The fact that he took a seemingly broken and unrepairable headlight and used an open flame and didn't damaged the frame or the plastic and made it look like brand new is just remarkable. Kudos to that man right there.
Doesn't look brand new. Most of the color comes off but still some of that yellow is there and can't really do much about it. and some of the clarity is gone too...
Not sure what the point of the video is appart from waste of time that light no good to anybody in about 2weeks as that plastic is so brittle it will probs just crack even more
The reflector is probably the hardest to get right. Given the tools at hand, nicely done. Headlights are not designed to be repairable so this is no easy feat. Well done sir.
here ,the labour is cheap ..thats how they are able to do so. or hence is always advice to apply stickers on the headlights or replacement is the option ..
I just love these guys. Setting on the floor bringing something back to life. One mans junk is another mans job. Great job. Even with despair in his eyes. Stay strong dude. I think all these guys are very honorable. And have my respect way over some fat rich person. Gods speed and peace.
@@XxgoodbudsxX most people get rich by taking advantage of other people, and being greedy and corrupt. Guarantee there are very few honest rich people.
He’s clearly very skilled at this work, the end product looks a lot better than if I tried it for sure. He’d fire me on the first day. That Mylar for the reflector and the old battery clamps, pretty genius! Also, this young man has an impressive head of hair! 😄
@@strawsparky33 yea nothing sadder than being "moved" by a headlight 🤣🤣 are you a soft gentle little man too,maybe you guys should write a poem to the headlights that couldn't be repaired 😭😭 I'm so touched by you headlight humanity, perhaps if everyone cried over car parts there would be no famine or crime 🤣🤣
Very impressive considering how hard it is to work with these, and the fact they are made to be scrapped when worn out or cracked. Nice craftsmanship here. 👌🏼
The fact he can seperate the butyl with an open flame and not damage the light is just amazing. And for anyone who doesn’t know CA glue (super glue) and baking soda is what they use to repair chips on an aircraft, ether it be nose, wing ect ect, it’s actually a really really strong bond
I don't know where did you get that info, but even if somebody does this on an aircraft, it is temporary and only serves to fill micro-dents, just to preserve aero dynamics, not repair actual structural damages to the fuselage.
I love seeing how people in other countries actually fix things instead of buying a new one. Some of my old cars have no parts availability so I might need this!
This guy really has passion in fixing and reviving old car lights.I admire the guy.With limited tools he revives car light lenses.this is touching.Hes probably supporting his family with this that's why to him it's a serious matter and that's precisely what it is.
@@vulcano911 It is something humans do naturally from childhood, but most westerners have developed our musculature differently, because we don't have the cultural habit of sitting this way. We are so accustomed to sitting on chairs, that most of us can't sit on the ground anymore. It's like I learned that people before modern times walked on their tip-toes. This was before shoes with heels were invented, and it made it so that people had a completely different posture. If you look at antique and medieval paintings and sculptures, you can see this, but most people just assume it is some kind of stylised depiction. No, turns out people walked on their tip-toes just like small children do.
You don't work you go hungry, Here in the west work is a option, A life choice!!In my opinion this is part of the many reasons Britain is failing and in decline such a shame!!!😢
Incredible ending that headlight. After being completely trash, this man brought it back to life in such an amazing way. Congrats for your effort, ability and perfection at work!
Not to sound dismissive, but this is the equivalent of detailing dirty interior in a car. Any headlight restoration video will produce these results. Even toothpaste restoration videos. I was hoping to see the patch disappear, but you can still see it pretty well in the last shots
@@zoesheck Where did I suggest any of that? I started out by saying "not to sound dismissive" meaning not to dismiss what he's done to the light. Just because he comes from a poor country doesn't mean he's incapabale or less than, but the majority of what he's done is cleaning it up. Like I said, had he fused the plastic together and made the seam dissappear, I would absolutly find that impressive.
@@Moises-kf1hg there’s no way to make that seam disappear. Whatever bonding method is used will create a seam. Or a discolored line where the two plastics bond. Yes, the cleaning part is not anything new, but the repair is the best possible.
Паренек мастер своего дела. Не имею представления сколько прослужит эта фара день или годы, но мастерство и умение использовать минимум средств для выполнения этой работы впечатляет. Успехов в продвижении своих навыков мастеру
This doese not help at all when there are countrys that dump trash into rivers and oceans by truck loads... This is like taking single pine needle Out of pine forest...
I watch these videos to learn how to repair my own cars. Here in the U.S. everything is disposable and no one actually fixes anymore. Thank you for the insight
Так можно чинить и современные фары. Просто нужно немного времени. У вас в США нудно много работать, чтобы оплатить то что у нас в РФ идёт бесплатно или стоит малую часть зарплаты
I'm constantly amazed at how basic their work environments are yet how impressive their personal presentation is. Seeing the children go to school each day with not a hair out of place and beautiful clean clothes.
i've seen lot of videos of this kind. These people repair and recycle everything. Doesn't matter what they have the technique to fix it, and using extremely basic resources. Congratulations!!! I hope everybody could do the same!
That's the difference in other part of the world they will tell you how to DIY. And than introduce 10 products and diffrent tools to use. Here it's just basic tools you will find at your garage or your local store.
Ничего сложного в таком ремонте нет... к готовой фаре 2 вопроса: действительно ли герметична сборка на старый герметик и сколько месяцев фара будет белой с содранной УФ защитой при их Солнце? Или купить лак за 300р, чтоб задуть фару, это обязанность клиента?
Wooaaw.. yes definitely.. the before and after results are really outstanding, the skills and talent of such working process, but also considering working conditions and primitive tools of crafting on the side of the road.. absolutely mind bending..
I've repaired lights before. Its NOT easy. They are designed to be scrapped, so well done young fella. Great workmanship and excellent recycling skills. I genuinly believe if we watched you, western industries and their practiced could relearn what we have lost.
Nah, there's nothing to learn here. That light is utter rubbish and nobody in their right mind would spend hard earned cash on it. That lamp hasn't been "restored" or "repaired", it was patched together and will haze over, leak, and have piss poor light output for the few weeks it will hold together. The lousy paint he put on the damaged reflector will peel and fall off, further killing lumens downroad. I guess if you only have pennies to spare and don't really care about actual product performance or longevity then this kind of thing may impress. But it certainly won't fly in an industry where consumers are entitled brats and parts/repair warranties commonly push 2 to 3 years.
