First off its primary uses probably to deliver empty storage containers and second if someone is going to move a loaded container learn how to load and lock in the cargo it's that simple.
The inclination looks more than 30° goods inside the container may get miss balance recomend to use 4 hydraulic jack heavy-duty sides weights may vary due to this tyre itself cannot balance the structure/container the truck is lifting, if rocker arm able to life varing loads(coz. Of inclination) other wise design is impressive. Innovative
Maybe a good idea, but it´s not working here in Germany.With this 3 Axle Truck you are maybe allowed to drive 10to Loads.It depends what the Truck is weighing empty with the Framework.At least our 4Axle Trucks are allowed to weigh full 32to.So figure out.
Aqui no Brasil, não tem este equipamento, ou seja, não que Eu saiba, meu patrão improvisou, no container um perfil em baixo, para pegar com o Roll on Roll off, como é chamado este caminhão por aqui.
This better be for empty containers. Otherwise id be pissed to have everything smash against the back door. Especially if i had a car strapped down inside thats only ment to stop shifting side to side, not take a 55° tilt to go onto a truck..
Snipe Stud00 Should not the load be tied so that it can not move in any direction? Atleast I was thought that load securing should hold whole of the cargos weight fromt the front and half from sides and back.
it is also used for loaded sea containers. That is why the load inside the containers needs to be secured. A lot of military use this system because of it multi-purpose system and can handle many different jobs.
George WL, you're just a nut, correct? I'm just admiring the machine design elements. The application is up to the user; maybe he needs to deliver empty conexs.
Dieses System ist nicht gut, weil beim Aufladen und Abladen alle Dinge im Container nach Hinten fallen !!! Einen Container bitte nur wagerecht anheben und senken !!!!!!
Da spricht ein echter "hust" Experte.Schon einmal einen Seefracht Container geladen und vorschriftsgemäß verzurrt und gesichert? Ich behaupte Mal,ein klares NEIN. Gerade wenn irgendwas sich da bewegt,lief bei der Ladungssicherung etwas gewaltig schief.Die folgende Strafe plus Regress des Kunden sind die verdiente Folge
@@Benni81 Richtig, außerdem wird das gezeigte System vermutlich eher bei Containervermietungen oder -transporteuren, die eigentlich nur leere Behälter bewegen, eingesetzt werden.
hey ,if anyone else needs to find out about build a shipping container home try Sovallo Container Build Fixer ( search on google ) ? Ive heard some incredible things about it and my buddy got cool results with it.
i drive hooklift truck as my job and i have 3 about 24ft containers with weight sometimes like 44.000+lbs never had any broblens with tipping tuck or anything.
Was looking for videos about cargo damaging inside containers - UA-cam is smart enough to push this to me
First off its primary uses probably to deliver empty storage containers and second if someone is going to move a loaded container learn how to load and lock in the cargo it's that simple.
Can you talk to SCS Software and add this into ETS2?
This definitely needs to be added to euro truck simulator 2
SCS software, could you pay some attention please?
great multilift commander, i need two units asap
Hahahahahhahahaha
Wait your turn
Thanks for the demo. Does this version wor for both 20 feet and 40 feet containers ?
Thank you
this is a good concept. the slant off the truck is 45 degrees
Hey Guys, ist it only for 20 feet? Or ist it possibel for 30 feet?
And what will happen to the cargo inside the container after such loading and unloading ???🤔🇺🇦
my thoughts exactly !
Благодарю
А какая грузоподемность установки ???
Swiss Army uses this System on Iveco Trakker 8x8 it‘s a very good system
Its so nice to load heavy containers
The inclination looks more than 30° goods inside the container may get miss balance recomend to use 4 hydraulic jack heavy-duty sides weights may vary due to this tyre itself cannot balance the structure/container the truck is lifting, if rocker arm able to life varing loads(coz. Of inclination) other wise design is impressive. Innovative
This is my job and I love it ❤...and the secondo lift its amazing
Maybe a good idea, but it´s not working here in Germany.With this 3 Axle Truck you are maybe allowed to drive 10to Loads.It depends what the Truck is weighing empty with the Framework.At least our 4Axle Trucks are allowed to weigh full 32to.So figure out.
Well Done, nice product
I am trying to figure out this video looking very nice but is this a HO Scale Model and if it is where or who supplies the parts please
Do you have an distribution in the USA , can the trolley be extended as long as 53 Ft?
Brilliant . Sufficient .🦄
I hate working on this sort of stuff. Battered to bits, wings hanging off, lights smashed, oil leaks, Idea looks great
Can use container 20', only
For trash containers perhaps. But not shipping containers. All the stuff inside would fall over. Spill out. etc etc.
Witam czy można tytuł muzyki. Dziękuję za odpowiedź
I like the design but the incline is too steep at its pitch with such a short length container for this concept
This is not a concept, it's widely in use in finland
I belive the Norwegian army is using this.
