Issue was throttle body adaption after disconnecting of battery in a 1999 VW Passat wagon. Today is Oct 2, 2020 I ordered the Hex-V2 a week ago, it arrived in the mail this afternoon. I downloaded software and connected everything and followed the steps in this video. It recognized the fault in the throttle body and took me through step by step to readapt. Was back up and running in about 5 min! Then took some time to go through and clear other codes. Thanks Ross- Tech!
@@ughblenders I believe I bought the $199 Hex-V2 version that lets you work on up to three vin car numbers. By the way, the older cars it doesn’t register a vin in the system, so you get more wiggle room depending on the number of cars your working on. As I said in my post, i downloaded the software, hooked it up and had the throttle body issue cleared up in just a few minutes. Hope it works for you!
@@juneaufabrellos bought mine off of Amazon so when I reached out for my activation code they told me it wasn't through a verified seller. Guess I'll pay the $99 for the software bypass! Thanks, appreciate it 🤝
Srry how do I get this system does it come with the cable to hook up to car or can I buy the whole computer and everything somewhere I know it'll be helpful for other cars as well
Then you wait more than 30 seconds. :) I'm not really sure why the 30 second rule is there in the first place. From our point of view (VCDS), nothing happens between the ECM and VCDS after the ADP OK message comes up. The EPROM does need to save new values from the Throttle Body, but I would think that takes 30 seconds to happen, as in milliseconds. But the 30 second rule comes from VW / Audi, so I'm sure there is some reason for it.
my 1.8t aeb 1998 drive by cable runs the group 98 adapt over and over again, it wont stop. looks like in the video but after like 8 seconds it starts again... no codes. only a climbing idle speed from 900-1250rpm, hot and cold. this is after cleaning and ecu was unplugged. Thanks!
Great video. Did this the other week but I forgot to check the battery voltage, the TBA solved my problems for 2 days but the problem came back. I forgot to check the battery Voltage, what happens if the voltage is not over the limit 11,5-11,9 V?
Please help me. I'm Japanese. 2010 Model VW New Beetle ABA-9CBFS Group 98 does not show up at 1:27 "ADP,OK" does not appear on the right side of the screen even after "060". Top left Lebel file is displayed as "none"
Did you have the battery disconnected? If so, then doing the TBA can resolve that issue. The high pitch noise... throttle bodies are known to do this, it can be considered normal in most cases.
You all prolly dont care but does any of you know of a trick to log back into an Instagram account? I was stupid forgot my account password. I love any tricks you can offer me
@Waylon Bruno Thanks so much for your reply. I got to the site on google and im trying it out now. Looks like it's gonna take a while so I will get back to you later with my results.
I was trying to calibrate my throttle body in my audi a4b7 (8E) 2005 but i don't have any of these options. Protocol says CAN, there's no channel 098 or 060 and in the drop menu there's only EGR, boost pressure and Fuel pump. Can i get a bit of help?
The shareware version doesn't support Basic Settings. But when you purchase the full version, then yes, it is possible to do a Throttle Body Alignment.
what is the full version? i sepnt $270 on a VCDS scanner mainly to do a TBA and i have the downloaded file from the 20.12.0 release how do i know if i have the full version or not?
Good morning, I installed the new EGR valve and the new throttle body, do I need to alignment them? I reset the error and it didn't reappear, the machine seems fine. Golf 5 2004 2.0 tdi 16v 103kw Bkd.
I'm trying to perform the thottle body adaptation on my Brazilian VW UP TSI using the new VCDS version V22.3.1 for win11 but I can't find the option anywere! Maybe they removed this option from this version or changed the option to another place?
We are not removing things from the software. But different vehicles can have different variations of how to do a given task. We offer free vehicle support on our web forum for our registered customers, post there for further support. forums.ross-tech.com
@dreadwings3 I found the opinion to perform the throttle body alignment on the newest vcds version, which is on a very different location. Will need to re- learn how to use vcds because they changed things place. Regarding if I could manage to perform throttle body alignment, the answer is I am not sure because at old version v12, we can listen to the throttle body working (the characteristic noise) with the newest version the throttle body simple do nothing. The characteristic noise is not present. Therefore, I am not sure if it's working properly or not.
po meu amigo voce realmente tentou aplicar um video de 12 anos atras num up? kkkkkkk ta troll ne, vim aqui pra fazer no meu passat b5, fosse carro novo e eu visse a data do video nem tentaria
Hi. I have a Seat ibiza 1.4 TSi 6j cupra, BocaNegrA version with 180hp. Original. I m doing the replacement of that throttle. But I also have to replace the other one behind . Exactly behind of that black plastic throttle, theres another metal throttle. So How can I differentiate the alignment from the plastic throttle to the metal throttle with VCDS and vagcom??
