Restoration Old Rusty SAW - Parts are RUSTED FOREVER!
Вставка
- Опубліковано 10 лют 2025
- Hi! Today, the restoration of an old rusty saw. I bought it at a flea market, initially I liked the old bolts, then I saw it. The condition is terrible, but well, let's start the restoration.
I've been trying to disassemble the handle for a week! But the bolts just rusted completely. I had to break the rotten handle and throw it away. The saw blade was cleaned with a rust remover, an iron brush and sandpaper.
According to the form of the old one, I made a new handle in the program and printed it on paper. I cut it out and glued it to the wood. Having carved the handle out of wood, he treated it, soaked it with oil and wax. I also changed the color with a stain.
The saw blade was corrected, the teeth were adjusted and sharpened. I used new hidden bolts for fastening. After work, I conducted a test for you as usual. Don't forget to share this video, please.
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #saw #restoration
Don't miss Indian Katar restoration! ua-cam.com/video/EQWz1Fottqs/v-deo.html
07:14 You are very skillful to create a new handle for an old saw, 1 like from me
@@CreatorTips.007you have to be careful about the election results have to go back and get to go home to be a little bit to be careful about the same time zone is south Korea and get the election and I can do the same time zo byne is new
Спасибо, Алекс! Ваше стремление подарить вторую жизнь практически убитому артефакту, восхищает и вдохновляет. Не останавливайтесь, ваше мастерство и способ подачи информации растет ( посмотрел старые видео)! Жду продолжение. Удачи!
Спасибо большое!
Beautiful job!!!! I love how you put so much work into making the wood look so aged- and it always truly does look authentically old and vintage!! 🤩🥳 You are my favorite UA-camr!!! I LOVE your videos!!!
Full beep beep!!! 🥔🥔🥔
Thank you so much !!!!
Great job ! About two years ago, I restored a similar saw. The handle was broken in eight pieces and held together by wire, tape, etc. I thought about how important that saw must have been to someone to make the effort to hold it together for "One More Day". I decided to take the time to restore that handle as well. Great feeling to save some history .
very simplistic and thorough restoration from start to finish without sacrificing the vintage appearance.
This was a brave restoration, but really leaves the saw more of an ornament. I have sharpened saws for more years than I care to count and have refused any that were rusty. The corrosion weakens the steel, especially the teeth which have a tendency to break off when using a setting tool. As for the debate about fast and slow sawing, the correct method is to hold the saw at approximately 40 degrees to the work surface and apply a small downward pressure as the saw is pushed through the timber. Cutting at a moderate rate allows for greater accuracy with the cut, this is a carpentry tool not a sledge hammer. In addition to the lack of accuracy when sawing like the clappers, it is exhausting plus the saw becomes very hot along the teeth, not hot enough to 'soften' the steel, but unequal heat on the whole of the blade width can cause distortion ultimately making it difficult to push through the timber. My maxim when teaching sawing of any material be it timber, metal or plastic, is slow, steady and accurate. The saw being restored is a panel saw designed for cutting sheets and boards of timber, not logs and branches, the right tool for the job saves time and energy.
Thank you very much for the detailed and useful information!
Приятно смотреть, как старые и забытые вещи возвращаются к жизни😊
Hello Alex, great restoration! I don't think I've seen seen a handsaw restoration before! Beautiful work, I especially like the handle! Thanks for another great video! All the very best to You and Yours from Brian in Southern California
Thank you Brian!!! ^_^
Я вот смотрел когда ты мучился с ручкой пилы,думал когда же ты её просто сломаешь 😅 лайкос за видос 👍😁
Great restoration, especially when I grunted alongside you in removing those tough bolts. They were completely stuck.
Thanks)
Всегда радует, когда инструментам дают вторую жизнь...
Отличная реставрация, отличный видос. Бип бип без дела не сидит. А ножны не помешали бы. Лайк мастеру на все руки.
Когда Алекс достал доски, я подумал он сейчас будет делать свои любимые ножны как для кинжала 😂
хаха))) вот сегодня комментарии смешные))
Класс! Молодец! Эти ножовки новодельным ещё фору дадут!)
Вернул к жизни почти утерянный инструмент. 😊😊😊
Лайк.
Спасибо!
@@ScrewsAndTools Пожалуйста.
Fantastic restoration of a simply little tool, respect from here in the UK.
Turned out great. Never let a screw hold you back. You win
Thank you!