@@fordguy8792 That is relative, if you live in a country with next to nothing, no Home Depot just down the road, and probably no electricity, this type of skill is necessary to survive. That was an impressive video.
Без нанесения нового защитного слоя эта фара, максимум через месяц, будет выглядеть ещё хуже, чем до ремонта. Ровно тоже можно сказать о налеивании плёнки на отражатель. Там тоже срок жизни можно измерять часами. Алюминиевая самоклейка держалась бы гораздо дольше, как и краска "хром" из баллончика. Ну и применение супер клея с содой - 1) матовый непрозрачный шов; 2) сам клей очень агрессивен к поликарбонату. В последующем от шва будут расходиться концентрические трещины. Эту фару можно смело выкидывать. Видать это с ней и сделают, раз даже синюю краску от предыдущей машины не очистили. А счищать её не стали, потому что под ней будет матовый поликарбонат. С ней не так палевно. Можно отмазаться, что забыл.
Если этот чел мастер, то пускай вам такой попадётся в сервисе, где вы обслуживаете свой авто. На заводе делают на рефлекторе из высокотемпературного пластика специальное напылением. Даже на китайских фарах, где китайцы пытались быть похожими по качеству к заводском тоже спец металлизированное покрытие. У этого чурки все просто, обычный скотч с краской, даже не алюминиевый. Он облезет за пару дней эксплуатации на жаре или тупо от перепада температур. Отдельного внимания стоит прозрачный пластик. Наверное никого не смущает, что его лепуха из суперклея и соды свет не будет пропускать вообще, очень хотелось бы увидеть как "светит" такая фара. Не просто так у нас техосмотр не пройти даже с просто трещиной в фаре.
@@Paylik1987 Дело не в этом. Вы не поняли мою мысль. Понятно, что вот это на коленке сделанное ненадолго. Я хотел сказать, что у парня руки оттуда растут и при получении доступа к соответствующему инструментарию, он будет творить чудеса.
@@АлексейПавлюк-ш5я было бы желание и почти у каждого получалось бы нечто подобное. Только зачем? Это все равно что разорванную покрышку от авто пытаться восстановить с помощью шила и обувных ниток
@@Paylik1987 и снова не соглашусь. Большинство людей рукожопы в таких делах. Я не говорю, что невозможно научить. Почти любого наверно можно, но по факту людей с золотыми руками не так много. Поэтому они и ценятся в любой сфере деятельности.
@@mauriciocampos2192 Es obvio que no entendiste el sentido de mi comentario, y me tomaría tanto tiempo explicártelo de un modo que lo puedas entender que creo no tiene sentido hacerlo. Bye.
@@viralmemes8960 OMG... Maybe you should read carefully and really try and understand what people are writing/saying, before applying your professional opinion little friend!! THE GUY, (JESUS) ARE COMMENTING..... FROM THE U. S. A
I love the idea of recycling, I guess in some places it's out of necessity but we generally have become a 'throw away ' society. Very satisfying to see the skills displayed here.
This is when you get poor, than you find out, you have a brain and hands.. This is what they have to do,.. He whats light, he gets light, but do not ask if this will do a correct light spreading,... But respect to them at all...he solved the problem at there standart...
Skilled and amazing to watch. I have learnt so much from watching these people and applying it to my own problems. Well-done to all street repair specialist!.
@@stasmasloff27 да нас тоже в каменный век загнали но по сути они просто используют старые совковые технологии и даже их у нас путерасты украли ,я смотрел как тут генераторы делают я так же делал в 2002 году на стажировке !
@@stasmasloff27 и ты правда думаешь что фара с зеркальной пленкой будет светить хорошо ? могли бы хотябы снять кротом хром и сделать его по новой химическим нанесением все реактивы можно найти!
Europe's garages are just replacing but no more repairing. Such skill is entirely lost. Really admire what this guy can do with minimal tools and even keeps his clothing clean while working.
@@PeterKupietz No reason why we can't replace the outer lens (if available) but "fixing" plastic like that, especially with LED or HID is a no no, the optics are too critical to consider doing it. Nice work though when choices are limited!
@@hoojchoons2258 not only that but once taking apart getting the lens sealed all the way requires more the just warming it up and clamping together so that headlight is no longer water tight , they actually recommend using an adhesive as well when changing the lens , me and my dad changed the lens on his vw from plastic to glass lenses because the plastic turned yellow and white and cost more the the glass lenses
This is not a real repair this is a temporary I can't buy a new one or go to a junkyard and get one if you ever disassembled headlights and rebuilt them or modified them you would know that the inside is not 10 for like what he has here it's a extremely highly reflective paint Metalized paint so don't think that this is a good job that thing will barely be bright enough to light the streets you wouldn't be legally allowed to drive with these in any country other than a third world country also with all the debris chemicals and everything going into those drains and just going into the ground that would be against most laws from the EPA
Queria saber que adesivo refletivo foi aquele que ele colocou na parábola que aguenta tanto calor gerado pela lâmpada. Tô com meu farol aberto só esperando isso. Ela.tb tá queimada como a dele tava.
@@samaranc2008 amigo existe um tipo de adesivo que dá pra usar, chama speed tape usada em aviões, é uma fita aluminizada que eu ganhei de um amigo que trabalha com helicóptero, mas tem a venda no mercadolivre
También le dejo la pequeña mancha de pintura azul... Ahora con tu duda, supongo que fue al propósito para que se corroborará que era la misma pieza que empezó a arreglar y no la cambio por otra pieza que estuviera en buenas condiciones. . saludos
@@samaranc2008 colocou a fita refletiva pois não existe nenhuma tinta “cromada” que fique realmente igual ao cromo original… Todas essas tintas que existem por ai acaba ficando “fosca” como se fosse um spray prato comum. Nesse caso, ele usou a fita refletiva pra manter a funcionalidade do farol de iluminar, de refletir a luz… O mais correto seria fazer o “cromo” em si, que na verdade chama-se aspersão química (é diferente do cromo em metal, e poucas pessoas fazem)
This light would definitely be scrapped in the UK & I doubt anyone could fix it, let alone fix it to a high standard and you can’t even tell if it’s been repaired! WOW! 👏👏👏 Ma’sha’llah 👌
No one would bother fixing it, the labour involved would outweigh the cost of a new headlight more than likely, not to mention the fact that you can very much tell it has been repaired, can easily see the patch that has been added, this would also more than likely fail an mot due to distorting the beam pattern. There's a reason this isn't done in the UK 👍
@@TheWildPikey Yeah just like the all the 'clean' accident damaged cars going around 😂 I promise you alteast 90% of people would never clock it's been repaired. You only know because you've seen the work been done. These lights are from the 80s maybe 90s also so this repair would only make them better 😂
@@nahmed92 accident damage repairs are an entirely different topic which I wasn't talking about and actually I can clearly see it so whether or not I'd seen it being repaired I would see that and if someone didn't see it then it would still fail an mot!
