How to Replace Left CV Axle Assembly 2007-2012 Nissan Versa

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ib/1AAC...
This video shows you how to install a new passenger CV axle assembly in your 2007-2012 Nissan Versa. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oboL/1A...
• Impact Screwdriver 1aau.to/obV/1AX...
• Pry Bar 1aau.to/oWe/1AX...
• 21mm wrench
• 21mm Socket 1aau.to/oakJ/1A...
• 22mm Socket 1aau.to/opk/1AX...
• 30mm Socket
• Dead Blow Hammer 1aau.to/oV7/1AX...
• Trim Tool Set 1aau.to/oafo/1A...
• Pliers
• Air Chisel 1aau.to/obQ/1AX...
• 5/8 Inch Socket 1aau.to/obFR/1A...
• Ratchet 1aau.to/obFR/1A...
• Torque Wrench 1aau.to/oaJV/1A...
• Cloth Rags 1aau.to/oDX/1AX...
• Cotter Pin
• Gloves 1aau.to/oag7/1A...
• Rust Penetrant
• Safety Glasses 1aau.to/o93/1AX...
• Chisel 1aau.to/ok6/1AX...
• Drain Pan 1aau.to/oA5/1AX...
• Floor Jack 1aau.to/o9r/1AX...
• Funnel 1aau.to/oio/1AX...
• Hammer 1aau.to/oV7/1AX...
• Jack Stands 1aau.to/oWG/1AX...
• Small Hook
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@josefranciscoesquertalaman3827]

Presente en las aventuras de mecánica automotriz cordial saludo desde NAVOJOA Sonora México

[@progearster]

Do you have to do the front wheel alignment after replaced the cv axle?

[@randymalkoski8155]

Hello!
Is this process the same for either a manual or automatic transmission?
Also, what would one do if one added too much transmission fluid?

[@MrJeepmarine]

How do you know if you need a new CV? Axle?

[@michaelmartinez9602]

So I need an alignment after this procedure ?

[@TRQ]

+@michaelmartinez9602 Yes, an alignment would be needed after this installation.

[@jimmyhsv7791]

Stopped watching after two minutes..couldn’t listen to ‘go ahead’ before every sentence anymore.