Integra GSR Skunk2 Intake Manifold INSTALL | PART 2
Вставка
- Опубліковано 20 жов 2024
- Part two of the Skunk2 intake manifold install on my 1994 Acura Integra GSR.
Be sure to check out PART 1 if you haven’t already: Integra GSR Skunk2 Intake Manifold INSTALL | PART 1
• Integra GSR Skunk2 Int...
***Amazon link***:
Skunk2 Intake manifold for GSR: amzn.to/48eRDYn
Skunk2 Throttle body: amzn.to/4aHTx5c
Thanks for watching!
Follow me on Instagram @spencers_garage
Great Video!!!
Thank you for watching!!
I'm def going to be doing this to my jdm gsr engine in my eg si hatch! Awesome series!
Lovin this series, hope to see more
hi, not sure if i missed it but can you tell me where to plug in the evap purge valve?
Can you do a video on how you installed your hoses for your purge solonoid?
amazing video
i know im super late and idk if you have already cut the valve cover, but they make a clear cover for B series now.
@@imrambosgrandad578 interesting. Where do they sell it?
How come you didn't use the P73 hoses for the PCV valve? it has a special curve for it to be routed to the intake manifold.
Because the intake manifold hose inlet is in a different position than the stock manifold inlet. Therefore, a custom hose needs to be made.
Hey Spencer! Loving the build so far! I DMed you on IG!
i kind of skipped around through your video but where is the part where your hooking up the vacuum line for the 2 way purge valve ?
I would like to know as well.
Hey man I got a question. So i installed my skunk2 intake onto my GSR(2000). After i put it on it started throwing codes (cylinder 4 misfire, idle control valve). I put the old one back on and they went away but the idle was jumpy. Now its throwing a code for the idle control valve. I know the plug ripped off so inhad to wire it back on. Im assuming the connection isnt strong so ordered another one to wire on. As far as the misfire any ideas on why it caused that? Its not showing any codes for misfire anymore but the idle is still jumpy between 1500-2000
Clean work, did you just leave your IAB tuck to the side in the time being?
You mean the wiring harness? I have a Rywire tucked wiring harness, it does not come with a IAB connection.
Did u loop the tb ports on the bottom of it?
Did you do something different with the fuel rail studs? looks like you switched to black Allen bolts? reason for that? Great video BTW!! I have the Skunk2 IM and a SF throttle body ready to be installed.
I will be installing a skunk2 fuel rail here soon, so those will be changing.
great video!!! can you provide the link to the manifold extended hardware from BLOX RACING ?
bloxracing.com/products/stainless-steel-intake-exhaust-manifold-studs-m8x1-25-55mm-singles-7-10-piece-kits?variant=44145703092468
Hey that orange barb in the back, what size is that and where can I get it
soo clean!!!
Not 0:20 seconds in im like please dont drop that and mannnn
Where did you get the hardware/braket for the throttle cable that is bolted on top of the manifold and are you using the alpha series throttle body or the pro series throttle body for the gsr? Thanks
In the video you can see that the hardware and bracket is Honda OEM. I got it from a Honda/Acura dealer. TB is Alpha.
What is connected to the bottom of the fuel pressure regulator?
The fuel rail
*Hey Spencer, what's the Part # for the Vibrant hose?*
20415
Where did you hook up the little port on the back of intake
Good Ol A-Aron. Well, watch the entire video and your question will be answered, I cover it all in this video and part 1. Thanks for watching buddy!
On the fuel pressure regulator just polish and then coat it in laquer stop it rusting
Good job bro
Appreciate it!
You didn't check the gap on your plugs. I bet they are incorrect
NGK plugs come pre gapped and I’ve found that they have been set correctly
every time I have installed them in my experience. However, I still always check the gap anyways.
@@spencersgarage only reason I make the comment is because I just went through the same thing with mine. The plugs have been coming pre gapped at 0.044 and the gsr requires 0.052
What headers are you going with?
Hey there buddy! As said in the video, Skunk2 Alpha.
Thanks Spencer. Most people go with DC but I will definitely check the alpha out!
@@elalardoso18 I have a video coming out soon with the header install.
Awesome Spencer, looking forward to it and thanks much for sharing!
What did you do with the IAB valve?
Deleted it