really long time now. Now that I know that this won't blow up sitting at idle, it's time to juice it up a bit. First I get my hands on my second new 3 cell. Next I follow your instruction and hit it with a few fans. Finally I'm gonna swap out the 11 tooth pinions for my set of 17s. That should get things moving really good. Hopefully the twin 17s won't be too much. We will see. Many thanks Dre.!
what slipper cluch eliminator is on it?
I just tighten the bolt down real good and that usually does the trick. Crazy wheelie action.!!
@@AMAZINGRC is yours the 2 speed transmission? also know as 3906 model E-maxx.
@@russgrady7397 no, mine was the single transmission...
Nice info, thanks for sharing this video👍👍💯
Good set-up. I have 2 Summits with dual set-ups. Did the dual Dewalt 820s ( not recomended. Heavy as a horse.) As long as that left me with an extra Summit motor...Well... Why would I not pair them up in the other Summit. Turned out better than the Dewalts.But, the torque of the Dewalts is more than overkill. Just in my opinion. The speed a motor runs is just that. No matter if you have 4 motors (Hummmm) less stress will give you a bit more speed.
Is the driveline going to hold up to this new power upgrade? (Trans, driveshafts, axles & hubs)
If so, I'll def mimic what you have done . TIA
I actually did upgrade the axles all the way around, including the centers. Traxxas upgrades. Super sexy and strong.!
Wow dude that's crazy! I was just looking for possible upgrades to the standard dual system on the 3906 I'm reviving. This would be perfect as I have two of those combos already myself.
Would it be possible to use just a single one of those systems at all? Or would the sheer size of the tires and weight of the truck be too much and just burn up the esc/motor?
Ok, first... thank you for your amazing comment.!! I LOVE my dual motor OG EMAXX.!! This is one of my all time favorite rigs. This is the truck I could never afford as a young kid.. Now that I have one, I LOVE IT.!!
I am so excited to have an EMAXX brother.!! I cant wait to see yours. To answer your question... YES, you need to use both systems to run this big rig. I actually moved up to two MAX10 BRUSHLESS systems and HUGE HEAVY wheels. Believe it or not I am moving back down to this setup again. I loved it. The only suggestion that I have is that you stay under twin 19 toothe pinion gears. You run the risk of SETTING THE TRUCK ON 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 Good luck and keep me posted. If you have any questions hit me up.!! 😊🏎🚀
If you’re looking for a single motor setup, look for an 1/8 scale power system. Hobby wing max8, castle mama monster, etc.
DOPE!!!!!
Why did you remove the ESC fans for??
@@philthyco1 I was so excited to get this running I had not noticed that I left out a bunch of info... first the fans, they were like jets on full throttle. They were so loud from the moment you turned the car on so I remover them knowing that I would be keeping an eye on the ESCs Temps anyway. I will be replacing them when I swap the twin 11 tooth pinions for my twin 17s. Fans over the motors too. Many thanks my brother.!!
Looking good bother!
You do FPV with 1/24 scale oh my gosh I’m subscribing
LOL, heck yeah.!
What kind of transmitter is that
By far one of the best radios on the market for the money. I have used some variation of these for over 7 years now. RadioLink RC4GS/RC6GS depending on how many channels you need.!! 😊🏎🏆
? I just bought a traxxas with twin titan 550 motors and 8 shocks. Any clues what it is? I need to replace 2 of the front shocks and the mount as it was wrecked when i bought it. I have search and cant find my car anywhere. Please help. Thank you for reading
Pretty sure it's a Traxxas EMAXX. Early version.
Dreams come true bruh and you did it your way good job!! be careful with that motor/esc combo check temp often bruh.
Many thanks big bruh.! I have been keeping an eye on this set up and the Temps. I noticed them climbing in the very beginning. I am upgrading almost immediately. This setup was built to check and see its stability at idle...
Why would the temperature go up out of curiosity because the workload would be split in half. I'm not criticizing I'm honestly asking.
@@BJETNT I had the combo in a 1/10 Traxxas Slash set up for speed runs so I had big pinion small spur and the esc caught fire.