Mine had a bad engine temperature sensor. Basically the car thought it was extremely cold but it was in the summer time. I'm not sure if that was the causing the error though. Did get the car running again, at least for a few months. It did the same thing again and no matter what we did, we never did get it started again.
@@tazgamerplays seems like there are different kind of throttle bodies, check vcds website and they say how to adjust each one of the three kinds. There’s a video from their official channel, probably you need to run a full on-off time to get it to adjust
@@azzz8083 We ended up just junking the car. We started having other issues. The back driver side door had a short somewhere, the front passenger window mechanism broke, an exhaust leak started after getting it running. We didn't want to put the money into it.
I was under the impression you can do this without VCDS, supposedly you turn the key on hold the gas pedal to the floor for 5 seconds, then switch the key off then release the gas pedal the alignment takes place by itself over the next few seconds with the key off...
I have a 2019 VW GTI SE and I changed my battery. The cruise control didn't work right away, didn't think about it on a stick shift. I parked, turned it off, turned it on but not start, waited for 5 minutes, turned it off, started the car and suddenly I had my cruise control back. I have no idea why, just sharing my experience with this model VW.
Hello , Hello, I bought my VCDS from Rosstech France and I would like to know the procedure for aligning a new throttle body and at the same time, take the opportunity to clean the intake manifold, on my Vw Passat B6 variant 2.0 L TDI 170cv, can you help me please? Thanks a lot ! 👍🏽
can anyone direct me to an updated version of this procedure. with my hex net all I see is COMMON and no ADVANCED settings. I can't get into the throttle body. thanks
Sadly my 1,8T AGU kesps throwing a P1559 - 35 - 00 failure code. Basic settings arent possible to set up. The Adaption always stops. I already got a new Throttlebody, still the same error. Anyone has a clue.
i cant acces basic settings or measuring blocks everything is greyed out except for Fault Codes" I can check and reset Fault Codes but how do i acces Engine measuring Blocks?????
hello, I have a P1581 fault code on A8 2005 ASB motor (V6TDI). I´m lookingo to know de basic setting channel of the J338 (throtle body). Do you know the number of the channel? thak you guys!
Why does mine shows "adaptation value - error" in the last box, when I go to channel 060? 2000 Audi S8. Ignition on, engine isn't running. VCDS Lite 1.2 full.
sorry off topic. is there a way to get the original module coding from either the car or audi? can change myself after buying your unlimited vins hex v2.👍🇬🇧
My 98 beetle is stalling out after doing a valve cover basket install and i can hear it making that high pitch noise. Should i be looking into doing this?
@@johnsantos6948 i have replaced the egr with a new one and i received after 4000km insificient flow from egr. Is it already faulty? Should i replace it again?
@@johnsantos6948 when I replaced the egr, i also replaced the throttle body. They were both new. But egr keeps giving error p0401 egr a flow insufficient detected
Hello,, After replacement of the fuel level sensor in my touareg 2011 / 7P . If the fuel lamp still on and the meter reading still zero .what can i expect . Thank you.
Hello. I can´t do the Throttle Body Alignment. The car is a Golf V 1.4 FSI 2004 and appear "Error" on Group 60 in Basics settings. I already change the throttle body, ecu and check the wiring. I think that the problem is the lambda sensor. The dtc is "Adaptation not started". Please help. Thanks (sorry my english)
hi sorry about this. but i do have a BMN engine code audi A3 170BHP tdi and it does have a throttle body. what did you mean ''diesel don't have throttle body''?
Szalasi Zsolt Depends. Our wired interfaces can be used with the Windows 8 tablets. You can find them for under $100 for the 7" and 8" versions. They often have a micro-USB port, so an adapter would be needed. Our HEX-NET wifi interface comes with VCDS-Mobile. VCDS-Mobile works with Android and Apple devices. Search our Ross-Tech.com website for "HEX NET" to learn more.
