Install looks good bro. Nothing wrong with keeping things simple. I hate seeing amps not mounted, just slippin' and sliding around the trunk. You good, none of that here.
Appreciate it!! Keep a eye out. Just got a new box for this build. Be running 3 of those subs on a smart 3k with 50ah of lithium. 🤫🤫🤫 Haven't told anyone yet.
I would put 8" in a T-line design with a speaker resonance setting of 35 Hz, with a 1 to 1 port, the port length for 34-35 Hz is approximately 246 cm - 256 cm, the area of the tunnel is calculated based on the speaker diameter for 8" this is 300 cm², all body turns need to be rounded to increase the bass speed, if the turns are not rounded, the resonance frequency will go below the setting, which can damage the speaker, for your 10" port 600 cm², the port length is 262 cm 34 Hz or 215 cm for 40 Hz, the disadvantage of this sub is its large size, otherwise very cool sound with a shelf from 26-160 Hz
it is tuned to not over power any midrange. Everything is nice clean and loud. Honestly the microphone on the camera just can't do much justice compared to in person
Audiopipe better step it up on the two stacks though because if I upgrade from them I will never look at them again. I am thinking sundown or incriminator.
@@audiokonnections naw something is wrong with the ones that I have then. I went to the retailer that I bought them from today in ga and he gave me every excuse of why he couldn't replace them so screw him and audiopipe. Next time it's ds18 or sundown. Maybe even incriminator.
@@audiokonnections those are the ones that I have with the smooth cone. Pssh. Straight Bobby buschett speakers. I would advice anyone not to waste their money.
This was just a testing set up. if you go to my shorts page we did a full install on this vehicle. 3 bdc4 10s in a custom box taramps smart bass 3k all sky high 1/0 ofc ran through the car. I appreciate you tho for noticing the jank wire.
Why the external eq when your head unit should have a built in eq. My pioneer flat screen has 13 band eq built in, 26 bands if you tune it with the pioneer app. No need for external eq
@@Chromedome-ss6mg it was a set up just for testing was in and took out right after the video. There are actually updates on this build now if you check out the channel. We did 3 of those ten inch subs. All 0 Guage wire with lithium etc
For one ten that's not bad. I have two of the two stacks and they are alright but one is popping like kettle popcorn but when they both blow I'm going to ds18.
You know if a system is put together right even the cheapest of stuff can sound good and what I can tell is that the system has a decent sound quality so it's ok to me
Audiopipe better step it up on the two stacks though because if I upgrade from them I will never look at them again. I am thinking sundown or incriminator.
@@packoswuids9000 no the summos. I just found out today that a retailer near me carries the massive line now. My next car I am going with hippos. The summos throb hard.
Definitely a nice build and very impressed with just one 10" hitting 134 💪💪💪 i can just imagine what 4 of those would sound like
Very clean install, 134.7 aint bad for a 10! Audiopipe for the win!
Install looks good bro. Nothing wrong with keeping things simple. I hate seeing amps not mounted, just slippin' and sliding around the trunk. You good, none of that here.
Appreciate it!! Keep a eye out. Just got a new box for this build. Be running 3 of those subs on a smart 3k with 50ah of lithium. 🤫🤫🤫 Haven't told anyone yet.
I'd for sure go with a Big 3. Remind her that it improves current flow and reliability by relieveing electrical strain.
Not bad for one 10 ,get another one, you just might hit 145 keep pumping 😊
@@anthonystokes5232 actually have 3 10s now. Video on the page go check it out
Ya boy!!that 10 was twerkin! Love watching the Chanel grow buddy.. KEEP BANGIN!!
Thanks much luv greatly appreciated!!
That 10 be putting in *WORK*
I absolutely love those bd4s
for the price I have 4 12 myself and they absolutely tear it up
that's over kill lol i bet it hits hard
Nice I bet they slam!!
@@audiokonnections Hello Friends, the bobigne (motors) is in copper ?
I would put 8" in a T-line design with a speaker resonance setting of 35 Hz, with a 1 to 1 port, the port length for 34-35 Hz is approximately 246 cm - 256 cm, the area of the tunnel is calculated based on the speaker diameter for 8" this is 300 cm², all body turns need to be rounded to increase the bass speed, if the turns are not rounded, the resonance frequency will go below the setting, which can damage the speaker, for your 10" port 600 cm², the port length is 262 cm 34 Hz or 215 cm for 40 Hz, the disadvantage of this sub is its large size, otherwise very cool sound with a shelf from 26-160 Hz
Dudes a legend for playing $uicideboy$
Demo begins @5:00
Nice set up bro....
Dude man I love it!!!!!
This is fairly clean put together.
Thanks I appreciate it
Very nice setup
Thanks appreciate it!!
I dig it!
