WE FIXED ALL THE DAMAGE!!!! ...But THE OIL is WAY WORSE Than We Thought... $38,500 McLaren (Part 8)
Вставка
- Опубліковано 27 вер 2024
- Someone send me a new engine please
VTOMAN FlashSpeed 1000:bit.ly/3TzfZas
Use Coupon Code: VTOTINJA(50$)
We have some good news and we have some bad news - The GOOD NEWS is that the damage is fixed! We are ready to fire this McLaren up!! The bad news is, the oil report came back with some grim forebodings of doom. Hoping it runs and drives like Copart claims....
#mclaren #650S #McLaren650S #supercar #rebuild #project #repair #theInja #OilReport #Vtoman
INSTAGRAM: / the.inja.official
Support the Project: www.theinja.com
TikTok: / theinja
@TheInja
Cant wait to fire this thing up next week. Really hoping it runs AND drives with no issues. Lets go 🔥
Nice cliffhanger. I hope you chased the old oil out with some cheap stuff first 🤞👽🔧🎬
Let's go. A good oil flush and change that oil again after a couple hundred miles will make all the difference.
You need to run it. And change the oil again
Man that's going to be awesome!!
Next week? Probably more like another 3 weeks 😂
Some people put diesel fuel in oil, crank motor over, then drain diesel fuel out to clear out sludge out of the motor.
i wouldn't try that with a McLaren lol
the better option is ATF. replace one quart with ATF
I used to put a quart of atf in just before I changed the oil to clean the engine a bit. I also would do the diesel with just enough oil to lube the engine at idle and run it 15 minutes to do a major engine flush then new filter and oil.
You are soo mean!
How could you leave us with such a cliffhanger at the end..😂😂
Gotcha good!!!!!
@@TheInja haha
@TheInja no longer watching due to how this video was ended.
Dudeeee..... 😅
@@TruckerZRoadGangFan because the video is over right?
I would have added cheap oil and amsol engine cleaner to first fill up then flush and redo
Yeah that's the plan. But I have to run the engine first in order to flush it.
@@TheInjayeh but that's the point in the cheap oil and flush, you run it on that first, then once clean, Then you put your good oil in.
1. MUST do another oil change after driving it maybe 100 miles but go ahead and add the additive before hand.
2. NEVER remove a transmission drain plug on any car before you loosen the fill plug first just in case anything happens with the fill plug at lease you still have some lube inside.
3. DAMN IT, I so wanted to hear it start lmao but no worries I’ll be back watching your next vid!
For sure!
I just came to the comments to suggest number 2. I would never drain a tranny or diff without making sure the fill plug came out first!
Great video I would be looking at replacing the oil again once it be started and warmed up
Bro I've seen most of your videos and by far this project is one of the best ones, honestly you inspire me brotha, "Build your Dream." Cheers, much success to you and everyone following along
Appreciate you. Thanks Luis 🙌🏽
Man, I wouldn't have taken the chance with the AC pipes. A.lot of extra work if they leak. Good luck with the rest of the build.
If you do have a problem with the ac pipe, just fit flexi pipe from the lower straight pipe that will have sealed to the fitting the upper pipe had come from. This would solve your problem from a fitting to close to a bend that distorts the pipe and proves difficult to get a sealed joint. Keep it on mate. You’ve nearly done the said impossible.
For the A/C lines, you need to put a dye in the line and check for leaks using UV light
My favorite UA-cam project at the moment. I'm going to be equally happy and sad when it is complete. Keep up the great work.
Hats off to you bro you're good that's on my list of one of the coolest cars on the planet in comparison that lambo did not make that list. That's a very special car and the work that you have done is amazing
It’s always a good idea to fill your engine to the correct amount, use the cheapest oil you can find to the right spec. Run up your car to get the right temp and a few revs of the engine, or if possible a short run out. Then re drain the oil. If it’s still in a bad state or heavily coloured then repeat the exercise. This won’t waste good oil and clear your engine out. Don’t use engine flush as this can do your engine harm.
For those of you that dont know already, the ending of this video is just his style of UA-cam video, always, ALWAYS, leaves the video with the cliffhanger, will it or wont it kinda thing, saw this ending coming a mile off! Get used to it folks!
Awesome progress bro. Nice to see someone repairing a car rather than just spending thousands on a load of new parts and chucking repairable parts out .
Agreed. A lot of the content on UA-cam now is just "buy a ton of OEM parts from the dealership and slap it on"
One of the best rebuild series I’ve watched. Definitely see you going far as a UA-camr, can’t wait for the next one👌🏻
Appreciate you 💯 means a lot. Looking forward to getting this thing finished!
Oh man, missed this post but here now. Like folks have said you're getting so close. You going to keep it and enjoy being able to have another cool car to play with 👍 It's been a fun trip watching you on your journey to where you are now.
Use nitrogen to pressurize system serves 2 purposes allowing a high pressure test a few hundred psi above operating pressures assures you of no leaks and the nitrogen acts as a drying agent removing non condensables from the system
If you think it’s good enough, then it’s not good enough. Keep at it until no move movement
Glad you worked out those A/C lines! Don't forget to change the o-rings!
