How to install a water butt

Поділитися
Вставка
  • Опубліковано 26 кві 2012
  • Watch our step-by-step video showing how to install a water butt, with expert advice and top tips to help you complete the job with confidence.
    Visit the official B&Q UA-cam channel. Here you'll find the ideas and know-how you need to make your home improvement dream a reality: / bandq
    Need a helping hand with your DIY project? We're always uploading new videos, so whatever your project, we're here to support you 24/7. Subscribe today so you don't miss out. ua-cam.com/users/subscription_c...
    For more advice go to www.diy.com/advice
    To shop at B&Q go to www.diy.com
    Join the B&Q Club for exclusive offers: www.diy.com/club
    Like us on Facebook: / bandq
    Follow us on Twitter: / bandq
    Be inspired on Pinterest: / bandq
    Find new ideas on Instagram: / bandq_uk
  • Навчання та стиль

КОМЕНТАРІ • 69

  • @moussifer
    @moussifer 3 роки тому +5

    what is the diameter of the hole drilled into the waterbutt using holesaw?

  • @MrBoltonlee
    @MrBoltonlee 4 роки тому +23

    Put a teaspoon full of cooking oil in the barrel when full it stops lava fly

    • @lpatterson5005
      @lpatterson5005 2 роки тому +2

      They won't get in if it's sealed will they??

    • @MrBoltonlee
      @MrBoltonlee 2 роки тому +2

      @@lpatterson5005 you are very clever I will get you a medal

    • @lpatterson5005
      @lpatterson5005 2 роки тому +2

      @@MrBoltonlee well how do they get in if its all sealed?

    • @MrBoltonlee
      @MrBoltonlee 2 роки тому +4

      @@lpatterson5005 if it's sealed they cannot get in most water bottles are not properly sealed so they gets in quite easily

    • @SaxJockey
      @SaxJockey 10 місяців тому +1

      ​@@MrBoltonleeVery true. The one shown here is the older Sankey butt, there are significant gaps in the lid where the handle is, and where the locating clips are. The newer ones by Ward have better fitting lid, but some bugs still find their way in. Thanks for the tip about the oil, didn't know that 👍.

  • @malcolmclark810
    @malcolmclark810 4 роки тому +14

    I don't understand why the connector pipe has to be a maximum of 500 mm between rain down pipe and water butt. Mine has to be 200 mm longer to go around a corner. Will it still work or is there a hydrodynamic issue??

    • @sheerpride
      @sheerpride 3 роки тому +8

      The only issue is that the connector pipe supplied is only 500mm long. I don’t think B&Q sell longer pipes. You can get longer pipes on eBay or from garden centres who sell pond supplies.

    • @Nick_R_
      @Nick_R_ Рік тому

      I guess we need to avoid any sag in the diverter pipe? Hence they suggest to use rigid overflow pipes as extenders?

  • @rainwaterterracewaterbutts4003
    @rainwaterterracewaterbutts4003 6 років тому +1

    The Rainwater Terrace water butt installs slightly differently to a standard water butt.

  • @GETTHEDEUCE
    @GETTHEDEUCE 10 років тому +15

    Manufactures should give you a choice of diverter kit , black, or white.

  • @user-pt9oy7ox5x
    @user-pt9oy7ox5x Рік тому

    Hi. What is the size of the 'hole saw bit'? I can see that the question has been asked before but can't see a reply stating the size of the hole saw bit. Thanks in advance 👍🏻🙂

    • @bandq
      @bandq  Рік тому +1

      Hi, we would suggest checking the packaging as the instructions may vary 😊

  • @deeprose115
    @deeprose115 5 років тому

    What drill did he use?

  • @simonjorme
    @simonjorme 4 роки тому +6

    What if the downpipe is cast can you get attachment for that

    • @m.o.2085
      @m.o.2085 4 роки тому +2

      Can't be used in cast iron downpipes.

  • @markswjg
    @markswjg 5 років тому +3

    What drill bit did he use?

    • @stever6542
      @stever6542 5 років тому

      Hole cutting boring bits for plastic,wood or metal.
      Screwfix.....B&Q
      Great bit of kit

    • @petertr2000
      @petertr2000 4 роки тому +5

      @@bandq I think he meant what size lol

  • @deeptiprasad3419
    @deeptiprasad3419 Рік тому +2

    Can the diverter be switched back to drain pipe mode with a valve, if the water butt starts overflowing?

    • @willwazere2
      @willwazere2 Рік тому +7

      You don't need to divert the flow manually.Once the barrel is full the water, it overflows inside the diverter and runs on down the lower section of the down pipe and to the drain 👍

    • @bandq
      @bandq  Рік тому +5

      If the waterbutt is full, the diverter kit makes sure the water goes to the drain so the waterbutt will never over flow 😊

  • @Canyouseeanypartofme
    @Canyouseeanypartofme 2 роки тому

    How can I make sure there are no impurities

    • @bandq
      @bandq  2 роки тому

      Hi, Lizzy😊! We sell waterbutt treatment which is a great way to prevent any issues. It prevents any bad odours and keeps the water free from slime and algae. Product 5010646046633 can be viewed on our website. Hope this helps!