The thing is I already have an interface (Hex-Can 12.12 with usb connection cable) and I wanted to know if it could be used with the Android tablets, but I realized that it's not worth complicating things, I'm gona buy a notebook and that should do it. Thanks for the info anyway! P.S. I tested my car the other day, wanted to know if I have any error codes , and after the full scan I started the engine and wanted to see the real time functions (measuring blocks) and surprise .. any number I picked in the measurings groups it wrote N/A and some error ... I don't recall anymore what it was. What could do that kind of errors?
Hello i buy vcds 17,1 limited version cannot update, my problem is when i use measures blocks if i use more then one, i mean 001 and 002 its jump between and do not available 1 sec available another time not / yes what is the problem can be?
Hi, I had my door electrics messed with on vcds. now my window switches work opposite to what they should also the wing mirror swich is opposite. any idea how I can sort this? I have vcds so can access the systems. many thanks
You probably have the coding for LHD vehicles, you'll likely need to either change through the hidden menu or by changing through vcds, although be careful not to incorrectly code as you can cause permanent damage to expensive modules.
I have a vagcom cable, I got a engine fault for intake manifold sensor flap fault, I had the flaps sensor changed and I still get the same fault for sensor position flap, I ha r a tdi diesel mk5 jetta and was told that a diesel has no throttle body my engine is cjaa so I tried to adjuat the flaps in vagcom I get a error any suggestions thanks
At the 4:00 mark in the video it is stated that that diesels do not have a throttle body, so the details in this video would not apply. If you need further assistance, contact Ross Tech by email, you will find our email address when you click on the [About] button from the first screen of VCDS. Regards.
So now that I know my 2006 TDI has no Throttle-body, how do I use my RTech software to get my car out of Anti-theft mode? I changed the ignition components except Key housing/ chip reader. Car starts the shuts off ?
Crank and head is Right, transmission saved in pouring down rain fluid right, not diesel found it gas, got the job of read that's. Han nes bag box and battery goes out about as expected. Dec 25 2022
I am sick of these measurement blocks.the newer vcds doesn't have the measuring block option. its grayed out. and all these videos are using measuring blocks
+jensen chase its not surprising considering these things aitn cheap, so they have to make their money back (obviously they are also using up their time to press buttons but also go further into doing some physical diagnostics afterwards
@@Mathewmartialart my dealership was going to charge me $500 to test a good throttle body then even more just to have it replaced and labor on top of that, I decided to do it and it only cost me $60 and 3 afternoons also one of the damned hex bolts holding the throttle body on was torqued down way too much and stripped out, then I had to take out the intake manifold luckily I have a mechanic who allows me to use his shop and tools to fix my cars, although I would consider my Audi more of a nightmare than a car XD
Issue was throttle body adaption after disconnecting of battery in a 1999 VW Passat wagon. Today is Oct 2, 2020 I ordered the Hex-V2 a week ago, it arrived in the mail this afternoon. I downloaded software and connected everything and followed the steps in this video. It recognized the fault in the throttle body and took me through step by step to readapt. Was back up and running in about 5 min! Then took some time to go through and clear other codes. Thanks Ross- Tech!
having this issue with exactly that car. did you have to buy the $99 registered software key or were you able to do it without?
@@ughblenders I believe I bought the $199 Hex-V2 version that lets you work on up to three vin car numbers. By the way, the older cars it doesn’t register a vin in the system, so you get more wiggle room depending on the number of cars your working on. As I said in my post, i downloaded the software, hooked it up and had the throttle body issue cleared up in just a few minutes. Hope it works for you!
