It gets the job done. I have a similar swing gate and wondered about Wavian cans and mounting and found your video. This makes me feel better about it. I actually don’t know the brand of the swing gate and was concerned about the angle of the area where the mount touches being off or making the cans lean too much or whatever.
A lot of diy going on the back rack and awning, tailgate table, and Rtt rack all diy including the air compressor under the hood install and rocksliders. I’ve purchased a lot of other items over time like the hood latches and hood louver, soft top and radios but I’ve installed everything! Thanks for watching I appreciate it 🍻
Great Video!! I was looking for something like this. I'm glad that I ran into your video on UA-cam! Question for you. Would this work on any swing gate tire mount? I have Wilco Off Road tire mount swing gate that's currently holding a 35'' tire, will this work with my setup?
What exactly did you have to modify? I have 06 wrangler with the same bumper as you, but I have 33” tires. Will the bigger spare fit? Ty.. and great video!
No mods to the carrier, just made the rack out of a hitch hauler. here’s the video on the build, the rack just drops into position. Tires will fit Version 1 ua-cam.com/video/NluSecoW_JY/v-deo.htmlsi=0p9V0D4nvtS0pm8v version 2 ua-cam.com/video/eu6RkSz6h-8/v-deo.htmlsi=iVsEcPKd1EMlfZea Tailgate table 1ua-cam.com/video/MSo88RPHuHs/v-deo.htmlsi=JWf_1SJ5drKZrdyP Tailgate table2: ua-cam.com/video/xpmF-3DPO04/v-deo.htmlsi=TUexE8WOLkQMug19
I have not yet used the siphon for gas , so far I have just used it for water wash station, the fuel cell I’m using currently has a really nice fuel spout built in, I recently moved to the plastic spectere red 5gallon fuel cell and away with the metal jerry . Any ideas on a container? Thanks for watching!
I really would like your opinion on something. I’m running 31s on my 4 banger atm. 2 inch lift. Do you think the spare will look weird on the smittybilt tire carrier. I saw that it’s in a fixed position so I was worried about it sitting up too high. Do you think it’ll look weird?
💥 nice 👍🏼 if you have all the same matching wheels and tires I don’t see why not . Haha 😂 my spare right now is a 31” good tire, but I’m running 32” atm! Thanks for watching
It gets the job done.
I have a similar swing gate and wondered about Wavian cans and mounting and found your video. This makes me feel better about it. I actually don’t know the brand of the swing gate and was concerned about the angle of the area where the mount touches being off or making the cans lean too much or whatever.
ATEM-It worked! I followed your video and got the Wavian mounted on my TJ! Thank you sir.
I had to modify one mount since , this allows for The red plastic can i have back there now. This brand rear bumper is by smittybilt. 🍻
Very nice!
Hey, if you have any comments or questions feel free to ask. Thanks for watching
Where did you get the fuel cell mount from?
@@brandonprice9327 Amazon amzn.to/38WRT12
Thanks for watching
If the entire rig was purchased, was it DIY?
-- Pretty good video, keep em coming.
A lot of diy going on the back rack and awning, tailgate table, and Rtt rack all diy including the air compressor under the hood install and rocksliders. I’ve purchased a lot of other items over time like the hood latches and hood louver, soft top and radios but I’ve installed everything! Thanks for watching I appreciate it 🍻
Great Video!! I was looking for something like this. I'm glad that I ran into your video on UA-cam! Question for you. Would this work on any swing gate tire mount? I have Wilco Off Road tire mount swing gate that's currently holding a 35'' tire, will this work with my setup?
🔥🔥🔥
Great vid
Thanks for watching
What exactly did you have to modify? I have 06 wrangler with the same bumper as you, but I have 33” tires. Will the bigger spare fit? Ty.. and great video!
No mods to the carrier, just made the rack out of a hitch hauler. here’s the video on the build, the rack just drops into position. Tires will fit
Version 1
ua-cam.com/video/NluSecoW_JY/v-deo.htmlsi=0p9V0D4nvtS0pm8v
version 2
ua-cam.com/video/eu6RkSz6h-8/v-deo.htmlsi=iVsEcPKd1EMlfZea
Tailgate table 1ua-cam.com/video/MSo88RPHuHs/v-deo.htmlsi=JWf_1SJ5drKZrdyP
Tailgate table2:
ua-cam.com/video/xpmF-3DPO04/v-deo.htmlsi=TUexE8WOLkQMug19
I ordered them.. fit perfect and love it! Ty for the video and all the info… sweet rig !!
Have you managed to store the siphon inside a container to stop the whole jeep smelling like gas?
I have not yet used the siphon for gas , so far I have just used it for water wash station, the fuel cell I’m using currently has a really nice fuel spout built in, I recently moved to the plastic spectere red 5gallon fuel cell and away with the metal jerry . Any ideas on a container? Thanks for watching!
@@ATEMOFFROAD i’m keeping my eyes open for an air tight HDPE container, should do the trick!
I really would like your opinion on something. I’m running 31s on my 4 banger atm. 2 inch lift. Do you think the spare will look weird on the smittybilt tire carrier. I saw that it’s in a fixed position so I was worried about it sitting up too high. Do you think it’ll look weird?
💥 nice 👍🏼 if you have all the same matching wheels and tires I don’t see why not . Haha 😂 my spare right now is a 31” good tire, but I’m running 32” atm! Thanks for watching
@@ATEMOFFROAD love your videos bro 👏🏼
@@wtjonny thanks bro I appreciate it!
Won't the ratchets get rusty after time?
I thought the same thing and took a chance on them , They have actually held up ! No rust! Thanks for watching
DIY ? Looks like store bought bolt on !!!
DIY install, thanks for watching 🍻
That's why I gave it a thumb's down.
Does your tailgate fully open?
Kerem Yazgan yes just over 90 degrees good enough for me
What size tire is it?
Hi there , thanks for watching at this time in the build I was running 31” discovery coopers . Now I run these ua-cam.com/video/KZndi2_vF4M/v-deo.html