NO WAY
Great work ! I'm glad to see you do something other than a knife or sword.
Great job! I have a saw just like that, passed down from my grandfather. It's my favorite.
Thank you! I also have some very simple tools that were left over from my grandfather (
Tuff screws, excellent work incredible patience thanks for saw rescue.
An exhausting process but another project well done ❤
I liked the preservation of History 😊 ❤
I too have many such tools used by my Grandfather, but I do not renovate them, to preserve their original forms.
As always, your end result was great. The makeshift tooth set was neat. But it caused me emotional distress to see the original handle destroyed.
If he didn’t get that handle off we probably would’ve had a different restoration video. Lol
I enjoyed the Benjamin Buttons resurrection on the saw. Good job; we appreciate your effort. 🫡
Super good job 👏 👍 👌,
Hello from the Russia 👍 🎉😊
Congratulations on the resetting and sharpening, it's not easy.
Крутяк! Обожаю когда у тебя на реставрации инструменты! Отличная работа, Алекс! P.S.: Если не воспользуешься ей в следующем видео, буду считать реставрацию постановочной и заберу все лайки назад!(Шутка 😂)
P.P.S. Включать субтитры на кнопку [cc] в верхнем правом углу!!!!
На нее уже приятель положил глаз мол, пока она у меня)
И да в новом проекте уже использую) думаю будет или на этой или скорее в следующей недельки
Oh now I am not looking forward to the collecting of saws I have that need restoring so they can once again be used... such a painful reminder lol. Very nice job !!!
the way you do it is great a lot of lessons i learned
Здравствуйте и процветайте Алекс! Я вот сразу подумал деревяшку учше сломать. Ножовка ещё будет пилить свое дерево теперь. Все хотел спросить, а ножны для ножовки, 😂 так ручная пила у нас называется.
Дал вторую жизнь. Мое уважение 💥
Excelente, con complicaciones cómo en la vida real,te felicito!
Молодец мужик ножовка получилась что надо ❤❤❤
Очень хорошая ржавчина 👍 бип бип!
Спасибо)
Да как я умудряюсь видео то пропускать? 😡. Привет Алекс хорошая работа как всегда😊
Привет, да в наше время порой покушать я забываю)))
Süper work brother ❤
Good job mister Screws beautiful restoration well done
Спасибо! Круто, как всегда! Жаль, проверки на тыкве не было😂😂😂!)
гыгы))
Алекс, зрители требуют ножны и подвес на пояс!!!😉
Еще и фурнитуру из мельхиора))))
@@ScrewsAndTools 😅👍👍👍
Как всегда: упорно, кропотливо, вручную и до победного "Опосля" 👍💪
P.S. Странно, что ручка не похожа на рукоять кинжала 🤭 и где ножны? 😂🤗
)))) я ожидал такие комментарии, но не в таком количестве)))))
Nice job all saws need a second chance, had to laugh when you stored it next to the modern ones with plastic handles, nice video as always Alex
This is the first time I've done such a restoration)
Как всегда интересно👍
Спасибо!
Молодец, нужный инструмент в хозяйстве и не надо ничего придумывать. БИБИП всё супер.
Спасибо!
Amazing as always. Love your work
Алекс, порадовал , сколько мучений!!!! Возможно тебе помогла бы ударная отвертка
Hey man, if you want fast times on making your handles, after cutting to size you can use a spoke shaver to help your edges much easier than a draw knife. The draw knife was cool, but to save on sanding time I would just rough out the shape with a spoke shaver, there are tons of vids on that here on UA-cam, great restoration tho!
Доброго времени суток, Алекс! Этой ножовке наверно не меньше лет пятидесяти, а то и шестидесяти... Надо было рукоять сразу раскалывать, не мучаться с болтами. Главное, само полотно в нормальном состоянии, особенно после чистки, заточки и разводке зубьев (каждый зуб заточить и развести... 😐) вообще отличное стало. 👍 Если честно, никогда не пилил тутовник, не думал что тутовая древесина такая плотная... Хотя ножовка и её взяла. Надеюсь, не сильно зубья затупились? Один вопрос - много уже банок с ржавчиной для истории набралось? 😉
Super jest to odrestaurowane pozdrawiam serdecznie 👍👍👍👍👍👍
So satisfying therapy 🤤👌
Thanks!
