How to Restomod your engine bay - Project GSR gets a refresh | Mitsubishi 4G63 | fullBOOST
Вставка
- Опубліковано 25 сер 2024
- How to Restomod your engine bay? We headed to NextLevelTM to get a catch can fabricated in our Mitsubishi Lancer GSR and we decided to do a little restoration on the engine bay. This is the end result!
Next Level Technical Motorsport
nextleveltm.co...
JDM Restomod Australia
jdmrestomod.info/
If you’d like to be notified every time we upload a video, subscribe and then click the bell icon 🔔 next to the subscription button.
www.fullBOOST.c...
Get your track gear!
shop.fullboost....
Follow us on social media @
UA-cam
/ fullboostcomau
Instagram
/ fullboostcomau
Facebook
/ fullboostcomau
Twitter
/ fullboostcomau
COPYRIGHT WARNING:
The above video is copyrighted © to Fullboost
You do not have permission to download it and re-upload it anywhere in any form. You can click the share button on UA-cam for that, or copy/paste the URL to social media.
#fullBOOST #4G63 #AWD #mitsubishi #lancer #projectGSR
One of the best cases of upselling I've ever seen.
I'm old school with my JDM and that means show quality under bonnet fitment. Seeing someone else remove every nut and bolt and bracket to refurbish them makes me feel like Im not completely bonkers there are others who like it just the same. Baz great work mate
One of the best videos on the channel it made me want to buy this gsr even more than I already do
Love how its show car clean, but still fully street functional. So sick.
STEP 1 : Spend money
STEP 2 : Repeat step 1
The attention to detail is.
Next Level 😎
a year later still drooling over this
This really satisfies me
Love the attention to detail and utilising all factory mounting. Car looks amazing
We headed to NextLevelTM to get a catch can fabricated in our Mitsubishi Lancer GSR and we decided to do a little restoration on the engine bay. This is the end result!
*If you’d like to be notified every time we upload a video, subscribe and then click the bell icon 🔔 next to the subscription button.*
Get your track gear! 👉
shop.fullboost.com.au
Could you use a oil/air separator used on air compressors as a catch can ??
The new bolts make so much difference 👍
This is the video I needed badly...I will be calling these guys asap
Engine bay looks mint 👌🏼
I desperately need a custom air box for my car, my DIY job isnt cutting it
Use your new good goin out wiring skills to bang in a set of Sony X-Plod 6x9's in the rear parcel shelf, nice and high , and she's all set 😅😅. Resto turned out tremendous mate thanks for the updates as always
My GOD this thing is MINT!
Poo in your jocks
@@ashleyberry5022 ثوص. غغ
outstanding work and build, good to see love and attention to detail compared to every car build being 1000hp and hacked apart.
I just picked up a Galant VR4 that Barry worked his magic on the engine bay of. In person, it's absolutely stunning. These videos don't do it justice, believe me
Oh hell yes Geordie, full K.Rudd spec, F'n mint. 👌 I know personally how hard refurbishing old JDM parts is but it's rewarding work when you do it right, so full credit to Baz for going that extra mile for you bro. 👍
Them hand pointers are so funny!
Some more gsr content I've been waiting
done something very similar to my GTiR. OEM +. It's the way to go
That is a epic job guys
Wow! Bazz does some awesome work, like you said quality work and attention to detail 👌
Left ya car outside the Next Level. Nek minut.
Nice filter choice. BMC make really nice filters.
She is a mint package mate
The CC GSR was such a head turner since they were so rare!
Still are 👌
@@renegadeone2058 I've not seen one in twenty years maybe so.... More like extinct than rare lol
@@ayske1 yeah they not the easiest to find ay especially stock ones
Something something something Barra!
(The responsibility for Barra comments on Fullboost videos shouldn't fall to me. We need team players here.)
Beautifully done. 🥰
YOU GUYS ARE KILLING IT,,,,,I ONLY WISH FOR MORE VIDEOS THANKS FOR YOUR TIME !!!!!!!!!!!!!!!
That is very very neat, I really like it, great job.
Great to see high quality attention to detail work. 👍🏻
What an awesome set-up !! 🔥👌
Baz ohh now it all makes perfect sense. Lives and breathes it more way then one.
