Це відео не доступне.
Перепрошуємо.
JVC Everio flat flex cable repair | RATTLECAN GUITAR RESTORATIONS by James O’Rear
Вставка
- Опубліковано 29 лис 2016
- Fighting the monster that consumes the project budget: equipment failure! My JVC Everio GZ- HM320BU camcorder a.k.a. the "uppy cam" is experiencing a failure of the side screen that involves internittamt video and the non-functioning of the buttons and laser touch selector. I'm lead to believe that it is the failure of a flat flex cable. I sourced a set of 2 cables on eBay for $13.98 (including postage from China) and they arrived 9 days later. Here is my attempt to repair my broken camcorder.
The tools I used were a size 000 screwdriver and a pair of long tweezers. I also used a pair of needle drivers and a pair of specialty ENT forceps but the repair can be done without them. Be sure to keep track of your screw locations, they are not all the same size.
The flex cables were found by Googling my model number and the term "flex cable". This is not a tutorial, this is not a how-to, this is me going through the motions and hoping it worked. Your results may vary, the onus is on you to decide if your skills can complete this repair. I take no responsibility for your actions, you have been warned.
-----------------------------------------------------------------------
Support Rattlecan Guitar Restorations by joining us on Patreon:
/ rattlecangtrrst
Subscribe to Rattlecan Guitar Restorations on UA-cam by clicking:
tinyurl.com/Rat...
Follow Rattlecan Guitar Restorations on Facebook by clicking:
/ rattlecanguitarrestora...
Follow Rattlecan Guitar Restorations on Instagram by clicking:
/ jslugman
Follow Rattlecan Guitar Restorations on Twitter:
/ rattlecangtrrst
Visit Rattlecan Guitar Restorations on the web:
www.jamesorear.com
--------------------------------------------------------------------------
Copyright © 2013-2016 James O’Rear
All rights reserved
Music:
Demilitarized Zone by Ethan Meixsell
Country Cue 1 by Audionautix is licensed under a Creative Commons Attribution license (creativecommon...)
Artist: audionautix.com/
Stars Time LapseStock Video in HD by Beachfront available at www.videezy.co... under a Creative Commons Attribution 3.0 Unported License.
Ive been an Electronic Engineer for 40 years. No way i'm going to do that except maybe to play. My eyes are shot after years of staring at drawings. My hats off to the designers that designed the mechanical end also to the assemblers in the factory.
It was an easy choice: $7 part or $300+ for a new camera. Glad my eyes and fat fingers cooperated. Cheers!
Dziękuję za Twój film! Naprawiłem flex w swoim Everio (GZ HM 335 BE) oglądając Twój film. Trudna robota ale poradziłem sobie. Stawiam piwo jak przyjedziesz kiedyś do Polski :)
I am happy you fixed it! We will drink next time I am in Poland!!!
dude that cardboard with double side tape idea is fucking aces. i usually set the screws down in sections in the same pattern i took them out. but sometimes i accidentally hit them. i'm def going to use your idea in the future. my screen on this fucking camera stopped working during charging the battery. this is one teardown im not looking forward to and not sure if itll even work but everyones videos point to this cable being the issue
Good luck with the repair!
I used to work full time in electronics, have a couple of college degrees in it, changing a ribbon cable is the easy part, getting to it and getting the thing back together is the challenge, they should have a college course on that lol
The tiny magnet within the two piece cover of the hinge, which snap apart, is somewhat of a challenge! It is tiny and round. It fits withing a hole of the black half, and not the chrome half.
Thanks for the clarification George!
I have the same issue and the flex cable ended up braking on my camera a few years ago and I was going to send it into a repair shop. But I ended up not doing so and decided to look up a repair shop here where I live. And I found a bunch of repair videos here on youtube. So I came across this video and now ill be ordering a new flex cable soon. And ill be getting a set of cables so if it ever happens again ill be prepared. My camera is a different model in the same brand but the video still helps.
Glad you found it of use. The cables are so cheap I bought a couple of them just in case. Good luck and let us know how it went.
worked out wonderful like bran new.
Muito bom. Mas, cortou alguns detalhes. Grato!
hI. Could you tell me if there is an adapter for this hd? My camera no longer works and I want to save the HD files.
Hello. I live in Vietnam. I also have a jvc camcorder GZ-E200BU. it broke the cable. and I don't know how to buy it. Please help me to address. thank you
I found the part on Amazon here in the USA, search for your model number and flat ribbon cable. Good luck!
@@RattlecanGuitarRestorations Thank you so much
My dog tried eating my camera and broke the ribbon. I can't find a replacement, though
My jvc camcorder had the same issue still looking for the flex cable
Hope you find the parts you need, prowl eBay. Sometimes it takes time to find them when someone posts in small batches.
Thank you
good for you James . ribbon cables are hard to seat .
Much easier when I can get my big fat sausage fingers in there.
even skinny one make it tough James. 20 yrs component level repair . its just so easy to get them off set just a touch . n throw off all of it . hey don't forget to pat your self on the back my man.
my recording buton is damage not working were i can found one flex buton???can send me some link???
Sorry, I don’t know right away where to find one. Perhaps a local electronics supply house could direct you to a source.
@@RattlecanGuitarRestorations here not exists this tgings i try from alliexpress only like your flex found .. for me i need the recording butun if you found some link send me thanks good video i was open one time for my self camera not found the point to buton i thing will be more dificult...
what do you call on that cable, i mean spec detail im trying to buy that material
I searched my make/model and the word flex cable to find the part number.
Thank you Sir for the reply i appreciate it :)
Great work on the camera! Absolutely beyond me and my interests. My hat is off to you!
Acronym issues:
Crap - Wikipedia
en.wikipedia.org/wiki/Crap
Acronyms. The acronym CRAP may refer to: Commandos de recherche et d' action en profondeur, the former name of France's Commando Parachute Group. Apparently the French didn't give a _ _ _ at first.
No entertaining legitimate acronyms for "shit," even in non-English tongues. I guess everyone, uh, (use scatological phrase of choice) about this one.
Onward and upward: cowboy guitar!
can you help me imy camcorder same you but it only problem please insert memorycard .then i open it then i touch in the menory catd holder then it ok but some time it problem then i take off the cover of memory card holder then camcorder power can not start no power i can not understand why happen you help soon i hope .i am vietnamese may be english no well.i want do myself i have not money to bring it repaire shop thank you very much...
Sounds like a loose connection inside maybe? Might be able to open it and look for something loose? Hard to tell without seeing it.
don't know how to fix so iam let pro do it fixing use electronics device is easy fix electronics not my strong suit straight up truth
Knowing your limits and strengths will get you far in life my friend. Best wishes.
Good job. Note to self: Don't try this at home ;-)
Thanks. I had nothing to lose at this point.