I absolutely loved it that was a cool restoration
My father was a Saw Smith. I would offer you two points to consider. Lose the WD-40; it's way over-rated for loosening stuff. The "WD" stands for "Water Displacing" and the "40" indicates the 40th attempt at success. Use an actual penetrating oil and be patient. If they are so corroded this penetrant plus heat and some hammer impact while trying to turn the screws didn't work, I would have cut them off or drilled them out as well. You may not be aware, but there are such things as "saw set pliers". How you made the set was great and my Dad taght me a similar technique, but those pliers are way faster and can be used on a variety of blade styles and tooth sizes. Correcting the set only matters if the teeth are a unifirm height. I use a knife-blade style or triangle file for sharpening. Nice job overall. Cheers from an old guy.
Greetings to you! Thank you so much for your attention, interest, advice and a little story.
Thank you Sir. Useful, will help me.🎉
Thanks and welcome ^^
Привет, дорогой бибип из Германии, хорошая работа, но не очень острая,
Привет, эта пила оказалась для реза по прямой а не поперек
@@ScrewsAndTools О, это интересно, но кроме напильника и пиления ничего делать нельзя, у бензопил есть еще и дополнительные цепи для продольных распилов
Саша, отличная ножовка. Заточить бы её вдумчиво и не торопясь. И будет тебе инструмент для чистого реза.
Открой мне тайну, зачем ты в течении недели пытался открутить гнилую ручку? )))
Мне, например, сразу было видно, что рукоятку ты всё равно будешь делать новую. Ну, старая деревяшка, она и в Африке старая. Винты, даже если бы ты их отвернул, так всё равно под замену. Скажу честно: ты хороший мастер, но повеселился я от души)))
Кстати, с хорошим алмазным напильничком из этой пилы вообще конфетку можно сделать.
Добрый день! Вот впервые такое сделал. А рукоять я хотел сохранить, пропитать клеем\смолой, зашпаклевать, отшлифовать, пропитать и тд. тп.. Но увы болты подвели. Вот. А про алмазные напильники поищу - не слыхал доселе. Спасибо за внимание.
@@ScrewsAndTools Ага, идея понятна. Если ты покопаешь свою почту, то есть вероятность, что найдёшь письмо, где я писал про стабилизацию древесины. Если не найдёшь - дай знать, распишу процесс по этапам.
У деда была ножовка с такой рукоятью, но полотно с традиционной советской геометрией зубьев. К сожалению, не сохранилась(
А тëзке традиционно лайк!
Nice work ❤
Thakn you!
АЛЕКС ВЕЛИКОЛЕПНО 👍👍👍👍👍💪💪💪
Спасибо за видео, друг!
Все, кинжалы, шашки, шпаги, мачете, и топоры Алекс уже отреставрировал, пришел черед ножовкам!
Хочу чуть-чуть разнообразить. И кстати, доселе не было ножовок
@@ScrewsAndTools а ручку пилы ещё можно было спасти или нет ?
@@НикитаАкимов-ф8с Без вариантов)
Sorry I don't read English!! 🤔😂Well done my friend...
Good job, but isn´t it cheaper to buy a new saw ? 😄
Thanks! But it's the easiest thing to buy. And I'm not looking for easy ways)
болты можно было маленько обстучать и засунуть целиком в соляру.Ручка из клееной доски(со временем по стыку треснет)и главное,не заточили....)))
А так,хорошая работа.👍
Просто мне постоянно ножовки приносят,ручку сделать или заточить.😁
Советские,сейчас металл ножовок гуано..😵
точу закреплённой болгаркой с 1,25 диском по металлу.
Спасибо за советы и отзыв. Я в первый раз восстановил пилу, а вот про то что она для реза вдоль узнал впервые
@@ScrewsAndTools У поперечных зубья равнобедренным треугольником.
Для ручки обычно тутник использую,мягкие породы дерева недолго служат.
Или вообще 2см фанеру,но её надо обязательно пропитывать.
Заточка нудное дело.Раньше вручную точил,потом плюнул и перешёл на болгарку.))С ней можно точить все ножовки и пилы по дереву,цепные тоже.Кроме самых мелкозубых.
Good work!
Thanks
I guess you could say that I never saw this coming. 😂😂😂
I restored the saw for the first time)
Приятно слышать исконно русские слова, доселе и опосля. Лайк
Спасибо🙏💕
You can use a wrench on your big screwdriver, it May help to apply force and lose the screw. Maybe😅
I always wondered if you'd ever do a saw. I've seen you fix almost every other kind of hand tool. Handle looks much more comfortable 😄. ✨️🪚✨️👍
P.S. My tiny anvil arrived!