Now that was some chucky oil!!!!! and you got pranked by liitle dude 🤣🤣🤣🤣🤣🤣 but in the end .... Inja gets the last laugh....AGAIN ....lmfaoooo
Haha! All of the above! 🙌🏽
That unknown coolant line is probably a windshield wiper fluid line
Nah I know where that one is.
Dude you better not make us wait so long to see this thing fire up. We will not be happy 😂
Coming this week 😏
You should change the oil again after running it for at least 2 days, to flush the system out
What a talent and what an inspiration you are, honestly, hats off to you 🙌🙌
Appreciate you 💯
Tell me about it Adam. He is, I'm not.
Always remove the fill plug on the diff/trans, just in case that you can't open it after you emptied it.
Ooo yeah good call
should’ve dad got some cheap oil, ran the car for like 10-15 minutes, drained it and maybe did that one more time or did the actual oil change then
Love this! The cliff hanger is awesome.
Best part of the video in my opinion 😏
You should allways loosen the fill plug first when changing gearbox or diff oil
*Aweome video ! Would perform 2-3 oil change quickly to clean that engine ... Cheers from France*
Dawgnabit!! you did it again with the cliff hanger. lol!!! shame on me this time.
the oil should have been drained when engine is up to temp and you have to remember the mclaren engine will have high tolerences in it so you would expect a little contamination as the car would have been beat on as long as the next oil changes there is less contamination then regular oil changes will help but glad to see you wrenchin on it again cheers from down under
Its almost done bro!! Im pumped 😎
Looking forward to dat first drive 😏
I have a lot more respect for you bro, I would have lost half way through all that pluming
Took a lot of focus, that's for sure. 💯
Gotta get one of those quick jacks, my guy!
Sad to say dude, if that engine is not hurt it will be a miracle. Horrible sludge, bearing material..and water does not bode well for it. Fingers crossed!
Agreed. 🫠
I was so anxious waiting for you video Inja, hope nothing bad with your motor I am just commenting before watching he video.
You should absolutely do another oil change after you fire it up.
No doubt!
Legendary episode!
I really like the rims that came with the car
$400 and they're all yours 😆
This is why all engines should have a dipstick even an idiot can check it atleast and see if its low or how bad it is
Gonna wanna run that oil through it and change it a few times to clean all that nasty sludge out of the system.
Yep for sure!
I am really hoping for you, but I ve never seen oil so bad come out of an engine that was ok. Fingers crossed this is the first
You should also use a cheaper oil since you’re just gonna basically flush it and change it right afterwards
Yeah, it's what I had at the time. I'm not too worried about it, just will be happy if it runs right. :) worth the extra $20 of oil if so!
Absolutely brilliant buddy,can’t wait to see the next video👍
Keep up with the uploads bro!
i can see you blowing up in the automotive scene in yt with your discipline
Appreciate you!
I'm pretty sure that extra AC line is just a drip drain to ground for condensation. Every car has one.
I'd consider once you get it running to change the oil again.
For sure
Your use of pliers and crescent wrenches to tighten nuts and bolts are cringe in a funny way but from one salvage car builder to another it's all love for ya brotha!!!
Love your videos and this series is killer Inja! Can't wait to see the finished car!
Ahh yess. A cliffhanger now i cant think of anything else than if it runs😂😂
I seriously question why I was put on earth when I watch your channel. You are so multi talented, and I am not, even just a little bit. Good onya chap. Inja is like a wart, he grows on you.
Youve got talent too, can be hard to realize sometimes
@@BillGriffin77 hard work beats talent!
@@BillGriffin77 Dead correct, hard to realise. I am 67 and never had a talent for anything to be fair. Nice positive words anyways, Cheers.
Igniting the journey ahead!
🔥🔥🔥🔥🔥🔥
I would change the oil again after it had a few some heat cycles.
That's the plan!
If i where you i scould change the oil after 5-10 miles and the BMW oil filter.
Every were in the engine you have that bad oil. Maby 1 liter total in diffrent aerea.
Canal in the block or crankshaft all the tubing IN the engine.
For sure.
In the words of my people. Wanker!. Such a cliffhanger. Great stuff so far.
Hahaha
It is low but not low enough to not have any wheel gap so I bought some kw springs for mine 💪🏾
Yeah, may need to lower it! Would look WAAAAY better.
Send me a photo of yours and the spring kit you bought for yours! injamotorcycles@gmail.com
@@TheInja sure can brother. The biggest selling point to me is that you can modify the height to your liking
You need to buy some engine flush Ams oil makes a good product you add it get the engine to operating temperature and then change the oil again spend the money on everything and do it. It will help get all that buildup and sludge out.
Then drive it 500 miles and change the oil again try to save the engine
Them compression fittings need to be tight. I used a vice to hold them when I tightened them.
Looking good
bro you need to run through those multiple oil changes back to back to flush it now. don't wait. buy another load of cheap oil and run through then put something decent in it.
Yeah for sure. Will be doing that when I'm back on the McLaren on Monday!
