The amiga 4000 of im not touching this
Вставка
- Опубліковано 6 тра 2024
- E492 - Mr Dom sends in a 4000 for some recap and ram sockets. what was thought to be neutralized acids turn out to be a doozy. so much so it turns into a re amiga .
Its Dangerous to go alone, take this!
be sure to check out Retro Rewind for all your Commodore goodies and services at www.retrorewind.ca
you can use my code NOCODE, to save up to an additional 15% off your next order. must be signed in for code to work Thanks everyone!!!
Like , Comment, Subscribe or support,
If you would like to help me keep this going, consider supporting my channel , either through patreon for as little as 1$ a month,
/ chrisedwardsrestoration
Or a one time Paypal donation at paypal.me/macphreak4evr you should see a irish captain picard. holding a green beer.
(you will see)
Thank you to all my current patrons and supporters, I can not express how much your support means to me.Because of you and your support and generosity, I am able to fund repairs for others FOR FREE. I can not fix everything, but i do save many. So a personal thanks directly to each and every one of you!
Tools used in this video:
Tonya - a hammer
Aven Desoldering Wick
www.mouser.com/ProductDetail/...
Jonard IC extractor
www.amazon.com/Jonard-EX-2-Ex...
BackBit Chiptester pro v2
store.backbit.io/product/chip...
DIP Pin Straightener
retrorewind.ca/dip-chip-strai...
Helmet of Goober:
www.amazon.com/Headband-Magni...
Solder station WepTools 853d-5AII
www.weptools.com/products/853...
Desoldering station WepTools 948d3
www.weptools.com/products/948...
Fume Extractor: Weptools 948DQ
www.weptools.com/products/948...
Siglent SDS1052DL digital oscilloscope
www.amazon.com/Siglent-Techno...
Kotto silicon solder sucker aka Moana3
www.ebay.com/itm/203339405333
TV pixel display and wall pixel display
www.divoom.com
like the wall neon? get it here
www.retroledsigns.com - Наука та технологія
I watched a lot of these videos and I have come to believe over half of the people sending for repairs are flat out lying.
I waited so long for that roaster chip to come out and it never did. I bought the opal vision because of that chip the Flicker fixer abilities it was going to offer. I actually blew up my opalvision by hot plugging the VGA output on it so be careful! avoid hot plugging the output on Opal vision cards, everyone!!
Loved the OpalVision board and software! 💖 Back in 1990-96 I got to teach computer art, graphics and (Lightwave) 3d as an adjunct instructor at the respected Atlanta College of Art. OpalVision was a key to keeping the Amiga lab alive for a few bonus years by convincing them to invest in several A3k systems with OpalVision cards, and a Raptor render engine. I networked the lab with Enlan and programmed a render queue for sharing the Raptor. Final piece to the puzzle was a single frame video animation recorder. I might have been able to keep the lab viable even longer if the OpalVision Roaster chip had materialized -- I saw the Roaster features impressively demo'd at the '92 NAB show in Vegas, but the (Aussie) product didn't make it to release before the demise of Commodore. (PS: 1 or 2 OpalVision cards will be in the care package I'll be sending you this summer, Chris).
That was painfull to see & no way it worked before...guess dude was hoping for more than a few miracles🤷♂️
A ReAmiga 4000 candidate I guess
Nightmare lol! I would be tempted to have a go at it, but it would take a good 60 hours as you say, and a lot of wires. If you were charging a cheap $30 per hour, at 60 hours that's like $1800.... It's better to get that re-amiga'd for sure.
I so enjoy your videos and personality. I wish I could do what you do. Thanks for being so awesome!
Pick your battles! As before, there are machines that are just organ donors without super heroic measures. Glad you know when to say when! 👍🙂
Well Today, I and others have learned from this video. Don’t lie to Dr Chris…This is what happens when you do 😔 Looks like a Chancer trying a complete fix my board. 🙄 Liked the “That’s not a knife”. 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Hi Chris. Sometimes can we not do a repair like we want. Sucks. Keep up the good job. Now iam working on a Amiga 600. Greetings from Steven from the Netherlands.
Hobbies are fun, that doesn't look like fun. At least you saved the brain. I would love to do a remake of the A2000. Take care.
Good for you for pulling the pin early. Might be time to get detailed pictures before people send stuff in to you?
Looks like someone bagged on of Ripley's bad guys. That's definitely a donor at best and even then it will be fingers crossed with some of the chipset.
LOL, Always cut away from you,,, LMFAO
The amiga 4000 board look like some 286, 386, 486 boards that I repaired to make the boards worked. The owner may buy amiga 4000 circuit boards and use some parts from the old board.
another eBay special, not seen a board that bad in a long while
"Powers up"
Oh no! I recapped my 3640 last year, but followed the silk screen :(
As I recall the A3640 boards had a lot of odd bits, like the version 3.0 -> 3.1 -> 3.2 , I believe the 3.0->3.1 was a must have change though and could be a minor field mod.
Ouch!
I was going to suggest you ran into the issue of the kickstart image not coming up with 3.2 unless you have a floppy drive connected to the motherboard... but then I got to the point in the video where you zoomed in and showed the extent of the Varta Vengeance.
Take the donation anyways. Your time is still worth it and lets be honest, it is not a real payment anyways.
I cant do that.
So Chris, if I get a bag of copper and fibreglass filings and some Amiga chips and you cant build me an A4000. 😅
Perfect candidate for a heart transplant surgery to a brand new ACILL 4k or Chuck ReAmiga 4k board!
I see Paul built a new board. Thats great. He built my A4K board. You cannot save them all.
yes i sent him to Paul and Kavanoz. it was reborn as a new Phoenix.
That machine needs a transplant. no discussion. even if putting 80hours to repair it. it will fail even more later anyway
Keep watching it was re amiga’d by Paul
and oh I can feel the smell already. batterygukk have its special smell.. uhhuhuh
From mass a chew sets? From the Bee Gees?
So… I’m never going to get my 4000 board fixed… that board looks pristine next to mine…
reach out to paul and kavanoz, they can do your re 4000 board.
Its DEAD, let it go, Regarding the Roaster, it never came out, except for some prototypes I saw, I used to work with Bob Downs, (Strangely the Butt of Jokes about his name @ Work) 1 of the OpalVision People, I still have mine, without the Chip ...
Boards trash. Good call
Are you able to repair my spine and cartilage... And my hair loss and my eye sight?
Maybe install some high quality Japanese caps on my knees..
Yikes.
Sad
He lied.
Unknown i am a honest person and take people at their word.
Gets to the insert floppy 💾 screen? Seriously?