Joder,que humildad,con cuatro cosas y a usar otra vez , eso si es ser mecánico (ser capaz de reparar) no cambiar piezas viejas por nuevas !! Gran trabajo
Excellent job. I've only ever popped open these types of lights to replace the lenses with new ones. This is a great and economical way to repair these.
De verdad que es un maestro este artesano. Un trabajo digno que debe valorarse no por lo que cuesta, sino ponlo que vale una mano de obra tan calificada.
Отлично сделано, насколько возможно восстановить фару, так он это сделал на 100℅ учитывая технологию гаража. Если бы ещё научились хромировать пластик, то цены бы не было.
@@АлексейЮсупов-ю5ы когда то в студенческие годы востанавливал такой плёнкой (оракал самоклеющийся) фары на "Оке", отражатель внешне там такой же. Год продержалось и не поплыло
Хром на отражателе сгорел, ни одной пленкой не заменить его, лично проверял все варианты, чисто для красоты наклеили. Полировка на пару месяцев, нужна пленка или лак, а учитывая сколько они пластика срезают, это точно одноразовый ремонт))
Это не плёнка а ремонтная амальгама используется при ремонте зеркал. на 100% конечно не восстановит но % на 60-70 будет лучше. и пластика он счищает мало совсем. у нас наждачкой при полировке удаляют больше. Конечно лаком надо покрыть для защиты это да. А так для таких условий работы это вообще прекрасный ремонт.
Алюминиевый скотч с последующей полировкой его в зеркало, на какое то время помогает. У них видимо денег на новые фары нет, вот и крутятся как могут, молодцы ребята
@@АлексейЮсупов-ю5ы диодные линзы тоже не все могут себе позволить. Поставил биксеноновые с галогенками, шторку дальнего подключил через пятиконтактное реле. Вот буквально вчера поменял поворотник передний, после дтп заменил на нем стекляшку на прозрачный пластик рекламный (пэт), год с ним проездил, пока новый не купил
Nice technique. I had to do this myself because a new headlight was $400 and I wanted to take a chance. I used epoxy resin but the same idea. You can also use toothpaste as a buffing compound to polish the lens.
This guy is very skilled in repairing things that are thrown to the garbage where I live (Austria). Respect & Thanks for giving insight to this amazing technique 👍
انها العزم والقدرة على مواكبة التطور وان هذا البلد رغم قلة الموارد الا انهم فعلا اجادوا ما اردوا وياليت باقي الحكومات تدعم مثل هاولاء المهنين والحرفين فهم تاج البلد وخذا فعلا نقلةللتقنية وان كانت يدوية الا انها قمة وجودة
¿99,99% de ceguera? Si el faro no está PERFECTAMENTE sellado, se empañará... Además, sólo pulir es malo porque no hay más protección contra los rayos UV. 99,99 % d'aveugles ? Si le phare n'est pas PARFAITEMENT hermétique, il va y avoir de la buée ... De plus, le simple polissage est mauvais car il n'y a plus de protection anti UV
The fact that he took a seemingly broken and unrepairable headlight and used an open flame and didn't damaged the frame or the plastic and made it look like brand new is just remarkable. Kudos to that man right there.
Doesn't look brand new. Most of the color comes off but still some of that yellow is there and can't really do much about it. and some of the clarity is gone too...
Not sure what the point of the video is appart from waste of time that light no good to anybody in about 2weeks as that plastic is so brittle it will probs just crack even more
The reflector is probably the hardest to get right. Given the tools at hand, nicely done. Headlights are not designed to be repairable so this is no easy feat. Well done sir.
Parabéns
Once labour reaches a certain price, voila, nothing gets repaired.
here ,the labour is cheap ..thats how they are able to do so. or hence is always advice to apply stickers on the headlights or replacement is the option ..
it's sad that there is no ppe though, inhaling plastic dust isn't good
I know 15 years a headlight cost 700 and up in Texas
I just love these guys. Setting on the floor bringing something back to life. One mans junk is another mans job. Great job. Even with despair in his eyes. Stay strong dude. I think all these guys are very honorable. And have my respect way over some fat rich person. Gods speed and peace.
There are very honest person's..
You know to get rich most people work hard. But you know hate people for making money makes you cool I guess.
Well said my friend.
@@XxgoodbudsxX most people get rich by taking advantage of other people, and being greedy and corrupt. Guarantee there are very few honest rich people.
@@jimmywhitlow2012 source: trust me bro
He’s clearly very skilled at this work, the end product looks a lot better than if I tried it for sure. He’d fire me on the first day. That Mylar for the reflector and the old battery clamps, pretty genius! Also, this young man has an impressive head of hair! 😄
yeah very very very skilled... lmao
@@visionboxed I'm awaiting YOUR diy repair video eagerly! 🍻
I was thinking the same thing on his hair. 😆😆
The guy has no idea that in 3 month this video has made him more famous then the celebrities of Pakistan 🇵🇰 . Great skill 🙌🏻
That guy should have his UA-cam channel
@Nbomber 15 million views maaybe not year but all life i guess
Not really
And that someone’s making bank off of him. 🎉
He probably don’t even know how many views it has. He’s not the one who uploaded the video
Incredible skill. Very moving to see somebody with minimal tools still able to accomplish so much.
Moving?? Did you have a wee cry?You need to go get a ride mate even if you have to pay for it 🤣
@@hoping67 the troll casts a line......only to reel in depression and sadness.
