भाई, वीडियो बहुत अच्छा तो नहीं बनाए हो, ना ही अपर डिपर की जानकारी मिली है, लेकिन फिर भी कोशिश तुमने बहुत अच्छी की है मेरी कामना और शुभकामनाएं है कि भविष्य में तुम और अच्छे अच्छे वीडियो बनाओ । लाइक कर दिया हु ।
Thank you! This is for low beam only. High beam/dipper is separate and has a separate chamber and bulb in Honda City. I did not changed High beam bulb because it can cause difficulty for oncoming drivers to see. It is stock Yellow.
After watching your video. I ordered 50W H11 4200k HB3 for My Ertiga High beam. But after running 10 minutes the driver/ blasters of the bulb are getting very hot. I can not hold them more then 5 seconds. Is it happening with you. Is it normal? Please share your observations.
Why would you touch it when it was switched on for some time? Bulbs get hotter after usage. The element on the back will heat when the headlamp is in operation and is normal per OSRAM. I found it too after being used. Additionally, you may check your manual what is desired wattage of the bulb recommended for your vehicle or you may ask Maruti service center as well.
It depends on the vehicle. So, before purchasing, refer to the owner's manual for the exact connector type & wattage supported for your car. This is H11 - only for low beam.
भाई, वीडियो बहुत अच्छा तो नहीं बनाए हो, ना ही अपर डिपर की जानकारी मिली है, लेकिन फिर भी कोशिश तुमने बहुत अच्छी की है मेरी कामना और शुभकामनाएं है कि भविष्य में तुम और अच्छे अच्छे वीडियो बनाओ ।
लाइक कर दिया हु ।
Thank you! This is for low beam only. High beam/dipper is separate and has a separate chamber and bulb in Honda City. I did not changed High beam bulb because it can cause difficulty for oncoming drivers to see. It is stock Yellow.
After watching your video. I ordered 50W H11 4200k HB3 for My Ertiga High beam. But after running 10 minutes the driver/ blasters of the bulb are getting very hot. I can not hold them more then 5 seconds. Is it happening with you. Is it normal? Please share your observations.
Why would you touch it when it was switched on for some time? Bulbs get hotter after usage.
The element on the back will heat when the headlamp is in operation and is normal per OSRAM. I found it too after being used. Additionally, you may check your manual what is desired wattage of the bulb recommended for your vehicle or you may ask Maruti service center as well.
Better to avoid all this modification. Specially with something like lights of the car
Thanks
Which year model is ur city.. and we need to order h4 or h3 bulb?
It depends on the vehicle. So, before purchasing, refer to the owner's manual for the exact connector type & wattage supported for your car. This is H11 - only for low beam.