@@ughblenders I called them to order and the tech that took my call was very helpful
@@juneaufabrellos bought mine off of Amazon so when I reached out for my activation code they told me it wasn't through a verified seller. Guess I'll pay the $99 for the software bypass! Thanks, appreciate it 🤝
Srry how do I get this system does it come with the cable to hook up to car or can I buy the whole computer and everything somewhere I know it'll be helpful for other cars as well
Then you wait more than 30 seconds. :) I'm not really sure why the 30 second rule is there in the first place. From our point of view (VCDS), nothing happens between the ECM and VCDS after the ADP OK message comes up. The EPROM does need to save new values from the Throttle Body, but I would think that takes 30 seconds to happen, as in milliseconds. But the 30 second rule comes from VW / Audi, so I'm sure there is some reason for it.
my 1.8t aeb 1998 drive by cable runs the group 98 adapt over and over again, it wont stop. looks like in the video but after like 8 seconds it starts again... no codes. only a climbing idle speed from 900-1250rpm, hot and cold. this is after cleaning and ecu was unplugged. Thanks!
Great video. Did this the other week but I forgot to check the battery voltage, the TBA solved my problems for 2 days but the problem came back. I forgot to check the battery Voltage, what happens if the voltage is not over the limit 11,5-11,9 V?
Please help me. I'm Japanese.
2010 Model VW New Beetle ABA-9CBFS
Group 98 does not show up at 1:27
"ADP,OK" does not appear on the right side of the screen even after "060".
Top left Lebel file is displayed as "none"
Great video thanx RossTechVCDS , my golf mk4 alive again.
Am I the only one who noticed 4:00 ??
lol, what the hell
woah!! thats a meme over there. lol
+Mohammad Afifi yeah, a trollface xD
noticed what ?
@@haidumartocianliviualin4631 "thorttle body"
Did you have the battery disconnected? If so, then doing the TBA can resolve that issue. The high pitch noise... throttle bodies are known to do this, it can be considered normal in most cases.
You all prolly dont care but does any of you know of a trick to log back into an Instagram account?
I was stupid forgot my account password. I love any tricks you can offer me
@Waylon Bruno Thanks so much for your reply. I got to the site on google and im trying it out now.
Looks like it's gonna take a while so I will get back to you later with my results.
@Waylon Bruno it worked and I actually got access to my account again. Im so happy!
Thanks so much, you really help me out :D
@Ahmir Nolan Glad I could help :)
Waiting 30 seconds after basic setting has finished, is this a must, as I've always just stopped 😳 and ended
I was trying to calibrate my throttle body in my audi a4b7 (8E) 2005 but i don't have any of these options. Protocol says CAN, there's no channel 098 or 060 and in the drop menu there's only EGR, boost pressure and Fuel pump. Can i get a bit of help?
Diesel engines don't have a TB
Awesome fixed my startup issues in cold weather
hello, in my module do not use this option in the basic settlings menu. My model is UDS
I want to do adaptation in vw golf 6 cayc, after pressing it appears stopped, how to do throttle adaptation?
The shareware version doesn't support Basic Settings. But when you purchase the full version, then yes, it is possible to do a Throttle Body Alignment.
what is the full version? i sepnt $270 on a VCDS scanner mainly to do a TBA and i have the downloaded file from the 20.12.0 release how do i know if i have the full version or not?
@@MrJT1369 If you purchased from our web site or one of our distributors, then you have the full version.
Good morning, I installed the new EGR valve and the new throttle body, do I need to alignment them? I reset the error and it didn't reappear, the machine seems fine.
Golf 5
2004 2.0 tdi 16v 103kw Bkd.
I'm trying to perform the thottle body adaptation on my Brazilian VW UP TSI using the new VCDS version V22.3.1 for win11 but I can't find the option anywere! Maybe they removed this option from this version or changed the option to another place?
We are not removing things from the software. But different vehicles can have different variations of how to do a given task. We offer free vehicle support on our web forum for our registered customers, post there for further support. forums.ross-tech.com
@dreadwings3 I found the opinion to perform the throttle body alignment on the newest vcds version, which is on a very different location. Will need to re- learn how to use vcds because they changed things place. Regarding if I could manage to perform throttle body alignment, the answer is I am not sure because at old version v12, we can listen to the throttle body working (the characteristic noise) with the newest version the throttle body simple do nothing. The characteristic noise is not present. Therefore, I am not sure if it's working properly or not.
po meu amigo voce realmente tentou aplicar um video de 12 anos atras num up? kkkkkkk ta troll ne, vim aqui pra fazer no meu passat b5, fosse carro novo e eu visse a data do video nem tentaria
Hi. I have a Seat ibiza 1.4 TSi 6j cupra, BocaNegrA version with 180hp. Original. I m doing the replacement of that throttle. But I also have to replace the other one behind . Exactly behind of that black plastic throttle, theres another metal throttle.