Aqui no Brasil, não tem este equipamento, ou seja, não que Eu saiba, meu patrão improvisou, no container um perfil em baixo, para pegar com o Roll on Roll off, como é chamado este caminhão por aqui.
Still would rather have a standard cable roll off. How heavy are these hooklifts?
it can drop a 50,000 pd. load
Mantep nih kalo ada di ETS 2
What spec to play
This better be for empty containers. Otherwise id be pissed to have everything smash against the back door. Especially if i had a car strapped down inside thats only ment to stop shifting side to side, not take a 55° tilt to go onto a truck..
Snipe Stud00 Should not the load be tied so that it can not move in any direction? Atleast I was thought that load securing should hold whole of the cargos weight fromt the front and half from sides and back.
Snipe Stud.. was thinking the same, sure you tie things down but against such a steep angle ??
Snipe Stud00
it is also used for loaded sea containers. That is why the load inside the containers needs to be secured. A lot of military use this system because of it multi-purpose system and can handle many different jobs.
perfect idea
👏super idée 👌
似たマルチコンテナ車乗ったけど、背負うとき中身ぶっ倒れるから。産廃系なら良いけど、、、
Cool wäre wenn das bei ETS2 bei dem LKW Spiel auch möglich wäre
what is the game
i tought it was a game lmao
If you're only moving empty 20 foot containers you might as well just use a rollback it's a much cheaper option and faster
this lift can drop a 50,000 pound load.
コンテナこんなに傾かせて荷物大丈夫なの
The US Army HEMTT does this too.
Now let’s move a 40’ container.
Für leere Container ganz brauchbar, aber wenn diese voll beladen sind, kann man mit der Technik nicht viel anfangen.
Was bringt dich dazu das zu denken?
Barang yang di dalem nya itu gimana bisa ancur
currently available mod in FS19
20fters only looks like
Is it a game ? Name of this simulator game
Interesante su tecnología
är detta ett spel man kan ladda ner eller köpa och sen ladda ner ?? villha det för jag är sjut intresserad av det
:)
Lundstén motorsport «
Is this a game a RC or a actual SCANIA?
What computer game is that?
none
Name game ,what animation
What for thé game ets2?
Так вот зачем отверстия в днище контейнера))
Апарат очень классный!
Контейнеровоз - воровайка))
Cool
DumbledoreMcCracken bullshit! What are you going to have inside that you can lift like that? Make a mess and destroy the pallets.
George WL, you're just a nut, correct? I'm just admiring the machine design elements. The application is up to the user; maybe he needs to deliver empty conexs.
That takes WAY too long!!!
Yea, unless you need to lift containers all the time, I'd say stick to the old fasioned way :P
I used this in Swiss army, it takes only 2 minutes when you had some practice
takes like 4 mins
Couldn't you just weld something on the container for the hook to grab....?
Game?
Dieses System ist nicht gut, weil beim Aufladen und Abladen alle Dinge im Container nach Hinten fallen !!! Einen Container bitte nur wagerecht anheben und senken !!!!!!
Da spricht ein echter "hust" Experte.Schon einmal einen Seefracht Container geladen und vorschriftsgemäß verzurrt und gesichert? Ich behaupte Mal,ein klares NEIN. Gerade wenn irgendwas sich da bewegt,lief bei der Ladungssicherung etwas gewaltig schief.Die folgende Strafe plus Regress des Kunden sind die verdiente Folge
@@Benni81 Richtig, außerdem wird das gezeigte System vermutlich eher bei Containervermietungen oder -transporteuren, die eigentlich nur leere Behälter bewegen, eingesetzt werden.
Please music)
hey ,if anyone else needs to find out about build a shipping container home try Sovallo Container Build Fixer ( search on google ) ? Ive heard some incredible things about it and my buddy got cool results with it.
GEMS apa
So nub they can’t fit it like that all the things inside will go down what a video is this
Animation is not the real thing.
ETS2 DLC 😝😝
So yeah stop wasting your time and put a grabber on the front of that container put it on the rollers and roll it up
3D
What game it is ?
Rayyan Bhunnoo not games.
How old are you? Probably about 12 lol
What your name game
Gamer Vedeo Not game.
Container20$ok😅😅😅
不實際
I would like to see pick up a 20 footer with 40,000 lbs. It will flip over that cute truck.
Flip over an animated truck..
A tandem truck 20000 in a 20ft can is about the bridgeable limit.
i drive hooklift truck as my job and i have 3 about 24ft containers with weight sometimes like 44.000+lbs never had any broblens with tipping tuck or anything.
too complicated
ةزن
ذةؤنبظر بم 👍👍ىكن
10,,,,,,,,,,,,,,,,
ಷನಂ ಐ
ಮಮದಂಚ
way too much handywork to do - totally ruins all the advantages of the hooklift !
Are fucking stupid or something ?? It adds more usage for the hooklift...
what size container 40 s
It shows a rigid truck. Never seen a rigid that can take a 40 foot container.
20'