A word of caution to anyone considering the Rampage: I bought a set a few months ago and with a 3-fletch AAE Max Hunter configuration and 175 grains at the front they were flying like laser beams. However after a few months of practice I am now experiencing cracks on the both ends of the shaft. Folks are also complaining about this in the comments on Lancaster Archery Supply. And thank you as always for the video content! I met a guy in Scheels a few weeks ago here in north Texas that met you and said you're a hell of a dude!
Been using Black Eagle for years now and I've never had that much deviation in straightness between arrows and I've shot the Rampage, the renegades, Carnivores, Outlaws, Deep impacts just to name a few.. I've highly recommended them out of my personal archery shop... Keep up the great videos....
@Everettsnumber1fan I've used all 3 of those for hunting situations and you couldn't go wrong with either one of those just pick a set and I'm sure you will be happy .just make sure you pick the right spine for your set up...
@@paulshumate2904 thanks Paul, I am wanting to go with the deep impacts, but I was hoping to sneak into a 400 spine but I’m right on the bubble of 350 vs 400. I shoot 58 lbs 28 inch draw out of the new Darton sequel 31. Think the 400 would work to keep weight down? I figure I will cut my arrow to 28 or 27.5.
One of my cousins has used these for years and loves them and can shoot pretty nice groups out to 70 yards with them. He changed up this year to a GT Black Label Quantum because he is curious to see what else flies well out there. I like .204 ID arrows and was thinking about getting 3 or 4 shafts of a few brands like Black Eagle 🦅 Victory, Gold Tip, Easton, Sirius to see which tunes best out of my PRIME Black 3 bow, then buy more of the winner. Thanks for sharing Josh.
Almost went with these but I decided to go to the X impacts with 80 grain aluminum FOCOS outserts with a 16% FOC. I run same arrow on my V3 31 and my V3X 29. Love BE arrows
I personally shoot these Black Eagle Rampage’s. My arrows are 300 spine, cut to 29”, I use the stock insert with a 125g point, tac driver vanes and it comes out to 543 grains at 15% FOC. I do have to say the stock inserts have bent on me in the past, so if MFJJ has a solution for that I’d like to know!
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
I wasn't impressed with Rampage when I tried them a few years ago. The nock ends cracked really easily. I don't know if that was because of the shaft or the nocks. Same problem with the Spartans. The Zombie Slayers held up great. They all flew really well. I since switched to Victory and Easton 6.5 and have been much happier with durability.
It’s 100% the nock. Changed to Beiter and the rear gets crushed rather than splits on rear impact. With pin the pin will dent and bend but the shaft will be fine.
I have a 28" DL, my .001 Rampage arrows are 27.125", I use the 52 grain outsert that is included, 125 grain field point, 3 AAE Max Stealth vanes. 442 grain total weight and 14.8% foc. Great arrow- I just wish the arrow wrap/logo wasn't such a dull color,lol. None of my dozen arrows wobbled like the worst one you had, you might of got an odd batch. I would of probably called the company and sent those back. I have been shooting mine for a year.. great arrows and very well priced. recommended .
Bought a dozen once. Destroyed more than half shooting 3D. Every rampage wobbled out the box and had an extreme wobble after the shoot. Went back to rip tko, durable shafts but the insert systems suck for the small diameter. Decided to start the deer season with black eagle carnivore arrows. Found some slightly heavier inserts. After some tinkering I was satisfied with the standard diameter. For now I’ll stay away from small and micro.
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Not all batches ( 12) of the same arrow designation weigh the same. I have two sets of PSE 23's. One dozen is between 7-8 grains heavier than the other. These are shafts only uncut out of the package. To get both sets the same finished will require( within 2-3 grains) cutting one set shorter. Which won't be a upper big deal as I don't shoot well enough to see the difference lol. But it is a little frustrating as this the first time this has happened.
I would like see a video or just some information to see what kinda weight insert your would need to get the percentage amount of foc you recommend on a gold tip velocity or a similar light weight arrow for a 60 pound draw weight and 28 inch draw length.
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
I appreciate your honest, unbiased product review videos but at elk shape Oregon you mentioned wanting to make more educational videos. That's something I'd love to see. Keep keeping it real mfjj! 💪🤘
You should check the balance point of the bare shaft, no components just carbon. Wondering if the label affects the balance or if there is a difference front to back. Can you swap the nock and point ends
Interesting how everyone always claims their tolerances are so outstanding on the internet all the time. I had similar experiences with them 4 or 5 years ago when I tried them. Also durability was a little lower than other brands I’ve used. Due to that I wasn’t that impressed for the money and haven’t used them since.