So How can I differentiate the alignment from the plastic throttle to the metal throttle with VCDS and vagcom??
On mine, instead of showing adp ok it says error. I have checked the relay by the computer and it seems fine also.
did you find a reason? I saw one today with the same issue
Mine had a bad engine temperature sensor. Basically the car thought it was extremely cold but it was in the summer time. I'm not sure if that was the causing the error though. Did get the car running again, at least for a few months. It did the same thing again and no matter what we did, we never did get it started again.
@@tazgamerplays seems like there are different kind of throttle bodies, check vcds website and they say how to adjust each one of the three kinds. There’s a video from their official channel, probably you need to run a full on-off time to get it to adjust
@@azzz8083 We ended up just junking the car. We started having other issues. The back driver side door had a short somewhere, the front passenger window mechanism broke, an exhaust leak started after getting it running. We didn't want to put the money into it.
ADP RUN does not appear on AEE,AFT how do i know if it's been complete?
I was under the impression you can do this without VCDS, supposedly you turn the key on hold the gas pedal to the floor for 5 seconds, then switch the key off then release the gas pedal the alignment takes place by itself over the next few seconds with the key off...
I also thought that, but my 1998 aba is still having idle bouncing/surging issues. So I’m hoping this will fix it
I have a 2019 VW GTI SE and I changed my battery. The cruise control didn't work right away, didn't think about it on a stick shift. I parked, turned it off, turned it on but not start, waited for 5 minutes, turned it off, started the car and suddenly I had my cruise control back. I have no idea why, just sharing my experience with this model VW.
Should an alignment of the EGR valve follow an alignment of the throttle body?
Hello , Hello, I bought my VCDS from Rosstech France and I would like to know the procedure for aligning a new throttle body and at the same time, take the opportunity to clean the intake manifold, on my Vw Passat B6 variant 2.0 L TDI 170cv, can you help me please? Thanks a lot ! 👍🏽
What's the reason for waiting 30 seconds before clicking the stop button?
Why and when should you do this alignment? If i take off my throttle body to clean it, do i have to do this? I got an Seat Ibiza
when throttle response is bad i believe. Like a delay for example.
What does the adaptation step counter mean? Sometimes my car has 6 or 8.
can anyone direct me to an updated version of this procedure. with my hex net all I see is COMMON and no ADVANCED settings. I can't get into the throttle body. thanks
Hi, could someone help me please.
In Result Throttle Valve ADP. I get [ 00 ]. I have tried all groeps 060, 098 & non usd.
Hola it's works in a A4 TDI 2.0 2008 B8 ? My car has this valve
how check oil pressure.please help me.
I can't find this setting in VCDS! my car engine is CAYC
CAYC.....
ua-cam.com/video/2zrmhDw_v7Y/v-deo.html
Sadly my 1,8T AGU kesps throwing a P1559 - 35 - 00 failure code. Basic settings arent possible to set up. The Adaption always stops. I already got a new Throttlebody, still the same error. Anyone has a clue.
We offer free tech support on our forum for our customers: forums.ross-tech.com
i cant acces basic settings or measuring blocks everything is greyed out except for Fault Codes"
I can check and reset Fault Codes but how do i acces Engine measuring Blocks?????
We offer free vehicle tech support for our customers on our forum. forums.ross-tech.com
Skoda Octavia 2011 wich one of the 3 types ?
hello, I have a P1581 fault code on A8 2005 ASB motor (V6TDI). I´m lookingo to know de basic setting channel of the J338 (throtle body). Do you know the number of the channel? thak you guys!
Why does mine shows "adaptation value - error" in the last box, when I go to channel 060? 2000 Audi S8. Ignition on, engine isn't running. VCDS Lite 1.2 full.
I'm having the same problem
sorry off topic. is there a way to get the original module coding from either the car or audi? can change myself after buying your unlimited vins hex v2.👍🇬🇧
My 98 beetle is stalling out after doing a valve cover basket install and i can hear it making that high pitch noise. Should i be looking into doing this?
