Great video man. I ordered this yesterday after 2mothes of watching videos, and this is far the best one. Nice to see it can do vertical cuts aswell. I started with tuning 5years ago, and now adding up with key programming and cutting, starting at the bottom and if i get enough jobs i thinking of make it a job and upgrade to a automatic one :)
Instead of this you should buy the Chinese vertical cutting machine, you’ll save a whole lot of time cutting keys than this machine and that machine is around $110, and keep this one just for high security key, that’s what I did when I was starting to cut keys, this takes to much time to cut a regular key.
@@cornchips007 the machine went up since when I got it, the first comment is the one I started with, but I’d recommend you go with the second one I post because it have a cleaning wheel and more fine tune adjusting if you’re going with these cheaper machines. 110V Laser 2AS Horizontal Cutting Copy Duplicating Machine DIY Cutter Tool
They seem to go on and off of Amazon for some reason. Here's a link to one on eBay it's the same price as the one I had purchased. www.ebay.com/itm/115056864013?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Namue0ftRIG&sssrc=2349624&ssuid=LBX02x1dRMK&var=&widget_ver=artemis&media=COPY
Hi thanks for this video very helpful, question about your Ancel device I have the X7 version and I'm trying to program keys to my ford but i don't see ford listed,does this mean ANCEL doesn't support ford? For programming keys
La máquina no es la indicada para ese tipo de llave, supongo que no eres cerrajero, deberías dejar de hacer este tipo de cosas que solo dan una idea errónea a la gente
Tienes toda la razón amigo, yo tengo la duda con estas maquinas chinas acerca de su calidad, sera conveniente comprarla para un local de copias de llaves??
this is great,kindly do more videos
You are supposed to replace the clamp tightening nuts with the plastic knobs.
Great video man. I ordered this yesterday after 2mothes of watching videos, and this is far the best one. Nice to see it can do vertical cuts aswell.
I started with tuning 5years ago, and now adding up with key programming and cutting, starting at the bottom and if i get enough jobs i thinking of make it a job and upgrade to a automatic one :)
Awesome, that's the exact reason I made this video because I couldn't find any content on them! Good luck with it!
Take the nuts off and install your wing nuts, works good. Maybe you can show how to set depth on cutter and guide?
Instead of this you should buy the Chinese vertical cutting machine, you’ll save a whole lot of time cutting keys than this machine and that machine is around $110, and keep this one just for high security key, that’s what I did when I was starting to cut keys, this takes to much time to cut a regular key.
Link? This machine looks so painfully slow
@@cornchips007 110V 100W Duplicating Machine Horizontal Copy Machine Cutter Cut Engrave Machine
@@cornchips007 the machine went up since when I got it, the first comment is the one I started with, but I’d recommend you go with the second one I post because it have a cleaning wheel and more fine tune adjusting if you’re going with these cheaper machines.
110V Laser 2AS Horizontal Cutting Copy Duplicating Machine DIY Cutter Tool
@@Hugolopez732 where did you purchase this at?
@@user-oq6nn8fg5c I got it on eBay.
video good brother thank you for shaing
You're supposed to remove the nuts before attaching the knob.
Great 👍
Thank you
Awesome, by any chance does the tablet work for motorcycle keys as well ? Thanks for sharing 👍🏼👍🏼👍🏼👍🏼👍🏼
I am not sure about that. I do not have any to test it on.
Hi, just a quick question, which size or angle cutter you use for this type of key?
Thanks for any answer
Unfortunately I don't remember. Its the one it came with if that helps
What are you do for all keys lost situation??
Can't do that with this unit
hey, remove the nuts and use the black handles only.... i had that trouble too until i figured it out
Awesome thanks for the great tip!
Your welcome, get spare belts
When you buy the new key is there a immobilizer chip already?
Yes, most if not all car keys on amazon come with chips
Nice
thanks alot
How much cutting mach3
did these bits come with machine?
Yes they did
Hope i can prgram my key fob for 09 ram this easily, i just got the X7
Should be able to just fine.
Gotta take those nuts off the jaws and use the wing nuts the nuts are just there for transport.
How much was the dp500. Can't find it on your Amazon link. Seems like it doesn't exist.
They seem to go on and off of Amazon for some reason. Here's a link to one on eBay it's the same price as the one I had purchased. www.ebay.com/itm/115056864013?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Namue0ftRIG&sssrc=2349624&ssuid=LBX02x1dRMK&var=&widget_ver=artemis&media=COPY
Does it need a yearly membership like the topdon?
It does not.
👍🏽👍🏽👍🏽
Hi thanks for this video very helpful, question about your Ancel device I have the X7 version and I'm trying to program keys to my ford but i don't see ford listed,does this mean ANCEL doesn't support ford? For programming keys
Just make sure you download the updates and you should be able to use it with a Ford
Great vid. Thank you!
You're welcome!
How much cutting mqchine
Used to be about 150 to 200
How much this cutting machine
It's usually about 180 usd
Сколько стоит аппарат
La máquina no es la indicada para ese tipo de llave, supongo que no eres cerrajero, deberías dejar de hacer este tipo de cosas que solo dan una idea errónea a la gente
Tienes toda la razón amigo, yo tengo la duda con estas maquinas chinas acerca de su calidad, sera conveniente comprarla para un local de copias de llaves??
You might as well buy a silca Bravo machine personally
Clown
Ypu talk lot of crap. Juat let me see hpw ro stwal a car