@@strawsparky33 yea nothing sadder than being "moved" by a headlight 🤣🤣 are you a soft gentle little man too,maybe you guys should write a poem to the headlights that couldn't be repaired 😭😭 I'm so touched by you headlight humanity, perhaps if everyone cried over car parts there would be no famine or crime 🤣🤣
You dame we'll know it's not happening here!!!!👍🇺🇲🇺🇲🇺🇲
Да
Very impressive considering how hard it is to work with these, and the fact they are made to be scrapped when worn out or cracked. Nice craftsmanship here. 👌🏼
Muy de cerca para poder ver la cicatriz wooou quedo impresionante esa lámpara
You can see these type of artisans in only developing countries
@@beakay.1834 because we cant afford to buy a new brand one 😅😅
@@hamzajon8823 есть и плюс. В отличие от богатых стран, вы сможете выжить, если вдруг закроется магазин или отключат свет. А они просто вымрут.
aaaAAaaaaAaaaAaAaaaAa
The fact he can seperate the butyl with an open flame and not damage the light is just amazing.
And for anyone who doesn’t know CA glue (super glue) and baking soda is what they use to repair chips on an aircraft, ether it be nose, wing ect ect, it’s actually a really really strong bond
I don't know where did you get that info, but even if somebody does this on an aircraft, it is temporary and only serves to fill micro-dents, just to preserve aero dynamics, not repair actual structural damages to the fuselage.
@@dante_di_martino
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤😂🎉😢😮😅😊❤❤❤😂😊❤😂😊❤❤
Nothing goes to waste in these parts of the world. Very impressive bringing back to life a part that would otherwise be scrapped
And they call the west green...making you but all these nonsense electric bull***t
Yeah, but the title is misleading, $5 fix with $200 torch.
a lot of this work happens where parts are expensive and labor is cheap .
@@turboturtle9083 and there is no rules
@@ADHDsquirl so if you take your car to a mechanic the price of the hoist is included in your cars service???? Don’t be a fool
The ability to do what he does is great to watch. Fixing things is nice.
I love seeing how people in other countries actually fix things instead of buying a new one. Some of my old cars have no parts availability so I might need this!
That's true❤❤❤❤ love Pakistan
This guy really has passion in fixing and reviving old car lights.I admire the guy.With limited tools he revives car light lenses.this is touching.Hes probably supporting his family with this that's why to him it's a serious matter and that's precisely what it is.
I don't understand how they can spend so much time sitting on their haunches.
no passion, just trying to survive..
@MozarAbubakar thanks for comment, susbcribe for watching more videos
@@vulcano911 It is something humans do naturally from childhood, but most westerners have developed our musculature differently, because we don't have the cultural habit of sitting this way. We are so accustomed to sitting on chairs, that most of us can't sit on the ground anymore.
It's like I learned that people before modern times walked on their tip-toes. This was before shoes with heels were invented, and it made it so that people had a completely different posture. If you look at antique and medieval paintings and sculptures, you can see this, but most people just assume it is some kind of stylised depiction.
No, turns out people walked on their tip-toes just like small children do.
You don't work you go hungry, Here in the west work is a option, A life choice!!In my opinion this is part of the many reasons Britain is failing and in decline such a shame!!!😢
Incredible ending that headlight. After being completely trash, this man brought it back to life in such an amazing way. Congrats for your effort, ability and perfection at work!
The west would recycle the materials and produce a new part. What’s going on her is dangerous and poisonous. Stop romanticizing poverty and misery.
Sir, can you please give me your channel? I love old channels that are more than 15 years old
Yeah. Incredible as this is fake 😅
Innovation comes from necessity and these guys have some top notch craftsmanship
That is impressive.
I did not think plastic could be recovered so thoroughly.
The reflective foil...perfection!
Not to sound dismissive, but this is the equivalent of detailing dirty interior in a car. Any headlight restoration video will produce these results. Even toothpaste restoration videos. I was hoping to see the patch disappear, but you can still see it pretty well in the last shots
@@Moises-kf1hg , agreed , time to buy a new ONE , who needs recycling or appreciates the skills of poor fellaw !!! 🤓
@@zoesheck Where did I suggest any of that? I started out by saying "not to sound dismissive" meaning not to dismiss what he's done to the light. Just because he comes from a poor country doesn't mean he's incapabale or less than, but the majority of what he's done is cleaning it up. Like I said, had he fused the plastic together and made the seam dissappear, I would absolutly find that impressive.
@@Moises-kf1hg , agreed , time to buy a new ONE , who needs recycling or appreciates the skills of poor fellaw , mostly it just a cleaning job !!! 🤓
@@Moises-kf1hg there’s no way to make that seam disappear. Whatever bonding method is used will create a seam. Or a discolored line where the two plastics bond. Yes, the cleaning part is not anything new, but the repair is the best possible.
Паренек мастер своего дела. Не имею представления сколько прослужит эта фара день или годы, но мастерство и умение использовать минимум средств для выполнения этой работы впечатляет. Успехов в продвижении своих навыков мастеру
Лаком покрывать надо, и бронепленкой, иначе пару дней, и она мутная.
@@galereysnov74 Всё верно, голый пластик очень быстро помутнеет и зацарапается.
@@oleg_nikolaich а то что пленку на отражатель наклеил? Через сколько она отвалится? Эту фару после такого ремонта только выбросить
@@Иван-х7о6в это фольга. Главное клей термостойкий..
А тебя не смущает что места склейки пластика нет
I'm in the few people in my area who is bothering to restore headlights In and Out. Today i learned some tips. It's greatly appreciated. Thank you! 😃
😂
Agree with Cole, excellent workmanship, genuine recycling in action, respect man!
The way he is adding that baking soda, its like one continous stream falling from his hand. Its one of the most trained hand for work ive ever seen
Мастерство и опыт!Дай Бог успеха в труде!
It's the real meaning of recycling. Double thumbs up!
This doese not help at all when there are countrys that dump trash into rivers and oceans by truck loads... This is like taking single pine needle Out of pine forest...
Oh 😅
I watch these videos to learn how to repair my own cars. Here in the U.S. everything is disposable and no one actually fixes anymore. Thank you for the insight
Don't repair the reflector with aluminium foil though, bad idea..