Hi, do i need to do something similar to the EGR valve if i changed it? Thanks
@@johnsantos6948 i have replaced the egr with a new one and i received after 4000km insificient flow from egr. Is it already faulty? Should i replace it again?
@@johnsantos6948 when I replaced the egr, i also replaced the throttle body. They were both new. But egr keeps giving error p0401 egr a flow insufficient detected
@@johnsantos6948 i have an aftermarket one for egr, and original for TB
@@johnsantos6948 what do you mean "swap"? Replace it?
Would this cause P0300, and misfires on cylinders? I have disconnected the battery when rewiring coils clips..
Please contact our support team, you will find our email address when you click the [About] button in VCDS. Be sure to include a full Auto-Scan.
Hello,,
After replacement of the fuel level sensor in my touareg 2011 / 7P . If the fuel lamp still on and the meter reading still zero .what can i expect .
Thank you.
Check the connectors properly fixed..I had the same issue before..Opened again flange and removed the connector and refixed back..problem solved
Will this S/W work with an EBay ELM327 OBDII Please..? Also What is My 02 A3 1.8 20v SE - None UDS or UDS DBWire..?
HI. can you do this with VCDS-LITE?
No
1999 audi A4 1.8t
Vcds lite 1.2
I’m getting message
Too many communications errors to continue
How can i fix it ?
Hello. I can´t do the Throttle Body Alignment. The car is a Golf V 1.4 FSI 2004 and appear "Error" on Group 60 in Basics settings. I already change the throttle body, ecu and check the wiring. I think that the problem is the lambda sensor. The dtc is "Adaptation not started". Please help. Thanks (sorry my english)
hi sorry about this. but i do have a BMN engine code audi A3 170BHP tdi and it does have a throttle body. what did you mean ''diesel don't have throttle body''?
means diesel cars does not need any air. :D :D
Hey guys. Can someone tell me if I can use this program VCDS and the diagnose cable with a tablet? Thanks
Szalasi Zsolt Depends. Our wired interfaces can be used with the Windows 8 tablets. You can find them for under $100 for the 7" and 8" versions. They often have a micro-USB port, so an adapter would be needed.
Our HEX-NET wifi interface comes with VCDS-Mobile. VCDS-Mobile works with Android and Apple devices. Search our Ross-Tech.com website for "HEX NET" to learn more.
The thing is I already have an interface (Hex-Can 12.12 with usb connection cable) and I wanted to know if it could be used with the Android tablets, but I realized that it's not worth complicating things, I'm gona buy a notebook and that should do it. Thanks for the info anyway!
P.S. I tested my car the other day, wanted to know if I have any error codes , and after the full scan I started the engine and wanted to see the real time functions (measuring blocks) and surprise .. any number I picked in the measurings groups it wrote N/A and some error ... I don't recall anymore what it was. What could do that kind of errors?
+Szalasi Zsolt i have the lynx tablet and works fine on the wind 8.1 i do however have both authentic uk vcds and the rosstech software
When I do the reading, I'm getting 15.69 and 84.10 and then it goes to 12.94% and 87.84 when it read adp ok. Is this normal? I have a 07 a4 3.2
Thank you for this great video mark mangano dependable auto wartburg tennessee outstanding video
Is this fuction can perform from vcds lite?
Is there a way to adjust idle speed on a polo 1.4 bby with a 4mv ecu? Thanks
Error group 060 not available :(
Hello i buy vcds 17,1 limited version cannot update, my problem is when i use measures blocks if i use more then one, i mean 001 and 002 its jump between and do not available 1 sec available another time not / yes what is the problem can be?
email our support department: www.ross-tech.com/contact.php
Hi! I have the Drive By Wire version om my audi a3 1.6, but when i try this (060) the result throttle adj. It just say's "locked" do you know why?
i cant get rid of the error
had a melted starting coil that affected my ecm I had it changed, now my car won't rev above 1000rpm
funciona en un vw touareg 2008 TDI??
does it work in a vw touareg 2008 TDI???