I shoot the Rampage 300 .001 arrows. 27.75" carbon to carbon. 75 grain easton stainless steel halfout. Three fletch w/ AAE max stealth vanes. Standard R nock from black eagle. 100 grain broadhead. Total weight is 455 grains. FOC is just above 14.5%. They shoot great. For the price, you can't beat them.
I am running the 250's at 30" carbon to carbon 540 gr and 14.5% FOC. They have been flawless. Shot my bull moose last year with them and will be using them again this year.
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Can I ask you a favor brother I know this is video is over a year old. I'm planning to set up these Rampages with 30 and 1/4 inches long, with Nocturnals, 100 grain thunderhead and 3 fletch 3 deg AAE Max Stealth Vanes. Thinking i will be in that 450 grain weight. Could you tell me if this would be a good hunting set up in you're opinion and do you think I'll be in the range of a good foc. Shooting a 29 inch draw 70 lbs carbon knight bowtech
I am Curious about the fire knock string stop, I hear it cuts out a significant amount of vibration and adds speed to a v3x. It would be cool to see a review be fore I purchased one
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Great Videos, I bought some 4mm diameter arrows and got home shot them into a Double Duty square bag target and the inserts catch on the materials when trying to pull them out. Any suggestions on a better target to use that easy to pull those type arrows out
Bags and outserts don't mix well. Hard to beat a rinehart or sevr. I have an 18-1, big sevr and a block range bail and only shoot Vap TKO or Vap SS with ethics outserts. The only bag style that's been workable is the Morrell outdoor range but the outserts will wear out the cover pretty quick.
Another great video. Seems that most of your focus is on bowhunting. Any thoughts of making some videos about target shooting, target bow setups, target arrows, etc?
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
I recently bought a 12 pack of Carnivores .001” in 350 spine to practice with my 60# mods and like your Rampages almost half of them were wobbling… managed to make them straight as l cut them short (26.25”) but was not impressed… will stick with my Rip Tko’s in the future!
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
A word of caution to anyone considering the Rampage: I bought a set a few months ago and with a 3-fletch AAE Max Hunter configuration and 175 grains at the front they were flying like laser beams. However after a few months of practice I am now experiencing cracks on the both ends of the shaft. Folks are also complaining about this in the comments on Lancaster Archery Supply. And thank you as always for the video content! I met a guy in Scheels a few weeks ago here in north Texas that met you and said you're a hell of a dude!
Been using Black Eagle for years now and I've never had that much deviation in straightness between arrows and I've shot the Rampage, the renegades, Carnivores, Outlaws, Deep impacts just to name a few.. I've highly recommended them out of my personal archery shop... Keep up the great videos....
Hey Paul what would be your choice between the deep impact, rampage, and Spartans for whitetail hunting?
@Everettsnumber1fan I've used all 3 of those for hunting situations and you couldn't go wrong with either one of those just pick a set and I'm sure you will be happy .just make sure you pick the right spine for your set up...
@@paulshumate2904 thanks Paul, I am wanting to go with the deep impacts, but I was hoping to sneak into a 400 spine but I’m right on the bubble of 350 vs 400. I shoot 58 lbs 28 inch draw out of the new Darton sequel 31. Think the 400 would work to keep weight down? I figure I will cut my arrow to 28 or 27.5.
One of my cousins has used these for years and loves them and can shoot pretty nice groups out to 70 yards with them.
He changed up this year to a GT Black Label Quantum because he is curious to see what else flies well out there.
I like .204 ID arrows and was thinking about getting 3 or 4 shafts of a few brands like Black Eagle 🦅 Victory, Gold Tip, Easton, Sirius to see which tunes best out of my PRIME Black 3 bow, then buy more of the winner.
Thanks for sharing Josh.
black eagle has a brass screw in weight for the rampage half out insert 30,50,75 gr and the half out insert is 52 gr made from steel
Gotta yell parkour when you jump around. The office thought me that lol
Almost went with these but I decided to go to the X impacts with 80 grain aluminum FOCOS outserts with a 16% FOC.