@@patverum9051 с помощью тонировки 😅
Так можно чинить и современные фары.
Просто нужно немного времени.
У вас в США нудно много работать, чтобы оплатить то что у нас в РФ идёт бесплатно или стоит малую часть зарплаты
Can I join you 🤩 and repair those together 💯
It's just not economical. Look how many resources went into this.
I'm constantly amazed at how basic their work environments are yet how impressive their personal presentation is. Seeing the children go to school each day with not a hair out of place and beautiful clean clothes.
i've seen lot of videos of this kind. These people repair and recycle everything. Doesn't matter what they have the technique to fix it, and using extremely basic resources. Congratulations!!! I hope everybody could do the same!
So True 😎❤️😉👍
टूटे हुए हिस्से के बारे में क्या?
That's the difference in other part of the world they will tell you how to DIY. And than introduce 10 products and diffrent tools to use. Here it's just basic tools you will find at your garage or your local store.
O wonder why Africans don’t behave like that. They are poorer than Indians! They should imitate
Удивительные люди! На коленке. Рашпиль,суперклей. И так любые вопросы решаются. Молодцы!!!
этот народ кольты 911 е на корточках делают гидроцелиндры для грузовиков итд итп
Не делают они ничего - колхозят вещи с помоек цивилизации. Молодцы не такие нищеброды как вы , а те кто это изначально производит и придумывает.
потом этот суперклей отлетает через месяц)
@@vladimirabonimentтам супер клей с содой или типа того. Там материал не слабее эпоксидки, так что если и отлетит, то пройдут годы
Это перегон наверное тоже из орг стекла
I hope. I pray this man lives a great life . A decent life. What skill. Talent. Humans are awesome moment
just a lot of RESPECT for these folks!
Отличная работа! Золотые руки у него.
Ничего сложного в таком ремонте нет... к готовой фаре 2 вопроса: действительно ли герметична сборка на старый герметик и сколько месяцев фара будет белой с содранной УФ защитой при их Солнце? Или купить лак за 300р, чтоб задуть фару, это обязанность клиента?
Guy deserves much more then what his country's market has to offer ... great craftsmanship brother!
Wooaaw.. yes definitely.. the before and after results are really outstanding, the skills and talent of such working process,
but also considering working conditions and primitive tools of crafting on the side of the road.. absolutely mind bending..
Pakistan?
@@trillionairecapitalist4905 perhaps Bangladesh.
Молодец , золотые руки , уважение мастеру!!!
Тупой как пробка! Потратить столько времени и не понять, что заказ б/у фары гораздо быстрее!
I've repaired lights before. Its NOT easy. They are designed to be scrapped, so well done young fella. Great workmanship and excellent recycling skills. I genuinly believe if we watched you, western industries and their practiced could relearn what we have lost.
Nope, if you talking about USA here if you become really creative the FBI will put you in jail always a greedy and corrupt politician will get you
Nah, there's nothing to learn here. That light is utter rubbish and nobody in their right mind would spend hard earned cash on it. That lamp hasn't been "restored" or "repaired", it was patched together and will haze over, leak, and have piss poor light output for the few weeks it will hold together. The lousy paint he put on the damaged reflector will peel and fall off, further killing lumens downroad. I guess if you only have pennies to spare and don't really care about actual product performance or longevity then this kind of thing may impress. But it certainly won't fly in an industry where consumers are entitled brats and parts/repair warranties commonly push 2 to 3 years.
@@fordguy8792 That is relative, if you live in a country with next to nothing, no Home Depot just down the road, and probably no electricity, this type of skill is necessary to survive. That was an impressive video.
single Stone hits repaired Part on highway and there Will Be Even bigger hole
@@fordguy8792 at least one person with common sense.
Wonderful to watch..In most of the World, we live in a through away society ..
@brian mitchell thanks for comment, susbcribe for watching more videos
Отличный мастер своего дела! В каких то странах их выкидывают, а в каких то на вес золота! Восхищаюсь мастером!
надо перенимать опыт.Нам пригодится.
Еще бы ему инструмент для работы нормальный
Без нанесения нового защитного слоя эта фара, максимум через месяц, будет выглядеть ещё хуже, чем до ремонта. Ровно тоже можно сказать о налеивании плёнки на отражатель. Там тоже срок жизни можно измерять часами. Алюминиевая самоклейка держалась бы гораздо дольше, как и краска "хром" из баллончика.
Ну и применение супер клея с содой - 1) матовый непрозрачный шов; 2) сам клей очень агрессивен к поликарбонату. В последующем от шва будут расходиться концентрические трещины.
Эту фару можно смело выкидывать. Видать это с ней и сделают, раз даже синюю краску от предыдущей машины не очистили. А счищать её не стали, потому что под ней будет матовый поликарбонат. С ней не так палевно. Можно отмазаться, что забыл.
Согласен с предыдущим комментарием, работа на отъеб..сь.
В конце ролика у него совершенно другая фара, не ремотированая ,а новая, наебалово как всегда
Шикарно. Впечатляет. Из подручных средств так восстановить убитую фару. В профессиональной мастерской он будет творить чудеса 💪🏻
Та нунах. Представь как будет светить эта наглухо затертая фара. Баранам пофиг, сколько народу потом задавят, благодаря "хорошему " свету.
Если этот чел мастер, то пускай вам такой попадётся в сервисе, где вы обслуживаете свой авто. На заводе делают на рефлекторе из высокотемпературного пластика специальное напылением. Даже на китайских фарах, где китайцы пытались быть похожими по качеству к заводском тоже спец металлизированное покрытие. У этого чурки все просто, обычный скотч с краской, даже не алюминиевый. Он облезет за пару дней эксплуатации на жаре или тупо от перепада температур. Отдельного внимания стоит прозрачный пластик. Наверное никого не смущает, что его лепуха из суперклея и соды свет не будет пропускать вообще, очень хотелось бы увидеть как "светит" такая фара. Не просто так у нас техосмотр не пройти даже с просто трещиной в фаре.
@@Paylik1987 Дело не в этом. Вы не поняли мою мысль. Понятно, что вот это на коленке сделанное ненадолго. Я хотел сказать, что у парня руки оттуда растут и при получении доступа к соответствующему инструментарию, он будет творить чудеса.