But I tell ya I replaced the esc with castle sidewinder and the motor worked well.
Amazing RC has it set really good with small pinions and big spur.
@@godsun358 my nickname used to be crosswire when I raced when I was in my teens. I got to admit though I've never caught on ESC on fire when I was the one driving it at least. Surprising honestly. But back when I raced the maximum voltage was 8.4 volts not 33 like they have now LOL. Yeah I got to admit I like that channel.
@@BJETNT I have burned 1 castle xlx and 2 hobbywing max 5 also 3 hex 6s.... 🔥 🔥
Sensorless brushless motors get hot when they have no load on them. It's normal
Very nice Brian brother. Looks like a pretty good run out there for this thing bud. Now I was wondering if you have thought about combining the power leads from the ESC's to make one and then putting your batteries in parallel so that the same power runs through the system? Nomatter what battery you use.. ;)Thanks for sharing brother and nice work.. :)
Hey Bry, you were sort of comparing hobbywing to spectrum ESC’s? I’m not sure if you’re aware of this & Im not sure if it’s the same with all spectrum ESC’s?
•The Spectrum 6s 185BLX is a “rebranded” Hobbywing Quickrun 150a 6s
•The Spectrum 6s 200BLX is a “rebranded” Hobbywing EZrun Max8 6s
Both of those ESC’s can be purchased “Unbranded” on AliExpress for a lot less money! I found this out wile doing some research on replacing the ESC in my 6s Kraton. I purchased an unbranded Max8 ESC for about $100CAD🇨🇦 that’s only like $70USD🇺🇸. 🍻thought you might like that info? Great job my friend! 👍
Yor were right, I love all of this info.!! I am all about the rebranded find.! I will be looking into this immediately. I have always wanted a dual brushless setup I was so excited doing this video that I failed to mention a ton of stuff. But I'm super glad you caught my ESC blunder because I did not know this bit of great info. Keep you posted and many thanks.!!
What is the point of dual motor?
It's the original EMAXX platform believe it or not. Old school if you will. Not only that, the original motors were BRUSHED.!! Super underpowered.!! Thos dual brushless was a dream from 20 years ago.! So there's really no advantage to the dual motors... just that there cool to some. Thanks for the great question.! You never know unless you ask. 😎🏎👍
Definitely a cool truck I was hoping it gave them more torque. I was thinking about dual brushless in my brushless converted hpi savage 25 thinking lots more torque would be achieved
@@projectrccars6785 definitely more torque. I actually ended up installing two MAX10 motors and ESCs in this EMAXX. Let's just say... it was too much.!! I had to upgrade EVERYTHING 8n the drivetrain. It sounded so good though. I have videos of it on my channel.
Amazing Video👍 I subscribed
It actually might be undergeared? Try twin 15 pinions and see were the temp is and build up a little at a time..
You might not even have to upgrade it any further..
Why did you remove the fans of the esc's keeping them cooler would keep them alot more efficent and with the new battery in the mail i think its gonna make more of a difference.
Oh yeah and another thing from my tests and all the motors ive tryed and tested those more basic surpass bl motors are a slightly lower aluminum quality then some others that are $5-$6 dollars more. They get a little hotter then some slightly higher quality motors. Less power too. I still will say they are in the top 3 for bang for your buck though. Specially when getting them in the esc, motor combo package deal.
Btw I have ONE of those identical combos on my brothers 3906 and it hauls ASS , try them with 20t pinions
I will.!!!! Many thanks my RC friend.!!!
@@AMAZINGRC lol I kind of spoke too soon , I seen your videos after this and you put TWO hobbywing max10s on it lol , weird that I have two identical hobbywing combos as well in my slash and in my rustler , they’re to fast to even handle when geared for speed ,don’t even get me started in those , your killing it man and it’s pretty ironic we have a lot of the same ideas ,
Bro, I’m loving this build and can’t wait to watch more. My emaxx is down at the moment due to a grinding noise somewhere in the drivetrain. I was ripping around on pavement with paddle tires when it started grinding hahahahaha oops 😬. Keep up the good job man 👍
I wish I had my emaxx running again.
