Jeep Wrangler- DIY Overland Rear Trail Cargo Rack Basket Build JEEP TJ XJ YJ JK CJ
Вставка
- Опубліковано 6 вер 2024
- Trail rack is very important for the RIG when Wheeling overland. In this Short video I tell a story how I Fabricate and install a cheap and effective trail rack for overland gear. I hope you enjoy.. Thanks for watching! And if you haven't yet subscribed please do ! Cheers
#jeeptj #trailrack #cargobasket
The whole parts list I use on my Overland rig
Hi! Take a look at this List I created on Amazon. www.amazon.com...
In depth video Filter for each mod and build
More Awesome Content?
DIY Overland kitchen Tailgate table
• DIY Jeep Wrangler Tj ...
DIY Bolt On Hi-Lift J-Mount Install
• Video
DIY Front Stubby off-road bumper
• Jeep Wrangler TJ - DIY...
DIY Body Lift
• Jeep Wrangler TJ - DIY...
Jeep front and rear shock replacement
• DIY How To Replace All...
Sway bar quick disconnects
• $20 DIY Jeep Sway Bar ...
Overland Tool mounting Solutions
• DIY Overland Trail Car...
Jeep Tailgate table build
• DIY Jeep Wrangler TJ T...
DIY Jeep Rock sliders
• DIY Jeep Wrangler Rock...
How To Install cb radio in Jeep Wrangler
• How To Properly Instal...
32” tires I’m running
• 32” Tires On My Jeep W...
DIY On board air compressor build
• Jeep Wrangler Tj | Lj ...
Fuel and water cell mounting Solutions
• DIY Overland Jeep Wran...
DIY Rear Trail Cargo Rack build
• Jeep Wrangler- DIY Ove...
Hi jack hood mounts install
• Jeep Wrangler How To I...
Wireless winch controls
• How To Install An Opti...
DIY Jeep E Fan build
• DIY JEEP WRANGLER Elec...
DIY JEEP Trail Cargo Rack Build For Under $75 JEEP TJ XJ YJ JK
DISCLAIMER
Due to the factors out of control by ATEM OFFROAD, we cannot guarantee against improper use or unauthorized modifications of this information ATEM OFFROAD assumes no liability or responsibility for property damages or injuries incurred as a result of any information contained in this video. Use this information at your own risk . ATEM OFFROAD recommends safe practices when working on vehicles and or with tools seen in this video, any injury damage or loss that may result from improper use of these tools equipment or from the information contained in this video
Is the sole responsibility of the user and not ATEM OFFROAD. Be Safe
This video and description contains affiliate links which means if you click on one of these product links, I’ll receive a small commission.
Hey, if you have any comments or questions feel free to ask. Thanks for watching
I see where you got the inspiration, lol. Looks good man!
Thanks buddy, I appreciate it and the inspiration too. Much Love for your channel btw. A ton has changed since then on the jeep. homemade awning and different mounts for tools, fuel and water cells! Miss seeing that badass TJ of yours. Thanks for watching 🍻
@@ATEMOFFROAD Right on that's awesome! Keep at it, and I appreciate it! 🍻
Great idea, Harbor Freight sell the same carrier if anyone is wondering. My only critique on the videos is the music is a little loud. I find myself turning the volume down on the music and up when you talk. Thanks for the idea!!
W Gibbs thanks for the pointers, will keep in mind , sub to me !! Thanks
Very nice. The repurposing from stuff laying around is excellent! I am using your idea here for my small trailer rear rack. Thank you.
Very cool , cheers
i was about to spend 300 thank you amazing job welding
💥 nice, thanks for watching
Nice looking wrangler
Thanks bro
amazing stuff
Nice job. Thanks for the walk through.
Very cool but if you have a hard top you might not be able to open the back window all the way
I ended up going with different fuel water mounts the right mount was modified so I can swing the gate much further out of the way! Still haven’t put a hard top on there but I do think it would clear! Maybe check out one of my solo camp videos and see if your interested
Super nice!! 👍
Thanks , had a blast building it!
Very nice 👍
Thanks , had a blast building it!
I'd like to know how you mounted the water n fuel
I use these mounts on that bumper . And right now there’s a coupon on Amazon. Thanks for watching 🍻 amzn.to/45n8eHy
Does it shake a lot and rattle? Or is it a pretty tight fit? I was hoping you would have shook it in the video to show how secure it is.
Thanks for the video and idea.
There is some but very minimal movement not noticed while driving, since then I have build a awning for it that I use often and have tools in it ! Works great! Thanks for watching 🍻
Looks fantastic!!
@Legacy 4x4 and Off-Road thanks buddy , I really appreciate it! Cheers.
Nice build, have good welds on that man!! Also noticed the nozzle missing on the tip, does that keep the splatter down? Also have a flux core welder, that's why I ask, Thanks for the ideas, Keep Jeepin!!!
💥 thanks, I don’t use the gas cup because flux cored wire doesn’t require additional gas to shield the welds, when the wire reaches temperature there’s a chemical reaction that produces its own gas to shield the weld area, but there is a dual shield set up that can use both gas and flux combined, its personal preference and good welds can be produced either way, thanks for watching!
Did you fabricate the swing tire mount or did you buy it?
I bought it this is it on Amazon.com amzn.to/3Yeqy3e
would you consider making and selling one of these? great work
I have since modified it to accommodate a diy awning that I made, but Possibly I can make you one and mail it to you! Because shipping I think the best way to do it would be in two pieces, I make the part that slides in the tube with the supports and you bolt on the rack, it would require you to drill and bolt the rack to the support! Is that something you would be interested in? Thanks
🤜🤛
🍻
Nice setup. How did you hook the fuel cans to the rear cargo carrier? Is there a video for the same?
I I mount hookeroad fuel and water can mount for the swing out tire carrier back there. I’d never advocate to hang off the rack like that. 🍻
I need a welder.
Heak yeah , totally worth it! , thanks for stopping by and watching!
How are those side cans mounted? Just hanging from bottom of rack? Anything to keep them steady side to side?
dgtlionbarger please disregard the way the cans are mounted in this video, this was a test run and I would never advocate this way of mounting. This is how I have mounted both my cans watch this video. Thanks for watching!! Hers is the link
ua-cam.com/video/3KwyNjUeLX4/v-deo.html
dgtlionbarger they are mounted with ubolts if you keep the can empty all the time it works
What bumper is that? Been looking for one similar and I like the idea. So want to make sure I get that one.
@Z3ROULTRA 💥 nice, thanks for watching! This bumper is the SRC by smittybuilt, hope this helps. cheers buddy!
is this for sale?
Hey where did get the rack from??
DIRTY D hahah Dirty D I found it on eBay, but you can find one just like it on Quadratec.com