How to Launch a Motorcycle Well? Explained.
Вставка
- Опубліковано 31 тра 2018
- Thanks for watching.
I own a few motorcycles like the KTM Duke 390, KTM RC 390, Suzuki GSXR 1000, Suzuki GSX 1100F and Yamaha R1. I love DIY on my motorcycles. My Facebook Page: www.Facebook.com/Vikas.Rachamalla
Iammotorbiker . My Instagram ID: RVKVIKAS - Авто та транспорт
Great job.
You teach better than my college lecturers.😁
Hehe malayalii
Malayali
FanS ZonE Malayali Daa😂
FanS ZonE hehe awesome profile dude. 😂
ഇതൊക്കെ എന്ത്!...😀
One more thing Vikas, lean forward while launching. This will minimise popping of front wheel. And you can give a bit extra throttle.
Very nice explanation.
You can tell he is a good speaker as the whole explanation didn't take cuts.
He just kept speaking and speaking which is nice.
Thanks for the tips!
everytime a worthy knowledge comes from you..... great job !
I learned so much from watching your videos that I wouldn't have otherwise in real life as people around me are just too rowdy to go into details of motorcycling.
Dhanyavaad Vikas ji!!!
I really understood the touché. I have a r125 and I realised my maximum is 8k rpm not 9. Thanks a lot for explaining it very clearly.
Great work sir,, thank you for giving this valuable knowledge...
Hi,
I'm an bike enthusiast and I'm residing at Bangalore.I Hope you have noticed in metro cities that the bikes are parked mostly on streets which is not so safe.
May be due to space constraints and more other factors people are forced park bikes outside their premises. May be this could be the reason people are not ready to buy premium bikes even if they could afford one. It would be good if you do a video on "how to protect our bike from theft" or "Better ways to park in metro"
Even if people are aware about this, you vlog may give confident to people to buy a bike and sleep peacefully.
Please do the needful !!
Regards
Vj.b
RIP CLUTCH PLATES
A & A GARAGE
Lol smartass
True but this is for people who race on track
Priyesh Kumar yes broo
Clutch plates are cheap, let's say ₹4000 for a pair after 20k kms if ridden hard.
Nobody Angel 4000rs will be cheap for you not for everyone
Vikas brother can you make a video on rev matching ..... that is it good to rev match while down shifting ..
And is it safe on small cc bike like 150 cc bikes .
ua-cam.com/video/V403IkU93Os/v-deo.html WATCH THIS!
For revv matching, you need to know how your motorcycle behaves at different rpm's and different gears. So, just practice. Blip the throttle while downshifting, and you'll soon get a hang of it. Ride Safe!
very well explained...i dint know there would be so much behind launching a motorcycle.....looks like it will take some practice to do it properly
Thank u Sir....for give us such good leassons.....and Sir ur leasoons always helps me...
Superb explanation and technique! Kudos!
Lovely video!!! Waiting for more videos like this.....
I’m going to practice this until i master it thankyou bro😍😍
Your explanation is really good!! You explain very clearly it's really good to watch your video
Superb!
Thanks for sharing.
Vikas bhai can you please tell me if the masseters are a good option for a yamaha r15
Won't that burn the clutch ? If kept at friction point and increasing rpm
This is the real world tips, thanks Vikas vai
Very userul and detailed video. Thanks Vikas Sir
Got a very good direction on how to launch a motorcycle I was wondering on how could I launch a motorcycle without being a stupid infront of others. Shukriya bhai seekhane ke liye. 😊
@vikas after sometimes can we skip the front brake thing
Very useful video. Thank you @vikasrachamalla
Was waiting for Lauch video..I knew someone would make it some day! At that is you😋
can i use the rear break instead of the front break?
I really love your videos bro
Plz plz plz keep uploading
🤩🤩🤩
Sir plz tell me that is changing the sprockets in rc is safe for engine?
Thank you for making this video. Very well explained. Good job.
I was the one who asked for this video and well the answer isn't complete. I have a small doubt.