Its a good job bro congrats...👍
That's appreciate it
🔥
Thanks appreciate it lil brother!!
pretty good for a single 10"
Thanks appreciate it!!
man that’s a SOLID build but since you said be honest i hate the splatter paint on the box it’s tacky imo, all love tho man😂😂
Another one ☝️
Like the build bro!
It's cool😎
It's definitely a fun lil project. More to come on it soon
Nice build bro!!
Audiopipe amps are pretty good..just can't run them below 1 ohm..I mite try dat sub myself..looks good..keep on bassin'
Yea I wouldn't recommend going under 1 ohm. But they are some nice subs for the price. They also can handle quite a bit of power too
@@audiokonnections ok then..preciate dat...
Their speakers are crap but I will say that I had an apcle1800 audiopipe amp and it was a monster. Speakers though? Naw I will pass from here on out.
Put a Fan, move heat away.
I got 2 12 bdc4’s and they hit hard man👍
Dang that sub is MOOVVINNNN looks sick, just wondering tho does the sub overpower the mids and highs or is it properly tuned not to do that?
it is tuned to not over power any midrange. Everything is nice clean and loud. Honestly the microphone on the camera just can't do much justice compared to in person
@audiokonnections that's sick I'm guessing it's also not piercing loud where the highs hurt your ears too
exactly
130.5🤘
My Guess is 138.6 db at 46hz
Bro that shit is gettin it
Audiopipe better step it up on the two stacks though because if I upgrade from them I will never look at them again. I am thinking sundown or incriminator.
Audiopipe makes a nice double stack from there dealer line. They are the txx bdd2 I had 4 of the 12s and they did awesome!!
@@audiokonnections naw something is wrong with the ones that I have then. I went to the retailer that I bought them from today in ga and he gave me every excuse of why he couldn't replace them so screw him and audiopipe. Next time it's ds18 or sundown. Maybe even incriminator.
@@audiokonnections those are the ones that I have with the smooth cone. Pssh. Straight Bobby buschett speakers. I would advice anyone not to waste their money.
Audiopipe is what I'm rolling w too....thanks for sharing...new subscriber here
34hz good sir
I thought it was something like that lol
I'd say 135 at some high frequency like 40s htz
I'm gonna do a update video soon and try to hit a 135. I believe around 40hz should do it. Thanks for the input I greatly appreciate it!!
Point the port and sub towards the driver side corner
This was a test build. If u look on my reels videos we just built a new box for 3 of those subs on a smart bass 3k in that vehicle.
ground too thin needs to be thick like power wire
This was just a testing set up. if you go to my shorts page we did a full install on this vehicle. 3 bdc4 10s in a custom box taramps smart bass 3k all sky high 1/0 ofc ran through the car. I appreciate you tho for noticing the jank wire.
ua-cam.com/users/shortshWDkC6D2qMg?feature=share
130 at 40hz
Upgrade those positive and negative cables to 0 Gage
If you go through my shorts videos there is a complete final build of this. 3 bdc4 10s. This video was just doing some testing.
ua-cam.com/users/shortshWDkC6D2qMg?si=mcdweazCtcA-P4Xk
Hello Friends, the coil is in copper ?
Why the external eq when your head unit should have a built in eq. My pioneer flat screen has 13 band eq built in, 26 bands if you tune it with the pioneer app. No need for external eq
140 cmon 😄👉
136.4
Those ground wires are way way to small, wtf
@@Chromedome-ss6mg it was a set up just for testing was in and took out right after the video. There are actually updates on this build now if you check out the channel. We did 3 of those ten inch subs. All 0 Guage wire with lithium etc
Move the box
127
132
Bruhhhhhhh you talk too much 😂
Be nice Bruhhh💀
💯
😂
137.8 db
Give it a 4" round port 👍 just a suggestion 😉
For one ten that's not bad. I have two of the two stacks and they are alright but one is popping like kettle popcorn but when they both blow I'm going to ds18.
stop talking and just do the demo tour goes in a different vid
Where is your car?
You know if a system is put together right even the cheapest of stuff can sound good and what I can tell is that the system has a decent sound quality so it's ok to me
If you look on my shorts page we re did this whole system and did 3 of those 10s in a custom box on a smart bass 3k. Turned out pretty decent
@@audiokonnections I will have to check it out
Audiopipe better step it up on the two stacks though because if I upgrade from them I will never look at them again. I am thinking sundown or incriminator.
Look. At FI AUDIO
@@packoswuids9000 I just went with two massive audio 12s today.
@@areasonablethought610 the hippos?
IM going from 2 skar vxf 12'son 3k to 2 FI AUDIO MT SERIES 18'S on 8500Kw in my 8th gen civic coupe
@@packoswuids9000 no the summos. I just found out today that a retailer near me carries the massive line now. My next car I am going with hippos. The summos throb hard.
@@packoswuids9000 dayuum. 18s. Shiiiieet!