@@АлексейПавлюк-ш5я было бы желание и почти у каждого получалось бы нечто подобное. Только зачем? Это все равно что разорванную покрышку от авто пытаться восстановить с помощью шила и обувных ниток
@@Paylik1987 и снова не соглашусь. Большинство людей рукожопы в таких делах. Я не говорю, что невозможно научить. Почти любого наверно можно, но по факту людей с золотыми руками не так много. Поэтому они и ценятся в любой сфере деятельности.
My respect for this workmanship. From Australia (we don't repair, we just dump it)
only in pakistan
Привет, почему не ремонтируете?
took him 5 to 6 hours to repair it. how much would you charge for whole day work .. cheaper to buy then new one. that is why we dump them
yes, same here, and it's sickening.
@@samina7670 well in Pakistan the cost of repair is negligible compared to the price of new one .
Much respect to that guy. He knows his craft. We all have to make an honest living.
@Raymond Jimenez thanks for comment, susbcribe for watching more videos
The hands of this Master are gold, respect!
Estas personas son las que realmente hacen que el mundo siga girando. Felicidades y mucho respeto a su trabajo.
NO SEAS WEY!!!
LO QUE HACÉ QUÉ TODA LA GENTE SÉ ACTIVÉ INCLUSO ESTE TRABAJADOR ES ÉL DINERO!!!
CON DINERO BAILA EL PERRO!
"MONEY TALKS"
@@mauriciocampos2192 Es obvio que no entendiste el sentido de mi comentario, y me tomaría tanto tiempo explicártelo de un modo que lo puedas entender que creo no tiene sentido hacerlo. Bye.
what is your language n where do you from?
@@mauriciocampos2192 təəssüf ki sizin kimi axmaq adamlar hələ yer planetində çoxdur.😡
Эти люди творят "дичь"
All that work, and not a single hair out of place. Impressive!
I just learn a new skill ....thank you so much
@Owen Dyer thanks for comment, susbcribe for watching more videos
Given the tools at hand this man did a spectacular job! Excellent attention to detail. Hits in the feels to see this from the usa.
He is fom Pakistan, Not USA.
@@viralmemes8960 OMG... Maybe you should read carefully and really try and understand what people are writing/saying, before applying your professional opinion little friend!!
THE GUY, (JESUS) ARE COMMENTING..... FROM THE U. S. A
@@viralmemes8960 Ha ...Ha.....Ha.. Ya Allah
Молодец! ✊🏽 Хорошая работа👍🏾🇷🇺
Uraaaa 😆
@@gado-gado6183 Urraaa Tovarisch! ✊🏽🤪
@@bulatalexxx2821 love putin🇷🇺 from 🇮🇩
На ваз его, там так же эти повозки делают
@@gado-gado6183 Putin sucks
I love the idea of recycling, I guess in some places it's out of necessity but we generally have become a 'throw away ' society. Very satisfying to see the skills displayed here.
@alan daniels thanks for comment, susbcribe for watching more videos
This is when you get poor, than you find out, you have a brain and hands.. This is what they have to do,.. He whats light, he gets light, but do not ask if this will do a correct light spreading,... But respect to them at all...he solved the problem at there standart...
We? U mean western people.
Ahh that's ok looks ok but im just gonna purchase a new one but thanks for your effort 😮
Skilled and amazing to watch. I have learnt so much from watching these people and applying it to my own problems. Well-done to all street repair specialist!.
@Tony Quinn thanks for comment, susbcribe for watching more videos
Молодец. Эта фара не стоит этих трудов. Руки золотые.
Excellent job repairing that head light. look brand new nice job with the cut could not see it at the end super professional job.👍
7
Probaly all that time, materials, labor and effort for a $10 Fee
@@jc9240 coz you Re a lazy man))))
Ғ еңгә ң генә ғғғгггггғггғ
@@jc92400
Raggungere questo risultato con pochi attrezzi è un miracolo….bravissimo.😀
He is AMAZING and men in America would give anything to be as talented as him and have his beautiful full head of hair !
Felicitaciones señor. Es un trabajo de mucho esfuerzo e inteligencia. Reparar ese faro, con poca tecnología, es digno de respeto y admiración.
y esto si es reciclar no como los monguis que piensan que comprando un nuevo coche electrico ayudan al m.ambiente
@Julio Araya thanks for comment susbcribe for watching more videos
Merece todo respeito do mundo com as ferramentas que ele possui fez uma restauração do farol perfeitamente...um abraço do Brasil....
absolutamente de acuerdo, instrumentos del siglo XVIII Bravo 👍👍👍
Может он к съемкам приоделся☺️.
Imagine se ele tivesse o ferramental adequado. Se eu estivesse lá eu daria as ferramentas para ele, porque por lá tudo é muito difícil
Ótimo trabalho, muito honesto e feito com dedicação. Saudações do Brasil.
His job is amazing. Watching it feels like a therapy. I appreciate his hardworking outcome.
If you offered him a visa to America he'd be outta there at light speed
Nah , he would prefer to go to China , not every ONE is a big fan of IGNORANCE !!!
Руки золотые у вас. Поздравление и здоровья вам и близким 🤲
Больше всего здесь восхищает скромность и немногословность Мастера..Отличная работа
что же отличного , каменный век , но даже они способны делать свои машины !
Чтстый, красывый, вымытый, с прической на стиле. Джыми джыми ача ача мечта Гиты какой-то..
@@kolkoly4 каменный век у нас..нам до них как до звезды))
@@stasmasloff27 да нас тоже в каменный век загнали но по сути они просто используют старые совковые технологии и даже их у нас путерасты украли ,я смотрел как тут генераторы делают я так же делал в 2002 году на стажировке !
@@stasmasloff27 и ты правда думаешь что фара с зеркальной пленкой будет светить хорошо ? могли бы хотябы снять кротом хром и сделать его по новой химическим нанесением все реактивы можно найти!
Gotta appreciate the hard tedious work by these men 👍🏼
Craftsman for sure
Europe's garages are just replacing but no more repairing. Such skill is entirely lost. Really admire what this guy can do with minimal tools and even keeps his clothing clean while working.
@@PeterKupietz No reason why we can't replace the outer lens (if available) but "fixing" plastic like that, especially with LED or HID is a no no, the optics are too critical to consider doing it. Nice work though when choices are limited!