Good refresher and improvements on the GSR very tidy upgrade 😎👍
Looks amazing 👌👌
After watching this vid I want another evo 2 rs.
That's great love this gsr and Baz is a weapon
Awesome work boys @NextLevel
Wow, that’s next level.
Looks amazing, great work !
Nextlvl did a mint Job. Looks so good
Awesome little car, good work boys
That ra23 in the back during the wiring ❤❤❤❤
Great video as I do like early Mitsubishi performance offerings, not so much the newer variants! The engine bay came up a treat thanks to Next Level! The voice over was a bit monotone to be frankly honest, just constructive criticism...
Great update 👍🏻
Awesome detail. Looks mint
SUBSCRIBED WITH NOTIFICATIONS!!!
Time and money well spent. This looks way better than the factory ever made it
Definitely the objective ! I want this thing to last another 30 years *fingers crossed*
F me thats amazing work, its dumb how a few freshened up parts can make the biggest difference
And the multi use catch can / intake box is a super smart use of space. If it had a 3D printed plastic lid, it would almost look factory - super well thought out
Awesome restomod. Can’t wait to see more ! Subbed
That's cleannnnnnn ❤️
Beautiful work gents :)
Very nice job
excellent work gentlemen
nice Wira dude
Very very tidy 👌🏻
Nice.
Nice well done
I got a sneak peek of this car there and quick once over with Baz. Really nice build👌..
hmmmm pah, hmmm pah, hmmm pa paaapa pa pa pah😴
Amazing work as always from next level! Wouldn't take any of my cars anywhere else!
I’d love to know more about the labels used on the looms. I’ve struggled a bit with using that mesh loom sheathing. Freys like a mofo. Found it slips out of the heat shrink but I take it that it’s me, not the products. Good fun anyway.
Try and find some 3:1 ratio shrink if you are having trouble getting a good enough grip on them. Most the off the shelf stuff is 2:1. With the labels, a really cost effective way of doing it is to print out what you need on an excel spreadsheet, cut them out, and then just use clear heat shrink over the top. Alternatively you could use a dymo label printer and clear heat shrink, or go full baller and use a label printer that prints straight on to heat shrink. Those machines are cheap enough, however the heat shrink reels are close to $100 each.
Glue lined heatshrink and if you can spend a bit extra Raychem is a top brand to use. Just remember this duel wall stuff can set fairly hard
@@BroomysGarage Thanks Broomy. I have a new skill to learn. I guess I’ll make a bunch of practice looms and try it out. Then progress to the engine loom once I am better at it.
@@s15melb Good to know. Looks like I failed not using tube that doesn’t shrink enough and doesn’t have the melt. Thanks for sharing your knowledge.
You need high temp tolerant Braided sleeve.. the stuff used for home AV systems doesn't cut it. Look for properly rated engine bay or quality Braided sleeve . Heatshink in clear needs to be as small as possible. The larger diameter the worse it'll look when shrunk. As broomy called out... just order lots of sizes and hopefully you'll have a nicely fitting one for minimal shinking (clearer, almost invisible which shrunk).
HELL YES get the big dog turbo in there
What even was that, a GTX4088R?
@@ChristopherHallett Probably? looks like it's +60mm from the ole eye ball gauge
Mint 👌
it have been a while since last update of this gsr...noice
Mint! 👌
mint.
God I wish we had a place like NextLevel here in the states....
Move over here mate, great place , plenty of shops.🇦🇺✌🏼
Mint
absolutely fricken amazing!!!!!!, ashame their in VIC and they dont do Euro cars
Euro😒.. hmmmm pah, hmmm pah, hmmm pa paaapa pa pa pah😴
nice work how should be done well done shame its missing four cylinders
Now the underside of that bonnet needs a good detailing!
Hopefully you never get rid if this ride, so cool
Superrr nice!
Hey Baz, wana replate my entire GTSt? lol
Let's do it
the vented catch cans are important if u run high horse power 4g63 not on stock engines like this... coz if pressure isnt vented above 600hp you can run in to head lifting problems.