I run same arrow on my
V3 31 and my V3X 29.
Love BE arrows
Running the same setup!
I personally shoot these Black Eagle Rampage’s. My arrows are 300 spine, cut to 29”, I use the stock insert with a 125g point, tac driver vanes and it comes out to 543 grains at 15% FOC. I do have to say the stock inserts have bent on me in the past, so if MFJJ has a solution for that I’d like to know!
Thank you for the review. Plan to give this arrow a try this year.
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Would love a review on black Eagle Outlaws and other average Joe arrows
I wasn't impressed with Rampage when I tried them a few years ago. The nock ends cracked really easily. I don't know if that was because of the shaft or the nocks. Same problem with the Spartans. The Zombie Slayers held up great. They all flew really well.
I since switched to Victory and Easton 6.5 and have been much happier with durability.
It’s 100% the nock. Changed to Beiter and the rear gets crushed rather than splits on rear impact. With pin the pin will dent and bend but the shaft will be fine.
I have a 28" DL, my .001 Rampage arrows are 27.125", I use the 52 grain outsert that is included, 125 grain field point, 3 AAE Max Stealth vanes. 442 grain total weight and 14.8% foc. Great arrow- I just wish the arrow wrap/logo wasn't such a dull color,lol. None of my dozen arrows wobbled like the worst one you had, you might of got an odd batch. I would of probably called the company and sent those back. I have been shooting mine for a year.. great arrows and very well priced. recommended .
I also agree about the wraps being too dull, they are a hard arrow to find.
Bought a dozen once. Destroyed more than half shooting 3D. Every rampage wobbled out the box and had an extreme wobble after the shoot. Went back to rip tko, durable shafts but the insert systems suck for the small diameter. Decided to start the deer season with black eagle carnivore arrows. Found some slightly heavier inserts. After some tinkering I was satisfied with the standard diameter. For now I’ll stay away from small and micro.
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
I just built some Gold Tip Force 300 shafts to 484 grains w/ 19% FOC. I am really happy with those numbers.
Test out some Easton Axis match grade vs regs. Be cool to see the actual difference. Thanks
I shoot Easton axis 5mm 340 spine match grade 001. They fly great and they are strong arrows
Not all batches ( 12) of the same arrow designation weigh the same. I have two sets of PSE 23's. One dozen is between 7-8 grains heavier than the other. These are shafts only uncut out of the package. To get both sets the same finished will require( within 2-3 grains) cutting one set shorter. Which won't be a upper big deal as I don't shoot well enough to see the difference lol. But it is a little frustrating as this the first time this has happened.
I would like see a video or just some information to see what kinda weight insert your would need to get the percentage amount of foc you recommend on a gold tip velocity or a similar light weight arrow for a 60 pound draw weight and 28 inch draw length.
I’ve been using these for 2 seasons love them and cheap!
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
I appreciate your honest, unbiased product review videos but at elk shape Oregon you mentioned wanting to make more educational videos. That's something I'd love to see. Keep keeping it real mfjj! 💪🤘
You should check the balance point of the bare shaft, no components just carbon. Wondering if the label affects the balance or if there is a difference front to back. Can you swap the nock and point ends
Interesting how everyone always claims their tolerances are so outstanding on the internet all the time. I had similar experiences with them 4 or 5 years ago when I tried them. Also durability was a little lower than other brands I’ve used. Due to that I wasn’t that impressed for the money and haven’t used them since.
Awesome thank you 🙏
Sense you mention inserts could you do a video on inserts for 4, 5, 6mm steel or brass for us on a budget kinda person...
I've had great luck with outlaws and the rampage.
Great review . My brother shoots those . Kindly do one on Gold tip pierce platinum's....
I'm thinking maybe not.....
Can you do a review on the Goldtip XT hunters since this is one of the most popular arrow in hunting
Great video, you may of mentioned this in the past but what is your hunting/TAC arrow setup?
I shoot the Rampage 300 .001 arrows. 27.75" carbon to carbon. 75 grain easton stainless steel halfout. Three fletch w/ AAE max stealth vanes. Standard R nock from black eagle. 100 grain broadhead. Total weight is 455 grains. FOC is just above 14.5%. They shoot great. For the price, you can't beat them.
I am running the 250's at 30" carbon to carbon 540 gr and 14.5% FOC. They have been flawless. Shot my bull moose last year with them and will be using them again this year.