Great job! Liked and………………Subscribed. Best wishes from Australia 🇦🇺
Hello and thank you so much!
Эта пила заточена для пиления вдоль волокон, старые пилы без закалки всегда точились либо чтобы пилить вдоль, либо поперек.
Да, вы правы. Я не слышал про это. Для меня на первой взгляд было пила и пила
ბავშვობა გამახსენდა 80 ან წლებში პაპაჩემსაც ჰქონდა ეგეთი ხერხი.❤გორში.
მადლობა ყურადღებისთვის და პატარა ისტორიისთვის.
Great restoration, my friend! Beep! Beep!
Thank you!!
Great job on this saw Alex I know it wore you out
God job...nice video!
thank you!
Хорошая, интересная работа !..😊😅
Для картохи сойдёт 😉👍
привет дружище!!
Приветствую!!!
Just stumbled upon your channel. Been watching a few of your latest videos. I will continue to watch them during my free time. I like your sense of humor. Did you get that from Hand Tool Rescue?
That's a lot of work for a hand saw handle. You did a good job replicating the original one though. Nicely done.
Thank you and welcome. I started doing restoration a long time ago, maybe 10 years ago, but decided to show it only from 2029 seriously and every week
Awesome always cool stuff always thanks
Definitely good enough for potatoes. 😆
))))
you are one of the best thank you
very good video
Уважаю! Мастер! მე პატივს ვცემ! ოსტატი!
i ve got over 100 of them hanging in my garage 10 in a bundle
И тут я подумал, в конце видео автор готовит еду отреставрированными вещами!
Я думал, что бы попилить банан или колбасу))))))
The "rust" is history ;)
YA know, if you put a torch on that old wood handle the hardware will fall right out 😁
Так погоди, а как же защитный чехол для лезвия?😂 небезопасно. Отличная работа как обычно, ну и хорошо, что используешь электроинструмент, очень он все же ускоряет и упрощает процесс
My father had what was once a beautiful disston saw like this but in worse shape the screws all broke and there was no metal beneath the handle anymore and wood was crumbling, however I was determined to save it because it belonged to my dziadziu who was an architect and builder in the 40-60s. He died in 70 I couldn’t just throw it away even if it would be only a decoration I was okay with that prospect although I never met him and barely knew my other Dziadziu I use and work with some of their tools and in a way I carry on the trades that skipped a generation in my family, oddly in the way I inherited the tools I also inherited their skills.
Hello, thank you for your attention and such an interesting warm story. I always read with great interest when the audience writes me their stories. Best wishes
Bip bip ! 🎉
Muito bom 👍
О, вот ещё один инструмент приобрёл вторую жизнь
Мої вітання. Чомусь на дерев'яних руків'ях завжди тяжко відкрутити щось. 😅Гарна як завжди робота тим паче що це щось нове 👍. Але на мою думку, пилка для пилу вздовж, а не поперек волокна.
Спасибі за увагу, та вже написали що це інша пила, але все ж))
Хорошая работа.
Новые стяжки покупные?
Привет, стяжки? На какой минуте?
@@ScrewsAndTools, имею ввиду новые винтовые пары, или соединения.
Very nice work
Hey, you forgot to make the sheath.
Hahaha, oh yes) Im waiting this comment!
А что, хорошая пила из хорошей стали. Не то что современный "китай китайский". Если грамотно развести и наточить зубья, то будет зверь-пила. 👍
Привет, согласен. Мне тут написали, что она не для поперечного оказывается, я даже не знал.
@@ScrewsAndTools А, то есть она для пиления вдоль волокон? Интересно.
When brute force fails, simply apply more brute force.
That's where I came in via breaking the fourth wall. I was grunting alongside you, Alex.
Super bien😊
Besst 2:26 decision ever Alex... it would take forever to pulla out those screws
Молодец!!!!
Мучался неделю , а разобрал за 10 минут , надабыло сразу так😅
Так я хотел эту рукоять восстановить, был план как это сделать, но боты все испортили)
мне кажется , мало развели зубья, по этому так плохо пилилось...
Может быть, но шелковицу пилить рубить всегда сложно
Nice❤❤❤