Consider the first 3 gears are short and the rest is long, at which rpm should I shift up in shorter gears and in longer gears?
I have heard that in long gears we have to redline it. But what about shorter gears?
Good work Vikas, I'm from Srilanka and I'm watching your every video, qnd I gotta say you're nailing the work man absolutely awesome. Upload more and more points about riding a motorcycle, specially about taking corners, counter steering, sitting position (butt out turning). Keep up the good work.
Thanks very much my friend.
Thank you for this useful info..
Sir I'm little confused I'm willing to buy a sport bike Yamaha r15v3 or pulsar rs200 which should I buy my hight is 5.10 I'm waiting for your suggestion sir...
Vikas you are the best 👌
You are awesome bro. Fan from sri lanka
Awesome bro 👍 love from Darjeeling
Hello Vikas
I own the 2017 Duke 390 and whenever I shift the gear up in low rpm the gear feels hard and when I shift down in high rpm it feels hard again. In city I cannot always change the gears at higher rpms so it feels quiet hard. At first I didn't mind it but now it's getting irritating. Do u know any solution to my problem. Thank you in advance
I can't thank you enough for this really informative video....
Please let me know one more thing... On motorcycles in which we don't know about the peak torque rpm how to find it out?
such a great info. :) thumbs up
Very informative, you have got a new fan bro... 🤟🏻😁
Sir need your help I want to buy a bike and i have two options Duke 390 And Apache RR310 which one should I buy?
Plz Reply........
A great video again...
One more request Vikash...
Since we see that TVS is about to launch a belt driven motorcycle "Zappelin", why don't you make a comparison video of chain, belt and shaft driven motorcycles...
I cannot match the throttle and clutch together so I keep it in 5000 rpm and slowly remove the clutch for normal rides is that ok
Sir, i have a doubt! Is it comfortable to pull front brake and accelerate at the same time? Can this trick be applied to all normal purpose bikes too?
ur a real motorcycling professional.....
Bro!!! Half clutch or full clutch ?
Which one is better?
Hello beginner here!
So if its okay to make the clutch slips?
I mean.. this trick is for race right?
Or there's a way to launch without have to worry the clutch slips so much?
Is higher cc bikes have launch control system ?
Thank you so much sir....... All confusion gone.......
Sir ji tussi great ho 😍😍
Bro.. what is the maximum torque or rpm to launch 200cc bikes? @Vikas Rachamalla
Well its a new knowledge for me 🙂
THNXX BHAI FOR TELLING US ... CAN U MAKE A VIDEO ON controlling throttle .. *how to twist throttle* .. when we have to increase speed , some off my frnd , they just twist the full throttle immediately .. to gain the speed ... but bike doesn't response fast
Duker Boy slowly roll the troddle. Vikas already made a video on how to have smooth and fast troddle control
Well even if u pull the full thing u waste fuel to my knowledge do it gradually the bike will speed up according to it's capacity of it's bhp and torque just full throttle dosent burn the fuel completely and causes problem in the engine if not on appropiate speeds
Tech Prady okkk thnxx u bhai
Tanmay P bro i have duke 250 😂😂😂 average doesn't mattr 😂😂 well thnxx u
Duker Boy not for avg man it just waste as the fuel does nothing just burns without use that's all it's just like u using clutch on the stop light instead of turning off the bike u are going no where faster but burning fuel instead of enjoying another couple of miles
When to change subsequent gears, at which RPM
Kya aisa karne se clutch plates burn nahi hoge?
Does it burns the clutch plates or not if we do so?
If I follow this process.. Will I burn my clutch plate? Because you told to keep the rpm at or under 3000 rpm, in your previous video!
Tanks bai... i am from kerala.. and i am your youtube student
Won't it harm the clutch plates?
BTW I have ns200 and doesn't get a slipper clutch
Hello sir
My KTM rc 390 2015
K engine oil burn ho rai hai Kya kharab ho gaya hai
'The best way to launch the bike' explained should be the title I am going to try it on a highway soon 😎
Hello vikas ji.. Your all videos are jst awsome.. I need one help from you.. Can you suggest me two bikes for touring purpose between Dominar 400 and thunderbird 500x..
