New here. Thanks for making this video; it was just what i was looking for, man. Every time the backing music came on, I thought of Grange Hill. lol Showing my age now!. Subbed
@TheBeardx16 😆😆 Grange hill 😆. Now that's a blast from the past 😆. Sorry about that, I only have a limited selection of music to choose from because of copyright issues.... so grange hill was my only option 🤣. Thanks for watching and thanks for the sub, much appreciated 😁👍.
😁 Thanks Chris. New safety trainers have just arrived (thanks to a small premium bond win), so hopefully no more toe removal episodes for me 😆. Thanks for watching mate 😁👍
😆😆 At the rate my channel is growing i should have put "Long service acheivment" at the bottom 😆. Or " I had hair when I started this channel" award 😆😆. Thanks for being one of the original 6469 James 😆, and thanks again for watching 😁👍
Hi Frank , How are you ? can you help me, I have a sculpfun s9 . My job is Vinyl sticker cutting . not a reflective .only vinyl sticker. can you tell me how much setting for this speed and power in Lightburn ?
@sailingstardreamer 🤔 I didn't use the pic free vinyl. But the fumes weren't too bad, but I do use some decent extraction in the workshop, so this wasn't really an issue. But it would have been much better if I had a good enclosure. Thanks for watching 😁 👍
Hi Frank, Good demonstration and it's come out well, so it's a little wonky it will probably be the slate if it's Welsh slate, from Blaenau Ffestiniog. As always a great video mate, Take care
😆😆 Thanks Shaun, 😆😆 I think its some cheap slate (it has a failed CNC carving on the back side 😆. If it was Welsh slate I'm sure it would have been worth taking a bit more care 😁. Thanks as always for watching mate 😁👍
@@kova_zg Hi Tomislav, the video was more to show the process of cutting and transferring the vinyl. So people could use this method to make designs for any surface. Thanks for watching 😁👍
😁 Sorry Stephen. I do try to mix it up a bit where I can. But at the moment I have a lot of laser projects on the go for a couple of weddings we have coming up. I can only video whatever projects I have on the go. I'm sure it would be different if I were being paid to make these videos but at the moment it costs me money every time I post a video ☹. If there is anything in particular you would like to see just let me know and I'll try to fit it in where I can. Thanks very much for watching Stephen. I'm sure ill soon find a new favorite subject 😁👍
On Reflection, Frank, a very interesting vid😎😎😎
😆😆 Very good Tom, I see what you did there 😆. Thanks for watching 😁 👍
New here. Thanks for making this video; it was just what i was looking for, man. Every time the backing music came on, I thought of Grange Hill. lol Showing my age now!. Subbed
@TheBeardx16 😆😆 Grange hill 😆. Now that's a blast from the past 😆. Sorry about that, I only have a limited selection of music to choose from because of copyright issues.... so grange hill was my only option 🤣. Thanks for watching and thanks for the sub, much appreciated 😁👍.
Thank you for clear straight tutorial
😁 Your welcome Robin. Thanks for watching 😁 👍
You are a shining light frank 👍good job
😆 Thanks Rod, very good 😆. Thanks for watching mate 😁👍
😁😆Another Frankly good video. You must be selling laser glasses to pay for new shoes. 😚Thanks for the video, and all the best to you my friend.
😁 Thanks Chris. New safety trainers have just arrived (thanks to a small premium bond win), so hopefully no more toe removal episodes for me 😆. Thanks for watching mate 😁👍
Should have added the massive 6,469th subscriber achievement to it 🤣 Those 100k ones are just so passe!
😆😆 At the rate my channel is growing i should have put "Long service acheivment" at the bottom 😆. Or " I had hair when I started this channel" award 😆😆. Thanks for being one of the original 6469 James 😆, and thanks again for watching 😁👍
Hi Frank , How are you ? can you help me, I have a sculpfun s9 . My job is Vinyl sticker cutting . not a reflective .only vinyl sticker. can you tell me how much setting for this speed and power in Lightburn ?
nice one young man
😁 Thanks as always for watching Jim 😁👍
Hi Frank I see you used air assist when lasering , was there many fumes coming off the vinyl or did you use pvc free vinyl
@sailingstardreamer 🤔 I didn't use the pic free vinyl. But the fumes weren't too bad, but I do use some decent extraction in the workshop, so this wasn't really an issue. But it would have been much better if I had a good enclosure. Thanks for watching 😁 👍
Hi Frank, Good demonstration and it's come out well, so it's a little wonky it will probably be the slate if it's Welsh slate, from Blaenau Ffestiniog. As always a great video mate, Take care
😆😆 Thanks Shaun, 😆😆 I think its some cheap slate (it has a failed CNC carving on the back side 😆. If it was Welsh slate I'm sure it would have been worth taking a bit more care 😁. Thanks as always for watching mate 😁👍
Why you didn't laser cut vinyl on the board? Did you try that?
@@kova_zg Hi Tomislav, the video was more to show the process of cutting and transferring the vinyl. So people could use this method to make designs for any surface. Thanks for watching 😁👍
Do not under any circumpstance cut Vynil with a laser. Fumes are very very bad for your health and your hardware....
Frank really liked your show but now with the laser stuff it’s all a bit zzzzzz so sorry buddy but it’s just so hmmm
😁 Sorry Stephen. I do try to mix it up a bit where I can. But at the moment I have a lot of laser projects on the go for a couple of weddings we have coming up. I can only video whatever projects I have on the go. I'm sure it would be different if I were being paid to make these videos but at the moment it costs me money every time I post a video ☹. If there is anything in particular you would like to see just let me know and I'll try to fit it in where I can. Thanks very much for watching Stephen. I'm sure ill soon find a new favorite subject 😁👍