Це відео не доступне.
Перепрошуємо.
How to Replace Headlights 05-07 Ford Focus
Вставка
- Опубліковано 30 січ 2014
- Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
In this video, 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the Ford Focus, years 05, 06, and 07.
This process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oge/1AX...
• Phillips Head Screwdriver 1aau.to/oge/1AX...
• 10mm Socket 1aau.to/ofb/1AX...
• 7mm Socket 1aau.to/ofb/1AX...
• Slip-Joint Pliers
• 1/4 Inch Socket 1aau.to/og/1AXA...
• T30 Driver 1aau.to/oaF/1AX...
• Ratchet 1aau.to/ogE/1AX...
Subscribe: / @1aauto
Check out our playlist:
Ford Auto Repair Videos: • Ford Auto Repair Videos
Ford Focus 2000-2011: • Ford Focus 2000-2011
How to Replace Headlights with parts from 1AAuto.com: • How to Replace Headlig...
For More Info visit us at 1aau.to/h/jC/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Didn't need a single tool to change the headlight bulbs on both sides. Seeing the whole unit out made it easy. It took 5 minutes to do both. Thanks for the video.
And because of this comment here, I tried removing the bulb before taking my entire front end off. So thank you sir. Only trouble I had was on the large rubber seal that goes over the whole assembly at the back of the unit (last piece to reassemble). After a few minutes of work, got it back on with a few scratches on the hands as proof of the work lol.
Seriously,
Before you go through all that bumper removal, just try wiggling them after removing the top two bolts. I had mine changed in less than twenty minutes without taking all that off. The new lights just slip right in over the dreaded third bolt.
Try it first. You can always keep disassembling if necessary.
You do not need to do so much work or remove the air-box from the driver side fender to get to the bolts. Just loosen and move the wheel well shrouds and go in from there. Much easier. All you need to do is remove the two fender screws closest to the tire, then pull the fender down and out far enough to reach the headlight bolt. Leave the splash-guard shroud underneath in place too, only take out the screws in the wheel well/fender area. Quarter inch ratchet drive set will get them all, and the fasteners are simple.
Changed my bulbs multiple times before, each time I had difficulty getting the new ones in. Seeing the whole unit out made it 10x easier to conceptualize! No more blindly twisting! THANKS!
+Mark Reyes We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393
This video is a lifesaver for those of us needing to change out discolored headlamps on our Focus...It is sad that auto manufacturers are allowed to use plastic in these items,which they KNOW are going to discolor a few years down the road...even worse is the fact that one has to practically dis-assemble the entire front end of the car to replace them due to the placement of ONE bolt on each headlamp...
The first minute and a half alone make this video worth the while. Thank you so much! There are forums dedicated to how difficult it is to simply replace the headlight bulb due to the difficult positioning. Your visual with the whole unit removed from the car made it SO much easier to work on mine and understand that there is a ring to remove. The owner's manual is extremely unclear. This went from a frustrating thing that I was resigned to take to a shop to a minor fix that took 2 minutes. Again, THANK YOU!
Thank you for watching.
1aauto.com 888-844-3393
Finally found a video that shows the real focus with all parts attached. All others, show pulling out the headlight with no problem, well big problem if you don't know those screws are under the fender when putting it back in. All others only showed taking off the grill or even not taking off the grill. Oh well, too late tonight to finish, but tomorrow I will do it the right way to put them back in. Great Video!
+Donna Leftenant Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
In fact you don't have to do any of that unnecessary work it took me 5 minutes per side to do mine and all the bolts were still there
awesome video. having the whole headlight out so you could see how it works was really helpful. just changed my bulbs in under 10 minutes!
+ComputerManDanMiller We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393
I found it much easier to just break the bottom bolt by pulling the lights assemblies out.
Followed video step by step and replaced headlight assembly with new ones from 1AAuto. Great price and car looks fabulous with the new lights. Of course the job takes a whole lot longer, especially with that air intake in the way, but nonetheless it is very rewarding to have the task complete. It was a good time with my son and we didn’t even have any spare bolts left over. Yeah for us.
+Mark Jones Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Don needs a raise. My boy boy got some speed
On the 2007 I only had to remove the two top 10mm bolts to remove the assembly. You have to wiggle it around to get it in though.
Great video, told me all fasteners that needed to be removed. Couldn’t ask for a better video. Thank yo
+A Peters Thanks for the feedback!
I agree with CJ My. Very helpful video. I just changed my bulb in ten minutes. Thanks guys!!
Thank you for watching.
1aauto.com 888-844-3393
First time changing my lights. Took me a while to pull out the old ones (They were really snug in there), but this video definitely helped me out.
