Great idea but I used a utility knife heat it up with a candle that will give you so much better cut quit and easier , sharp too , then i used clear silicone to seal all the way around then drill many holes as you want and tight them up with screw., washers nuts … but Thanks a lot for your idea sir
If you cut it above where the water comes out(in back) I don't think you would need to worry about it. Cut it at top run hose to the bottom under some rocks is what im doing.
Use a holes saw. You need a perfect circle and bulkhead fitting and it's not hard. Even if it leaks just seal with pure silicone and let it cure 24 hours
Could you please show where the pump is placed? Also the water pole box can Or should be the filtration system as well right? You really showed nothing except cutting a hole in a storage tub and left out all of the important steps to a waterfall.
The pond looks great.
Not a bad build at all. Well done
Omg omg omg well done u r a genius x
1 inch on bottom of box or top? Could you please show what pump you used? Thank you
Awesome idea, using the tote box for the pump reservoir. What about on the bottom where the pool (catch basin) is, what did you use down there?
This feature came out great!!!
Great idea but I used a utility knife heat it up with a candle that will give you so much better cut quit and easier , sharp too , then i used clear silicone to seal all the way around then drill many holes as you want and tight them up with screw., washers nuts … but
Thanks a lot for your idea sir
Can you provide a list of things needed? We do have the torch.
This like a bunch of fun. Nice my husband just got his plastic welder
I don’t understand !! How to pump goes in and where? X
That’s fantastic wel, done
Once he pulled out the torch budget was burned
Torch is like $35.
nah I just got one for melting driveway material - Think with canister it was 40 bucks.
How is it budget friendly if you don't have all those tools ?
If you don't have any tools then why are you watching DIY videos. Invest in tools before a water feature lol.
Maybe watch a DIY tools video😅
thankyo very much
Getting a hose to run through a plastic box and - seal it properly - is the hardest part of the build - and he/she doesn't show it?!! Cmon
1: cut a hole
2: insert hose
3: silicone
Cut and install a bulkhead. That's beyond easy
If you cut it above where the water comes out(in back) I don't think you would need to worry about it. Cut it at top run hose to the bottom under some rocks is what im doing.
Use a holes saw. You need a perfect circle and bulkhead fitting and it's not hard. Even if it leaks just seal with pure silicone and let it cure 24 hours
This fucking guy! Bud did you watch the video?
7 min of a dude cutting a plastic tub with an exacto knife.
What useless content.
Could you please show where the pump is placed? Also the water pole box can Or should be the filtration system as well right? You really showed nothing except cutting a hole in a storage tub and left out all of the important steps to a waterfall.
ｐｒｏｍｏｓｍ