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Check out the new Eaton Sonic shafts. The ones that replaced the Hexx shafts.
Target arrow review ps23, ps26. For us more serious shooters. Love the deep impacts for hunting.
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Like to see a review on Easton macthgrade 6.5
MFJJ immediately regretting the intro and realizing his knees are too old for these shenanigans... 9.6 on the landing
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Love black eagle, we sell mostly spartans, zombies & renegades. Not much outlaw at all.
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Will you test the axis long range?
Can I ask you a favor brother I know this is video is over a year old. I'm planning to set up these Rampages with 30 and 1/4 inches long, with Nocturnals, 100 grain thunderhead and 3 fletch 3 deg AAE Max Stealth Vanes. Thinking i will be in that 450 grain weight. Could you tell me if this would be a good hunting set up in you're opinion and do you think I'll be in the range of a good foc. Shooting a 29 inch draw 70 lbs carbon knight bowtech
Will you do a video on the Vap SS arrows. I have a 510g set up at 275fps. Matthews v3x. I can find anything on the internet like this
What releases do you recommend?
You wouldn't use brass inserts either? Just steel?
I wanna see the victory vap tko or the rip tko! Since I believe that’s the most popular arrow on the market right now!
At 70 lb what spine would you run 300 or 350
Could you do one on the gold tip hunter pro please and thank
I am Curious about the fire knock string stop, I hear it cuts out a significant amount of vibration and adds speed to a v3x. It would be cool to see a review be fore I purchased one
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
What type of target holds up the best? I'd like to buy or build a large, 48"x48" maybe, target and leave it outside; any suggestions.
Can you go over your Last Chance Press impact driver modification?
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Lovin the vids MFJJ keep ‘em coming
I would like to see what a Doz. Sirius Apollo looks like. Thanks
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Great Videos, I bought some 4mm diameter arrows and got home shot them into a Double Duty square bag target and the inserts catch on the materials when trying to pull them out. Any suggestions on a better target to use that easy to pull those type arrows out
Bags and outserts don't mix well. Hard to beat a rinehart or sevr. I have an 18-1, big sevr and a block range bail and only shoot Vap TKO or Vap SS with ethics outserts. The only bag style that's been workable is the Morrell outdoor range but the outserts will wear out the cover pretty quick.
Why I bought the morrell high roller, easy to pull collard arrows
If you carry them maybe test out gold tip kinetic Pierce! Id be interested in your Opinion about them and what you come up with
Deep Impact?
Are those standard diameter or micro
Another great video. Seems that most of your focus is on bowhunting. Any thoughts of making some videos about target shooting, target bow setups, target arrows, etc?
I’ve shot these they’re pretty damn good then i went to gold tip pierce ended up back with Easton axis
Josh, what are your thoughts on cutting arrow to an inch or less in front of the rest?
Still missing long draw bow comparison
Does your beard interfere with string or fletching and effect arrow ?
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
I recently bought a 12 pack of Carnivores .001” in 350 spine to practice with my 60# mods and like your Rampages almost half of them were wobbling… managed to make them straight as l cut them short (26.25”) but was not impressed… will stick with my Rip Tko’s in the future!
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Sirius archery apolo offers a 150 spine they just don't advertise it I've got some
I’m 26 and thinking of jumping off a table like that hurts my knees
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
I have shot a lot of different arrows and I find Black Eagle arrows to be the least durable of all the bigger companies.
Rampages come with a stainless steel half out so you should be just fine
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Been shooting these for the past year without any issues. Killed a bull moose last fall and the arrow did its part.
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
I'll stick with BLu-RZ 350s
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅
Nice to see someone pick-up on company quality bullshit ......too many say the best and are selling crap ......
Agreed 👍👍
I just checked a dozen of these same arrows and I only had 1 that was unacceptable. I'm guessing you got a shitty batch.......or I just got a good one
I found 4 unacceptable, must have got bad batch. Going with different arrows next year 👍
Rampages are brittle. I don't care how good their tolerances are if the arrow isn't durable it's trash..
Facts I had 6 of them and something went wrong on 4 of the 6 within 10 days never had a problem with any other arrow
Have you tried to contact me
Congratulations you have been selected among our shortlisted winner, contact the number above for INTERACTION on claiming your prize ^^^^^^^^^^^^^^^^^^^^^^^^^^^^✅