Glad to see someone else had the same results with the BCA .223 Wylde chambering. I recently bought the 18in in .223Wylde. It was same hole accurate and I was just function testing it because it felt a little tight in the BCG. I was suprised at the performance.
@TheDoorspook11c I have had no complaints with any of their 223 guns I have tested. I've taken everyone apart and they've all been torqued to spec. I just add Roxette to the gas block screws, and purple Loctite and handguard screws, and they are good to go.
They say they are more precise and accurate I can't say whether they are or they aren't, but this gun certainly shoots really well. Thanks for commenting as always brother I appreciate it
For that matter have you had any malfunctions with any of the Bear Creek Arsenal uppers that you have reviewed? Because you've done like seven of them by now.
I have not had a single malfunction in over a thousand rounds in any of the 223 uppers I have reviewed from them. The BC 9 10.5 in 9mm upper I review does not like hollow points but it runs flawlessly with full metal jacket
Have a 10.5 side charge full pic rail handguard, and a 16' both 556/223 have ran flawlessly but.. the 16 is over gassed, I've tried a heaver buffer and spring not much difference. So I'm just gonna leave it alone and shoot it 🤷 I have checked everything and loc tite all bolts screws etc ,all in spec . It's a cheap upper but they do work
All the ones I have tested have been overgassed but they've all been correctable with either an H2 or H3 buffer. BCA has a pretty good warranty if you have a barrel that's not correctable you should just send it back to them. They will replace it.
@@oneijack98Val has tested like six of these uppers and in every single video he says that you need to check the quality control hourself. He's not a shill, you're just a jerk. And on Christmas Eve no less.
If you like outstanding, highly accurate, high value AR uppers that just need some DIY TLC, please like and subscribe!
Glad to see someone else had the same results with the BCA .223 Wylde chambering. I recently bought the 18in in .223Wylde. It was same hole accurate and I was just function testing it because it felt a little tight in the BCG. I was suprised at the performance.
@TheDoorspook11c I have had no complaints with any of their 223 guns I have tested. I've taken everyone apart and they've all been torqued to spec. I just add Roxette to the gas block screws, and purple Loctite and handguard screws, and they are good to go.
Great review Val
Thanks man
That looks fantastic with the Jag Comp handguard on there.
I agree
Yeah it does
I don't blame you for re-using the deer hunting intro, it was that good. lol
Thanks man I appreciate that
👍
Awesome rifle!
Nice use of the Gael and music in general in this video Freedom.
Thanks brother
BCA is very good quality material. I have an 11.5 barrel from Val for my next folder build. Which will be used as a vehicle defense weapon.
Should serve you quite well my friend.
I'm a big fan of the Wylde chamber!
They say they are more precise and accurate I can't say whether they are or they aren't, but this gun certainly shoots really well.
Thanks for commenting as always brother I appreciate it
I like the stainless
Awesome
I mean for the money it would be darn near impossible to beat. Thanks for stopping by and posting have a great day
Any malfunctions with it in the rounds you fired off camera?
For that matter have you had any malfunctions with any of the Bear Creek Arsenal uppers that you have reviewed? Because you've done like seven of them by now.
I have not had a single malfunction in over a thousand rounds in any of the 223 uppers I have reviewed from them. The BC 9 10.5 in 9mm upper I review does not like hollow points but it runs flawlessly with full metal jacket
Thanks for that information
Awesome.
@@Valorius Thanks man.
Very nice I just wrapped up a video with one of my BCA Uppers. Have a great week
Hey thanks for stopping by and commenting man. Which one did you test?
Have a 10.5 side charge full pic rail handguard, and a 16' both 556/223 have ran flawlessly but.. the 16 is over gassed, I've tried a heaver buffer and spring not much difference. So I'm just gonna leave it alone and shoot it 🤷 I have checked everything and loc tite all bolts screws etc ,all in spec . It's a cheap upper but they do work
All the ones I have tested have been overgassed but they've all been correctable with either an H2 or H3 buffer. BCA has a pretty good warranty if you have a barrel that's not correctable you should just send it back to them. They will replace it.
You could try either an adjustable gas block or a Black River tactical tuned gas youtube. They will both definitely correct your problem.
Great review man.
I was confused, i thought you had a 416 rigby ar
Now THAT would REALLY be something! 😆
Nice review brother 👊
IYKYK: Caracal 816A2 is arguably the Worlds Best AR-15
It's technical specifications are good, but they're also pretty run of the mill. You do you though.
Friends don't let friends buy BCA. Even the worse PSA stuff is still better in the QC department.
You should probably watch the video before commenting
@Valorius nah you just shillin for them, but you do you. Owned their trash and leaned that lesson.
@oneijack98 willful ignorance is the worst kind of ignorance. You should probably watch the video.
@@oneijack98Val has tested like six of these uppers and in every single video he says that you need to check the quality control hourself. He's not a shill, you're just a jerk. And on Christmas Eve no less.