I have an Audi tt 225 what kind of throttle does it have
Same here i have a 225 also
non uds ecm
how to select protocol ??
where can I get this software I have a 1999 Volkswagen Passat
store.ross-tech.com/shop/cat/VCDS.html
Hi, I had my door electrics messed with on vcds. now my window switches work opposite to what they should also the wing mirror swich is opposite. any idea how I can sort this? I have vcds so can access the systems. many thanks
You probably have the coding for LHD vehicles, you'll likely need to either change through the hidden menu or by changing through vcds, although be careful not to incorrectly code as you can cause permanent damage to expensive modules.
Can i do this with the free version?
No, the shareware version of VCDS-Lite does not allow for Basic Settings.
Thanks for the reply..
I might buy a license
I have VW Passat 2000model 1.8T.\
the engine will go off shortly after I start. and at a time it will not even start
what is the cause?
The immobilizer is cutting the engine off I guess? Have you changed the key and missed to program the new key?
what if you wait more than 30sec?
I have golf fsi 2004 it has raising problem
Does anybody know if it works with Golf GTI mk3?
I have a vagcom cable, I got a engine fault for intake manifold sensor flap fault, I had the flaps sensor changed and I still get the same fault for sensor position flap, I ha r a tdi diesel mk5 jetta and was told that a diesel has no throttle body my engine is cjaa so I tried to adjuat the flaps in vagcom I get a error any suggestions thanks
At the 4:00 mark in the video it is stated that that diesels do not have a throttle body, so the details in this video would not apply. If you need further assistance, contact Ross Tech by email, you will find our email address when you click on the [About] button from the first screen of VCDS. Regards.
does this work with fords too?
Is Ford made by Volkswagen? No.
for GOLF YEAR 97? WHAT CODE IS.
Hola, funciona para un Audi A4 2.0 TFSI 2007?
Simón lo acábo de hacer en mi Audi a4 2.0t Quattro 2010
So now that I know my 2006 TDI has no Throttle-body, how do I use my RTech software to get my car out of Anti-theft mode? I changed the ignition components except Key housing/ chip reader. Car starts the shuts off ?
What do you mean it has no throttle body? Of course it does
@@b5Bart Diesel engines don't have throttle bodies
Crank and head is Right, transmission saved in pouring down rain fluid right, not diesel found it gas, got the job of read that's. Han nes bag box and battery goes out about as expected. Dec 25 2022
4.0 dosnt work on audi a3 1.8t agu
very good information thanks!!!
Nice tips! Thanks..
I`m with the SIMOS computer and it can`t adapt itself...
will this work with my 2008 honda civic si?
No, definitely not! VCDS only works with cars from the Volkswagen Group.
you need Hondata flashpro
Someone try this on a 1.8t 20v AGU (motorcode) ??? Thanks people
I am sick of these measurement blocks.the newer vcds doesn't have the measuring block option. its grayed out. and all these videos are using measuring blocks
forums.ross-tech.com/showthread.php?1905-UDS-Vs-non-UDS
Thank you
S what I got finally cables. Drive by wire.
On the most diesel cars since ~2005 there is electric throttle...
4:03 "There is no "Thorttle Body" haha
Okay can we start with, HOW TO HOOK THE CAR UP lol
crap dont tell you that you have to pay about ninty pounds befor you can use it
Gracias
tank you, info :)
My mechanic was going to charge me $75 for this!
+jensen chase its not surprising considering these things aitn cheap, so they have to make their money back (obviously they are also using up their time to press buttons but also go further into doing some physical diagnostics afterwards
@@Mathewmartialart my dealership was going to charge me $500 to test a good throttle body then even more just to have it replaced and labor on top of that, I decided to do it and it only cost me $60 and 3 afternoons also one of the damned hex bolts holding the throttle body on was torqued down way too much and stripped out, then I had to take out the intake manifold luckily I have a mechanic who allows me to use his shop and tools to fix my cars, although I would consider my Audi more of a nightmare than a car XD
thats cheap. do you work for free?
Ihave passat 1.8 turbo 1998-12-20
Sí, el mexicano New Beetle es compatible. Contamos con un distribuidor en México, puede ser alcanzado en cesar.macias AT gmx.net
good info
who else saw the troll face?
Tag: foot blisters
ok this is weird 🤔
HAHHAAHAH Loved the troll image :D
helpful enought
👍
top !!
Hahaha, You are working on a diesel? WHUT? stay of VCDS please :P
Audi
it's valid for audi 2000 tdi 8e/b7 valve?