You really should not use those Screw on cramps for coolant pipe They are bot exactly round and do not flex. Use the expandable ones. Its so many on this car that you are bound to have a nightmare.
Time will tell...already together so 😅
See you next time
You really need to flush the engine first. Please please please don’t just change the oil and think that this will be ok. Even if the oil sample is from the bottom of the drained pan there should be no metallic contamination. Im keeping my fingers crossed for you but it looks like there is some damage due to water contamination in the oil which turned it to sludge! That gloop will definitely not have lubricated the big end bearings!😢
For sure. My plan is to fire it up on all the fresh fluids, make sure it runs and drives, take it for a small drive around the neighborhood, then another oil change.
You pressure test the coolant system but not the AC system ? You should always pressure the AC system with at least nitrogen or even just air to see if the lines are leaking. Refrigerant is too expensive to use as a leak test gas. Very surprised
FFFf yeaaaaaah, I use to watch you a couple years a go with the chinese electric motor bike. them for som reason I moved on to other channels. This McLaren build is so awesome I found your channel again!!!! keep it going!!!!
Let's gooooo 🔥 Welcome back!
You should carry one of them VTMOMAN in the Tesla frunk
Love leaving us on a cliffhanger
It's my favorite thing to do in the whole world :)
I want ot mention that you need to bleed the whole suspenion I saw many people do it
Yeah, still figuring out how.
@@TheInja The guy that I saw he went to the dealership it self
Yay. Hey Inja that's a nice shirt you got there.
i wonder how many months he had to wait for it to arrive...
@@patcaza6166😅😅😅
@@TheInja you think its funny ?
man, wow...
Did you flush the engin before addinf the fresh oil?.
on behalf of little dudes everywhere...get pranked
The cliffhanger 😭
🥲
You should flush the engine using cheap motoroil first and then change filter and Oil again
@@johnnykjaersgaard7978 that's the plan!
Cracking job mate I remember it
I was a plumber before my Motorcycle accident and I believe that will work
Great to hear 🙌🏽
You "mother flower!" 😆😂😂 You need to do a compression and leak test ASAP and cross your fingers. Flush that engine with cheap oil let it run then add some liquid molly engine flush, let it run a bit more ( I think they say 15 minutes on the bottle) and repeat again until It look amazing! Good job again young man!👍
Hahaha
Man you have got to start wearing knee pads or when you are my age you won’t be able to walk.
Harbor freight tools getting it done lol
Only way to keep this project on budget! 😆
Okay what is the blasphemy you did towards the end of the video when you switch the lambo wheels on to the McLaren and you took off those beautiful hre Wheels
That cars oil looked worse than any I ever witnessed that had been 20000 + milage no oil change. Could be that car has been driven much farther on old oil looks like it'd need a engine flush oil flush before putting oil in it for the long haul.
What the heck kinda ending was that????!!!!! You take us on the journey...then hang us out to dry😢
I got hung out to dry myself, looking forward to actually hearing it too
This was several weeks of work, couldn't get more done
@TheInja ya we get it ...your definitely going thru ALOT getting that car back on the road. Heck it shows your determination that were someone else gave up you kept going 👏 🙌. But honestly in your little evil mind (jk) you had to know ALL OF US WENT ( OOOHHHH. WHAAAAT????) heck i bet you coulda done a video on all of our reactions alone 😆 . But most importantly I AM SOOOOO GLAD YPU TOOK THOSE UGLY ASS WHEELS OFF 🛞 🤣 🤪 😜
@TheInja btw i would change the oil n filter again after a half an hour of run time regardless how it is. As long as it hits temp. And change it while its warm. That oil you took out was SCARY 😨 😳
Man that wasn't cool you should have started the car at least LOL
Dang it!
I thought I would finally ear it purr
Very soon!!
Bro you need an engine flush
Most definitely. Next video!
Is that leak from the clutch fluid ? I think the whole bottom is cover with oil.
There wasn't a leak that I could see? I've been adding and removing fluids a lot under there.
@@TheInja great 😊
Um sir I need to know who made that montage music(about 18 mins in)
42:59 nice 😎
😏
why don't you bring down the tray and the subframe one more time?
Haaaaaaaaaaaaaaaaaaaaaaaaaaaaa 💀
Hey what rims are on that car? Make and size please?
Rohana FX5 series 20"
EU Verdict Spells Bad News for Oil?
FutureAZA (formerly MyTeslaWeekend)
Afternoon mate
The cliffhanger 😮😮😮😮😮…
Me before the cliffhanger: 🙂
Me after the cliffhanger: 🙃
Just say the F-word already! You know you wanna say it 😂😂
On camera: 🙂
Off camera: 🤬😠😠
Oh if you can turn the engine over without starting it better
Good long one
Are you going to change the color of this car or is it staying like this ?
Planning to color match the new panels!
BOOOO! damn you and your cliffhangers! lol 🥲
Me knowing what you're about to experience: 💀
25;58 have a taste test 😂
Hahahaha
f...I thought my wifi stopped
Nah it's still 200mbps!
The end of the video is cruel. I want a UA-cam refund!