  • @Eddie-je8qp
    @Eddie-je8qp 4 роки тому +5

    what do you do if it rains a lot and gutters are blocked with to much water as the butt is full?

    • @johnfaulkner6776
      @johnfaulkner6776 4 роки тому +13

      When the barrel is full the diverter diverts the water back down the down pipe to the bottom drain.

    • @Nick_R_
      @Nick_R_ Рік тому

      If the gutter downpipe is overflowing at the top then you may have a blocked drain or soakaway.

  • @zaypeaceIslamstories
    @zaypeaceIslamstories 3 роки тому

    So how much is it? Full set ?

    • @madskillz808
      @madskillz808 2 місяці тому

      They seem to range from 30 to 50 quid

  • @David-st8te
    @David-st8te 4 роки тому +2

    Mmm...divert the rain water into the tank. How the water get into the tank with the connected hose if you don’t install a diverting unit where you turn the knob to divert the water tank or let it run through when the tank his full. This set up the rain just run through to the drain. 😳

    • @johnfaulkner6776
      @johnfaulkner6776 4 роки тому +31

      You don't need to divert the flow manually. Surface tension means the rainwater doesn't fall straight down the down pipe- it flows down the inner walls of the pipe. It then flows outwards along the pipe to the barrel .Once the barrel is full the water " over flows" the inside "saucer" in the diverter and runs on down the lower section of the down pipe and to the drain or soak away. It's very clever and has no taps or switches. Just water filling then backing up, then overflowing back into the original downpipe.

  • @victoriaward542
    @victoriaward542 7 років тому +21

    Use the spirit level from the centre, or top, or base of the drilled hole?! Rubbish

    • @Polygor2
      @Polygor2 3 роки тому +1

      Base of the hole.

  • @pixelpanther9325
    @pixelpanther9325 5 років тому +2

    what happens when but full and spews water everywhere B&Q, you need a run off or overflow where is that in your fitting instructions?

    • @TWalsh2
      @TWalsh2 5 років тому +21

      The rain diverter is hollow and continues down the original drainpipe. They should have shown this.
      When it rains the water sticks to the side of the drainpipe due to waters surface tension and it is this water that is colected in the water butt.
      When the water butt is full, and the water backs up the hose pipe, it "overflows" into the original drainpipe.

    • @russellg3775
      @russellg3775 4 роки тому +4

      @@TWalsh2 boom, that shut the smartarse up!

  • @zaypeaceIslamstories
    @zaypeaceIslamstories 3 роки тому +2

    My pipe.is round no square so it it a universal type one for round and one for square just asking

  • @anhvunguyen3995
    @anhvunguyen3995 6 років тому +3

    Water butt.......

  • @lpatterson5005
    @lpatterson5005 2 роки тому

    Could you use this as an emergency drinking water supply?

    • @MrBoltonlee
      @MrBoltonlee 2 роки тому +3

      I'm always drinking the rainwater I live in the countryside I filter the water before I drink it

    • @bandq
      @bandq  2 роки тому +13

      Whilst water captured in a water butt is perfect for watering your garden, it cannot be guaranteed as safe to drink.
      This is due to:
      The water butt is not sterile and will be potentially harbour insects and vegetable matter (eg leaves).
      The water will probably arrive via a roof, this may be dirty or have bird waste contaminant.
      Water can become stagnant, especially if unused for a period such as during hot weather.
      We hope this helps 😊

    • @lpatterson5005
      @lpatterson5005 2 роки тому +2

      @@bandq yes thank you

  • @janandfranck2826
    @janandfranck2826 4 роки тому +16

    Useless video. No measurements, or where to gut downpipe in relation to waterbutt hole etc,

  • @doit4thefun803
    @doit4thefun803 4 роки тому +1

    Who’s watching during lockdown

  • @1justpara
    @1justpara 4 роки тому +11

    I have ROUND gutters.

  • @petermumford8088
    @petermumford8088 4 роки тому +22

    I mean, the video works, but really B&Q: having the man do all the work while the woman just looks on and assists? How about switching that round?

  • @sennapode
    @sennapode 4 роки тому +78

    A masterclass in mansplaining. The woman had nothing to do, except say 'yes' and take the lid off

    • @grill6411
      @grill6411 3 роки тому +21

      if only women were content to do nothing and say 'yes' in all aspects of life

    • @littledistractions
      @littledistractions 3 роки тому +27

      grill wow and yet here I am slaving away on DIY on my house while my man is confused how to use a drill

    • @floatingpeaks4584
      @floatingpeaks4584 3 роки тому

      🤣🤣🤣

    • @RudyWarman
      @RudyWarman 3 роки тому +6

      She did add that it's practical to use more than one butt

    • @painterman235
      @painterman235 3 роки тому +13

      She also passed him the drill ..