The pressure is always vented mate, it either goes to atmosphere, or back into the air box. Makes zero difference to crank pressure.
Forklift spec oil fittings
Far better quality than the stuff they fitted
Where did you get the intercooler pipes? Seems they are not made these days and need to be custom fabricated.
They came with the Lancer originally i believe from the previous owner. We are guessing it was an original mandrel bent alloy plazmaman kit.
Great build I really love your videos'
My only question is, why are the radiator and oil cooler are painted? I believe that it affects the cooling efficiency because of the added layer of paint .. I think that's why factory radiators are not painted even in race cars 🤷♂️
Thanks.
That radiator came polished. I didn't think that would suit the car. The car has never had a cooling issues and been tracked a few times.
What battery is that? It's very compact. Did you have to modify the wiring for the battery?
Odyssey battery
Odyssey PC680. Wiring was uncut. I just changed the battery terminal to suit.
Looks mean where about they located I’m from Victoria
The only car that I would trade my Galant VR4 for 😵
Looking to do this same setup, do you have any specs/links on the battery and tray?
Is that an aftermarket spark plug cover?
yeah, its alibaba spec,
Poor blokes god ocd couldn’t let it go perfect
Baz using zinc coating on things? Hope he didn't learn that off Mr Gatt...
hi im malaysia but my engine 4g92 wira 1.6
Ah yes, my high school years right here. If Yu couldn’t afford an Evo, it is the gsr.
who else is team GSR > EVO, I dont see a problem with it as long as the 4G swap has been done well, and considering how hard to find EVO 1/2/3's are
Wish I bought a real EVO many years back :/
What are the dimensions of that overflow tank, catch can and intake box?
Why do you need that? Can clearly see it fits well.
@@fullboost well, my car isnt turbo and didn't need a catch can, and that looks cool. Cold air intake box look cool too. 1994 Proton Wira Persona
power steering cooler upgrade
How much for an engine tidy up like this? My Evo is looking a bit dirty under the hood
Best to contact Baz at jdmrestomod.info/
Send an email to info@jdmrestomod.info or submit an enquiry on the page jdmrestomod.info
Please sir one modele the cars where is the prix svp merci sorie no speak english juste litul
How did you get your engine engineer to pass to use in the vehicle? I got a 93 gsr with 95 4g63 motor in it I’m trying to get the motor engineer because the guy own it they didn’t do it really need your help cheers man
Engineering should be quite easy as the engine comes in the same chassis (Evo). You'll probably need Evo brakes etc.
Mine came with an engineers certificate, engine had been registered to the vehicle so it's all legit.
@@fullboost do you know anyone in melbourne that do it ?im from the western suburb
Cheers man
What about modifications and that do I have to go stock or just leave as it is
schmick as f*ck 👌🍻👍
Cost? Bet it's tru the roof!
What's so costly?
@@fullboost having three experts doing custom fabrications, powder coating, disassemble, reassemble, electrical wiring, and parts upgrade for many days at a work shop, that's a lot of man-hours, that can't be inexpensive. I'm also building a 4g63 motor, most car guys really can't afford what u just did easily.
7:44 was that a leak?
Great spotting ! Yes water from washing her before filming.
😍😍😍😍😍😘😘😘😘😘😘😘😘😘
Please please please paint that passenger side guard
the whole car will get looked at soon. I have a genuine front bar now and guards are coming.
One motors Mitsubishi numbers one is the v6 in twin turbo yes ess ok for mie Just forged 1800 ch is litul turbo is soupapes is titane
I would not give false advice on saying raceworks stuff is better than industrial spec (forklift) fittings... the cheap auto fittings are jic threaded fittings btw..... I would like to see raceworks or any of these cheap "automotive" fittings handle 2000psi
Firstly thanks for your comment and allowing us to clear up this 'false advice'. The JIC (forklift spec) hose in question, as you can see was Parker 836 Push-Lok series with a pressure rating of only 300-400psi. The Raceworks hose we opted for in this application is 140 series (with an operating pressure of 1000psi. And burst pressure of 5000psi)
Wira
terima kasih
@@nextleveltm6091 welcome
Bro relocate the battery to the back
I don't want that in the boot, I carry camera equipment in the car.