Thank you
Your videos are really awesome......but they can be more awesome.....if you give us certain warnings....like this strategy would burn the clutch plate earlier than the anticipated time😊 awesome video....make one on revv matching
Please make a video for how to ride a newly bought motorcycle, at how much rpm to ride and speed limit. I have bought a new 2018 modle suke 390 i want to know about how much rpm and speed limit to rude my duke 390 befor 1st service. I want ur valuable advise and suggestions
But 390 is also powerful man...🔥
Your video about torque and bhp helps us alot.But still im confused then what does the CC do?Can u make a video explaining and relating all three?(Torque,bhp and CC)
Thanks to show us a good launch
Back with a new look💗😍
Great video 👌👌👌👌👌💥💥💥💥
Sir what about super bike like ktm super dukes they just do wheelies as the acceleration is given because they are hard to control
does it burn clutch??
that was really helpful, thank you!
Thanks for watching. Hope you enjoy my other videos too and hope you subscribe
Nicely explained👍
Wao good video this is what I wanted to know
That's a really helpful video! Thanks a lot. Now i know why racers rev their bikes like brmmm brmmm brmmmmmm..... 😅
whats maximum rpm limit for dominar ?
An informative one!
very informative buddy...
does it work with a 125cc
Bt wont this damage the clutch???
awesome video sir
But that will burn up the clutch plate much right?
Very informative sir !
Question : Most modern superbikes come with Wheelie Control. Does that help in better launch? Also does it require lesser skills to launch a bike with wheelie control on?
Bro nice and useful video. Can u make how to rev match video bro.I have been asking for many times.
Anyways the clutch will take a huge hit in life right ?? Even if you don't dump it
Awesome bro..
Thanks for sharing ur knowledge.
Thanks my friend
Bro how to do a wheeli in a sport bike and please add some videos on street race with ur KTM RC 3000
Love you bro.
Gud morning buddy hope you have any nice day ❤
Mikes on Bikes explains proper launch control. How do you launch yourself on a bike??? MotoJitsu also does a great job. Vikas’s showing should be the first before watching Mike or motojitsu
Agree man
How to improve this is to use your rear brake instead. The front will not rise during launch giving you a much more stable start. Also because you are not using front brake now it is also easier to control your throttle hand.
Nicely explained
Vikas anna why dnt u make a video abt how to drive a motorcycle !! ( for beginners )
No one :
Absolutely No one in the universe :
Vikas in his videos : *Buddies!!*
Isn't it good to pop up the front wheel slightly and gradually after 4k RPM so that you have less friction with the road giving a faster launch?
Marwan Nizamuddin
NOPE
Bro do a video on how choke works ..
Looking more handsome buddy .. what is the secret lol 😘😘
If our bike has quick shifter then also we have to push the clutch
Popping a wheelie will also make you lose traction on the front wheel, and might result in 'Tank-Slapping'
When i am riding downhill(down wards) and want to go in min speed at that position holding CLUTCH is good or should i leave my clutch.(At this position i dont want to use acceleration and my bike wants to flow by itself)
PLZ SUGGEST ME THE CLUTCH POSITION MUST BE AT THIS POINT.
No... You should pull the clutch only when shifting gear to lower speed. If you use keep pulling the clutch, it will disengage the bike from braking mechanism
Use front brake... lower the speed.... use clutch and downshift while slightly letting go of brake.... let go of clutch and use front brake.... do so till you reach the speed at which you want to ride in... keep throttle steading while applying front brake occasionally when the bike starts to gain speed
No bro holding the clutch will disengage the engine from the wheels so the engine braking will not effect to slow down the motorcycle in downhill
kishore s bro if want really smooth rides then shift to neutral and use brakes to slow down the motorcycle and u will save your clutch also
Sushanth PS what do you mean broo