I wish you had your EMAXX running again as well my friend. I have had this one for ten years now and I get upset when it's broken down. I totally get it. Many thanks for checking out my EMAXX.!
@@AMAZINGRC no problem.
They will get hot with no load.... You gotta put a load on em... Once you do that it won't be to hot... Plus 11T pinions are to small for those 3660s... You need 14t 15t 16t for each one... 15t prob would be best honestly
🔥🔥🔥🔥🔥🔥🔥🔥
Omg looking like too much fun keep it up👌👍🏞 10:31 it sounds good 👌
I have a friend high school friend got a old-school Traxxas nitro Revo i thank anyway he just got through breaking it in we was gonna run yesterday but didn’t happen lol
GETTING FASTER!!!!!
You can get a max10 combo for $107 on Amazon
I picked them up and LIVE THEM..!! So much power it rips the truck apart under full throttle and only 3S..!!! Insane power.!! Too much.???
@@AMAZINGRC lol after a while it seems like not enough once you get used to controlling the car ,for me at least , iv got two combos and beat the hell out of them ripping up and down the road and now I’m think I wanna step it up but it’s hard to find somthing as cheap as a max10 with the same quality , I love them in my slash and rustler
Awesome
I know this a "general" statemen BUT never seen the purpose of dual motors in models cars. We are looking at reletivly "cheap/basic" electronics motor/esc wise to work in tandem. Why not just get a decent single motor setup.
That's what Traxxas did almost immediately due to cost. I am super old shcool on this one and have always wanted to explore this dual brushless system. Always wanted to see if it would set itself on fire on the bench. Now that I know that it's stable, I must juice it up.! Many thanks for the great comment, hope this answers your question of my sanity...LOL.!
@@AMAZINGRC when RC electric motor use stated to get common,not so much cars ,motor choice was limited so using 2 motors would solve some requirements but now motors are so well made and so powerful seems a lot of unessary fuss for the basher.just my opinoin,enjoy the benctime.
See I have two emaxes and I have one that I race with one brushless motor and only four cells otherwise I can't keep the front end on the ground. And the other one I play around with 6s as just a basher and I can't keep the front end off the ground and it'll do 80 miles an hour. I'm with you I have no desire to run two engines on that thing it makes no sense. I mean if I was going for a speed run and trying to break a record or something maybe but it just seems like extra hassle and extra weight. Not to mention extra money. The original twin titan emax I can understand because they did not have brushless motors back then. But now electric is blowing the doors off of gas so it's not necessary to have two motors anymore in my opinion.
Because it's a fun build?
i am running 1 3674 2250kv surpass hobby with 120a esc on 4 cell . 20 tooth pinion on my 3906 emaxx.
mad power .barely gets warm.
i think u can go up a few teeth on pinion.u are basically running a 36 100 .should be doing backflips almost .
the surpass hobby line is great .i have several .u need program card to get full power.check out banggood .they are legit . iget a lot of stuff there.very cheap.
Ok, WOW... lots to say..!! I picked up the Surpass Hobby 60A ESCs to test out if running two brushless systems in parallel without things blowing up in idle... once I found out that dual brushless could be a thing I went for the big stuff... now this EMAXX has two MAX10 120A, tire shredding ESCs deep inside its bowels..!!! You must watch me attempt to keep this truck on the ground..!!! But before you do you must know that I have been an affiliate for Banggood.com for a couple years now and I LOVE the company. That's why I went for the Surpass setups. Good stuff.!
ua-cam.com/video/zQPiQGFVA_o/v-deo.html
There is a guy selling one of these brand new for 670 dollars and it’s only brushed with no remote open box but brand new. I offered him 300 for it.
These were almost 500 new when they were sold. Always triple check sited like ebay to see what things like this are selling for. Not asking price, but selling. Your 300 dollar offer is a start anything less than 450 would be a great price. New in the box though.
Looks really slow
It was, then I stuffed two MAX10 setups in there and it was too fast...lol
I am converting a t-maxx to a lwb e-maxx now
I am using a HW Max 8 2250kv with a 160 amp esc
give me a call or text me tomorrow I want to invite u somewhere