сппаеппс
@@hoojchoons2258 not only that but once taking apart getting the lens sealed all the way requires more the just warming it up and clamping together so that headlight is no longer water tight , they actually recommend using an adhesive as well when changing the lens , me and my dad changed the lens on his vw from plastic to glass lenses because the plastic turned yellow and white and cost more the the glass lenses
This is not a real repair this is a temporary I can't buy a new one or go to a junkyard and get one if you ever disassembled headlights and rebuilt them or modified them you would know that the inside is not 10 for like what he has here it's a extremely highly reflective paint Metalized paint so don't think that this is a good job that thing will barely be bright enough to light the streets you wouldn't be legally allowed to drive with these in any country other than a third world country also with all the debris chemicals and everything going into those drains and just going into the ground that would be against most laws from the EPA
Até cheguei a duvidar se a peça final realmente se tratava do mesmo farol, mas sim dá pra ver a emenda de uma forma muito sutil. Incrível! 👏👏👏👏👏
Queria saber que adesivo refletivo foi aquele que ele colocou na parábola que aguenta tanto calor gerado pela lâmpada. Tô com meu farol aberto só esperando isso. Ela.tb tá queimada como a dele tava.
@@samaranc2008 amigo existe um tipo de adesivo que dá pra usar, chama speed tape usada em aviões, é uma fita aluminizada que eu ganhei de um amigo que trabalha com helicóptero, mas tem a venda no mercadolivre
También le dejo la pequeña mancha de pintura azul... Ahora con tu duda, supongo que fue al propósito para que se corroborará que era la misma pieza que empezó a arreglar y no la cambio por otra pieza que estuviera en buenas condiciones. . saludos
@@samaranc2008 colocou a fita refletiva pois não existe nenhuma tinta “cromada” que fique realmente igual ao cromo original… Todas essas tintas que existem por ai acaba ficando “fosca” como se fosse um spray prato comum.
Nesse caso, ele usou a fita refletiva pra manter a funcionalidade do farol de iluminar, de refletir a luz… O mais correto seria fazer o “cromo” em si, que na verdade chama-se aspersão química (é diferente do cromo em metal, e poucas pessoas fazem)
Realmente ele se esforçou muito e o resultado final é muito bom. Rapaz trabalhador pra caramba! Olha o semblante simples dele no final...
انت انسان فنان وتحب عملك
نرفع لك القبعة احتراما سيدى 👍👍👍🙏🙏🙏
This light would definitely be scrapped in the UK & I doubt anyone could fix it, let alone fix it to a high standard and you can’t even tell if it’s been repaired!
WOW! 👏👏👏 Ma’sha’llah 👌
No one would bother fixing it, the labour involved would outweigh the cost of a new headlight more than likely, not to mention the fact that you can very much tell it has been repaired, can easily see the patch that has been added, this would also more than likely fail an mot due to distorting the beam pattern.
There's a reason this isn't done in the UK 👍
Put it through a uk winter , it will cloud up it will b very hard it seal that lens
@@TheWildPikey Yeah just like the all the 'clean' accident damaged cars going around 😂 I promise you alteast 90% of people would never clock it's been repaired. You only know because you've seen the work been done. These lights are from the 80s maybe 90s also so this repair would only make them better 😂
In India also it would have been scrapped
@@nahmed92 accident damage repairs are an entirely different topic which I wasn't talking about and actually I can clearly see it so whether or not I'd seen it being repaired I would see that and if someone didn't see it then it would still fail an mot!
Absolutely amazing, I truly admire you for the creative job you did to restore those headlights.
May God bless you my friend !
😊👍
@Daniel B thanks for comment, susbcribe for watching more videos
Love how u fix thing instead of replacing with a new item, we should all take note
I'm with you on this!
He "fix" things cos all his country can't afford to replace new one :)
@@panswiniowaz482 phuckyou
If you lives in a western country, you will pay more for the repair than the cost of a new one.
Q
بارك الله فيكم وجزاكم الله خيرا على هذه الأعمال المتميزة المتقنة، لو كان لنا فنيون مثلكم في الجزائر 🇩🇿،
Joder,que humildad,con cuatro cosas y a usar otra vez , eso si es ser mecánico (ser capaz de reparar) no cambiar piezas viejas por nuevas !! Gran trabajo
B
Witam pozdrowienia z Polski.jak widać potrzeba matką wynalazców
Ese trabajo le sale mas caro , por las condiciones encima esta muy expuestos a accidentes y esta respirando gases que le pueden dar cancer .
Claro no digo que te moriras por una vez respirar eso , pero a diario y por años ya es peligroso
These lights not available new coz old cars so these craftsmen do the job
Very impressed - excellent work ethic with minimal tools and great result ! 👍🏻
Что поражает какой опрятный чистый вид у "умельца" по починки фары.
Тоже заметил
Зато качество работы 👎
@@Сергеймарченко-ж2о чел за 300р полдня пыхтел, имейте совесть
@@Сергеймарченко-ж2о ссылку скинь на свою работу, эксперт
@@Сергеймарченко-ж2о а что ты понимаешь в этом, знаток?
Excellent job. I've only ever popped open these types of lights to replace the lenses with new ones. This is a great and economical way to repair these.
Não importa qual é o seu trabalho, faça-o como se dele dependesse o mundo. 👍🏼🇧🇷🌿
Not for 5$
That's more rare than unobtainium
Plz share the address
@JP Pedro thanks for comment, susbcribe for watching more videos
Perfect work. No Brasil o rapaz ganharia muito dinheiro.
That's a lot of work! Looks great 👍
De verdad que es un maestro este artesano. Un trabajo digno que debe valorarse no por lo que cuesta, sino ponlo que vale una mano de obra tan calificada.
Отлично сделано, насколько возможно восстановить фару, так он это сделал на 100℅ учитывая технологию гаража. Если бы ещё научились хромировать пластик, то цены бы не было.
А чем он отражатель клеил. Что за плёнку использовал.?
@@hikkrivtsov2852 не знаю. Возможно она "поплывёт" от нагрева, потому и писал про хром.