+Gregory McKenzie Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
I can't believe 1A Auto is telling people to do all this unnecessary work you don't have to do any of this it took me 5 minutes per side to change mine what's next are they going to say you have to take all your tires off to change your oil 😆
You just saved me a bunch of time. Thanks!
This is stupid. -_- Who designs a car like this. Its almost like they didn't want to make repairs fast and efficient.
Engineers spend significant amounts of time making sure that everything fits. There is a ton of stuff that goes into modern cars, and compact cars are even harder to fit everything in to. I had a 2000 Camry (mid-size), which everything (except for the vacuum switching valve) was fairly easy to get to, now I own a 2007 Focus, and it's much harder, and you have to remove a lot more.
fast and efficient doesn't make money....
@@Bryanbobber the Ford company doesn't want it easy they want to service your vehicle and make 100: dollars an hour along with the rest of the auto makers it's all about money BUT A COUNTRY BOY CAN SURVIVE 🤠👍
It's not designed like this. You can change a bulb with 0 tools.
Only thing stupid is1a auto 😆 took 5 mins to change both on my 06 focus without taking anything off the car
You DONT have to take the bumper off and the whole air box out, once you take the bolts and fasteners off the fender liner and get it out of the way you can get the bolt out with a closed end wrench. Not a whole lot of room but saves you probably an hour and a half. I did one side in probably 15 minutes
+McFalls GT We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.
Thanks for posting....that looks like it was a pain in the neck! Poor Don got the short end of the stick for this video. ; )
+Shari T Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
All of this work is for one bolt take the others out and pull hard that headlight will come out you dont need that hidden bolt no flat rate guy would do this way
Thank you. I really wasn't interested in taking off the front bumper and air intake whosy-whatsit.
Should have worded the title better, as too many people are assuming all this work is just to replace the bulbs, and not the entire housing assemblies. That being said, I dont think i had to remove the bumper. It has been a while, but i think i just accessed the bolts from the wheel well.
You don't have to take the front bumper off take the grill out then two bolts on top of headlight. Then there is a bolt on side fender just eliminate the one on the side to me it's extra you have 4
points to hold the light in . I did it over the weekend took about 25 or 30 minutes.
Nicely done with your hand in the way the whole time in the beginning. Lol.
Couldn't you just remove the front tires and the wheel well cover to get to the two bolts??
Well you don't have to do all of this but I will give credit to seeing it all apart.
Excellent informative video great job guys do you ship to Canada
$80 for two headlight assemblies. Labor = $450.
Helpful video but ive never removed the bumper to change the assembly
How'd you get to the bolt inside the wheel well?
Is removing the air intake actually necessary??
Good information great job
Just unscrew the two bolts holding the headlight then yank it out. Did it right now to replace the socket.
Idk if its not being able to lift my car but this job has been the biggest pain in the ass.
I just need to replace the bulb, seems too much. Take the whole thing off. Can you help me.
Worst light ever changed. Takes me days on the driver's side. Nearly impossible and I've had this car since 2008. Valvoline won't even change the driver's side. I've always had to pay ppl or spend days until it sits in but never gets tight so it falls out constantly. Pure hell.
How about drilling a hole just big enough on the bumper to remove that side bolt and not remove the air intake box and the bumper itself?
I'm gonna do that.
+June Burton Thanks for checking us out. 1AAuto.com
Many thanks! So easy!
If I'm only trying to change the bulb...do I have to do all or that or no ?
+Drey Wardell Curry You might be able to reach around the back of the headlight to access the bulb. Hope this helps you out
All this work to change 2 Headlight bulbs? Just reach behind the headlight assembly pull off the rubber cover, twist the plastic ring counter clock wise, pull out the old bulb and put in the new one, done in 5 minutes.
Also have to adjust the lights.
Hope do i change bulb in 2005 ford focus Drivers side.
Does any one know how to fix a dim headlight on this car put new bulbs one is still dim can anyone help can’t find ground
Do you have to disconnect the battery before doing this?
+Rikigoya You do not need to disconnect the battery when performing this repair. If you or any of our viewers would like to purchase the parts shown in this video please click the link! www.1aauto.com/1A/HeadLights/Ford/Focus/1ALHP00414?UA-cam&CTA+Comment&AmVERkT9Q
I got about halfway through the video before I had to ask myself WHAT they were actually doing. I'm like, "why are they removing the bumper?" Then I figured it out. It's a Ford.
.
.
.
... and I may or may not be buying one of these PITA's in about 8 hours... God help me.
Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c +Richard Bush
Do I need to take off tbe whole grill and bumper to change a measely bulb?
+BtotheG98 If you can't fit your hand behind the headlight to access them, you may have to remove the headlight. Hope this video helps you out. 1aauto.com
Very helpful
+Carrie Ware We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393
I never changed a headlight bulb in my life, always had my brother do it. But last time I needed a bulb changed he said all these tools were required, so I brought it to the garage. Paid $30 for a bulb but they put it in free... I watched and he just popped it out and a new one in.... I left and later realized the bulb was in crooked and was blocking light... So, today I opened the hood, stuck my hand in there and felt around till I figured out how it works, popped the light out and put it back in straight. I don't understand what the problem was in changing a simple bulb. This video is too much, with taking the whole front end of the car apart. If I had to do all this then I'd pay the garage to do it.
+Christine Church We're mostly showing how to change the entire headlight assembly, not just the bulbs. Unfortunately the assembly is not as simple to change like a bulb is.
I just want to thank FORD for making DIY projects so difficult. It is clear that they only want to get these puppies assembled quickly, and don't care that someone may have to pay a dealer an outrageous price for a job that should be fast and easy. Oh wait, that is part of the plan isn't it. Soon they will have us pulling the engine just to replace a headlamp. Ford is just another ripoff company following Chrysler when who started their 5 year 50,000 mile planned obsolescence warranties of the nineteen sixties. Sure, cars last longer, but look at what maintenance costs. All of the car ads keep telling us that we're getting thousands of dollars in discounts, so we can pay through the nose down the road. I think that I'll stick with my 1954 Willys 3b, and send my 2005 Focus an 2004 F150 to the dump. The special tools and unreasonable parts prices are ridiculous.
I have a 2005 ford focus and for some unknown reason the drivers side headlight is backwards in that when I turn the brights on it points down and closer to the car and reverse for dims, the passenger side works normally. I've had the headlight assembly's both out replaced bulbs looked at everything carefully and still can't figure it out!! Dam ford it drives me nuts!!!!!
Whats the name of the part he takes out at 1:38 ? I've been trying to find it online but have no clue how to properly search for it.
+adrek09 That is just a radiator shroud! 1aauto.com
No need to take the bumper off or the six bolts holding it on.....take the underside front bumper skirt off....(I can't believe these guys worked by pulling it back) sorry guys...grill off....left spot / fog light out if you have one.....the complete air intake box / housing off ..(I pulled all three pieces that way you know it put back together correctly) ...you can access the single left headlight bolt with a flat wrench after doing this.......if I did it again I would take the left front wheel off and the left fender skirt to be able to access the intake snorkel as it came loose during the process and needed to be put back on.....the snorkel rubber mount is clipped into the snorkel and when I pulled the air box off it popped off...the intake snorkel is directly above the left inside fender skirt.the right headlight should be the same ..only easier as there is no air box on that side.....I didn't take it off but that single bolt should be accessible with the front bumper skirt off ......no real shortcuts here....poor design.
Absolutely not. If you are slim like me simply turn the wheel to the right and pull the under cover away and side cover out. Use your ratchet plus extension to remove the drive side bumper bolts. And mine didn’t use 7mm but 9/32. Hope this helps but you do not need to even touch the air box. I recommend doing the passenger side first so you know exactly where the 10mm bolts will be.
Couldn’t you just loosen the bumper cover sides and wiggle the head light bolt out ?
I will try this out. Let you all know.
+A Peters Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
dont inderstand why you removing all that splash guard and front bumper ? lol
Ford should be ashamed of themselves. That's ridiculous. Not difficult, but a RIDICULOUS amount of work required to perform what should be a simple task. 🤦🏼♂️
Oh yeah, lets put this up on my hoist that I have in my garage. Strange one has to disassemble the whole fricking front end to replace a bulb....are you kidding me??? Half hour replaced both lamps, no tools. I could have used some advice on how to do it without removing the front of the car. NO, it didn't help.
Why would Ford make it this way? Why?
How to replace headlights...
-remove entire front of the car..
What the actual F
What in the actual fac 😒 looks easy
Thanks for checking us out. 1aauto.com +Black hawk assault Bullet storm
I appreciate the video but i see why mechanics make so much money. You basically removed the front clip to change a few bulbs. Good job though, not dissing the work. Just the amount of unessential work.
+Jdubb Whitelightning Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Holy Lord. Ford should be ashamed of themselves.
You are doing that the very hard way.....
+Thomas Pyke Thanks for the feedback!
This has to be a joke this is the stupidest designed car I’ve ever seen
What a ridiculous design