@@АлексейЮсупов-ю5ы когда то в студенческие годы востанавливал такой плёнкой (оракал самоклеющийся) фары на "Оке", отражатель внешне там такой же. Год продержалось и не поплыло
@@АнтонЮдин-о9в потому и говорю, что возможно поплывёт. )))
@@АлексейЮсупов-ю5ы за $5 очень даже нормально
Adam tam bir usta,
Allah kazancını bereketli yuvasını huzurlu eylesin.
İşini bitirdigindeki bakışı da hiç kibirli değil maşallah
Tarkey 🦃
@@NewStateCommunityLeader st*pid 😋
Excellent job, I highly appreciate his hard work and devotion.
Что я могу сказать? Очень красивая работа. Молодец.
Молодец ! Отличная работа! Лайк + подписка!
Для настольной лампы да, для авто полный брак!
В таких суровых условиях ,а результат огонь
Ну так пока новая едет то да...посмотрел на свою машину б.у фара 15 ка и то уже думаешь а почему бы и нет🤣...
Их 1,5 миллиарда. Если будет не огонь-казнь
What an amazing job he is doing. Takes my breath away such skill it's really a lesson in hard work.
acha bsdk
Dios bendiga tu negocio hombre👏
Хром на отражателе сгорел, ни одной пленкой не заменить его, лично проверял все варианты, чисто для красоты наклеили.
Полировка на пару месяцев, нужна пленка или лак, а учитывая сколько они пластика срезают, это точно одноразовый ремонт))
Это не плёнка а ремонтная амальгама используется при ремонте зеркал. на 100% конечно не восстановит но % на 60-70 будет лучше. и пластика он счищает мало совсем. у нас наждачкой при полировке удаляют больше. Конечно лаком надо покрыть для защиты это да. А так для таких условий работы это вообще прекрасный ремонт.
Алюминиевый скотч с последующей полировкой его в зеркало, на какое то время помогает. У них видимо денег на новые фары нет, вот и крутятся как могут, молодцы ребята
@@ВалерийГрибурьев будто у нас есть деньги на новые фары. Ставим диодные линзы да радуемся хоть этому.
@@АлексейЮсупов-ю5ы диодные линзы тоже не все могут себе позволить. Поставил биксеноновые с галогенками, шторку дальнего подключил через пятиконтактное реле. Вот буквально вчера поменял поворотник передний, после дтп заменил на нем стекляшку на прозрачный пластик рекламный (пэт), год с ним проездил, пока новый не купил
@@АлексейЮсупов-ю5ы на лед линзы тоже нужны деньги хорошие 15к стоят а лампы лед хорошие в Приору чтоб не слепить 3500 отдал в прошлом году.
This young man is very skilled, he can fix anything!
Nice technique. I had to do this myself because a new headlight was $400 and I wanted to take a chance. I used epoxy resin but the same idea. You can also use toothpaste as a buffing compound to polish the lens.
Toothpaste is too expensive...sand and water!
Toe crust and water
Wow.. video anda sudah saya tonton. Saya dari Indonesia, saya sangat kagum dengan pekerjaan anda.
Parabéns, sem ferramentas consegue fazer esse belo trabalho, imagina se tivesse as ferramentas certas. Parabéns
@CíceroJr thanks for comment, susbcribe for watching more videos
Золотые руки, молодец 👍👍👍
На ладе заводе работал раньше
É um artista! Muito habilidoso! Parabéns.
@WastonRibeiro thanks for comment, susbcribe for watching more videos
Excellent repair!!! I couldn't even find the piece that was stuck into place!!! Minimal tools, great skill!!!
Maybe as the video is fake? Maybe this is why you cannot find the piece :)
You're a genius! Really great job my friend!!!
Труд восхищает! Молодец.
This beautiful and wonderful work came after a great effort preceded by the idea of achievement Well done your Iraqi brother
You are the best. One day, the big companies are going to have you do their fine finishing work; just watch.
Serviço de primeira, a emenda fica quase que imperceptível parece novo o farol. 👏👏👏
This guy is very skilled in repairing things that are thrown to the garbage where I live (Austria). Respect & Thanks for giving insight to this amazing technique 👍
El 99.99% de las personas JAMÁS notarían que está reparado. Excelente trabajo! 👏🏼
انها العزم والقدرة على مواكبة التطور وان هذا البلد رغم قلة الموارد الا انهم فعلا اجادوا ما اردوا وياليت باقي الحكومات تدعم مثل هاولاء المهنين والحرفين فهم تاج البلد وخذا فعلا نقلةللتقنية وان كانت يدوية الا انها قمة وجودة
Если будут смотреть зыкрытыми глазами, тогда да!
@@ЩербаковСергей-э8л во во точно !!!
¿99,99% de ceguera?
Si el faro no está PERFECTAMENTE sellado, se empañará...
Además, sólo pulir es malo porque no hay más protección contra los rayos UV.
99,99 % d'aveugles ?
Si le phare n'est pas PARFAITEMENT hermétique, il va y avoir de la buée ...
De plus, le simple polissage est mauvais car il n'y a plus de protection anti UV
Fantastic work! We need a professional like that here in Houston! Great Job!
People won't pay the hours involved to accomplish something like this in the USA.. it will be cheaper to buy new.
Lend him a work visa from Pakistan to huosten
this repair will cost 1/6th of new part
Super attention to detail! A job very well done and a skill we could do with here in the UK 🇬🇧 🏅🏅
Not it's not, it will affect the beam pattern of the headlight and fail an MOT.
Excelente trabajo, todo un artista sin necesidad de tanta tecnología y maquinaria para hacerlo bien, felicidades ala persona que lo reparo
احب جداً من يقوم باصلاح الاشياء اكثر من يبدلها بجديدة انه فنان بذات ان كان متقن للعمل ،،
تحيه لهذا الرجل الفنان
Respect. Skill level legendary. Imagine what he can do with machines worth thousands..
На днях сколы на кузове красил, лакировал, шлифовал, полировал... Так вот он фару аккуратнее сделал..
@@davkras1942 Народ фуфло хавает.
@@davkras1942 вы слепые что-ли, на 17:21 посмотрите видно же заплатку.
@@russia03 и что? Сделано то все равно аккуратно. Или что ты хотел за пять долларов?
@@pga370 вообще-то я отвечал тому кто написал, что в конце другую фару подставили, они не увидели заплатку