Thank you for the recommendation to the XK K110. And thanks for your good nature and fun loving attitude. About the XK K110: on one crash, of course the gear came off and the battery a little loose, but when the gear came off the bearing also came out. The bottom bearing just above the main gear. A young friend, a boy, that I was flying with said, " I think this came off too". And handed me the bearing. Putting the XK K110 back together we lost the bearing again. Found it on the tail motor. Without the bearing or the child and I would have had a very bad day. This happen within the first five flights. Pop the bearing in and no problems there after. Waiting for the next purchase. XK K110-B The bind and fly version. THANKS FOR THE RECOMMENDATION. PERFECT DIRECTION TO GO.
Great to see you flying 3d heli again!! it seems like it has been years! your skills will be back in no time! You taught how to fly 3d helis years ago,If it wasn't for your ch I nevr would have learned
i wish we could have only one park for small quads, helis :( nothing more... at least there will be less wind and more fun. nice control ... you're good
I'm glad to see you're enjoying 3D flying again. Do you drive a car? After flying 3D driving a car feels like everything is slow motion.Good excuse to buy more helis, for safety, ya know?
Nice practice flying, Ali. I have one that looks remarkably similar - can hover it inverted, but not confident enough to do anything more yet. Can do a lot more in the Phoenix flight sim software, but smashing and bashing is completely without consequence in a flight sim :D Keep up the good practice - crossed fingers for lighter winds next time. PS: Looks a lot like the WLToys V977! :)
HI any recommendations for a starter 3d micro heli... I already have 2 years experience with quadcopters, and have a turnigy 9xr receiver so would like to use that and not a bundled transmitter receiver... small enough for inside house use but powerful enough for outisde too.... i dont mind building providing its not too expensive
was that all on one battery? certainly orders of durability above my $200+ (all upgrades) V120D02S when it comes to crashes! I get *one*, then its off to the parts box... funny how the sounds of that much larger heli synced up with some of your moves. def time to practice ali, I know you're capable of much more.
i here its preset to 200 meters out the box how make full transmitter range how far can this go please wife ordering me one today spare batterys aswell thanks your channel awesome very helpfull informative etc
maaaaan I suck at 3d flying I've crashed my blade 230s and caused all kinda damage lol but I haven't gave up I'm gonna keep practicing I'm good on a simulator but in real life my 3d flying suck but I've seen you flying 3d really good before bro😀
hi dude ny wife gettibg me the freeX gps quadcopter comes with 2700mah 3s battery do you know max s size and mah it will take dont matter if dont fit inside do mod carry it underneath or one each side like can do with the phantom 1 2 etc should do software uodate and gimbal uograde before calibration etc thanks love your channel
Hi Ali , my English is not perfect , so I use the google translator . I also have the XK K100 . I have a pitch curve from 0 : 25 : 50 : 75 : 100 And a gas curve of 100: 100 : 100: 100: 100 Programmed . My problem is , when fully Postive or Negative Pitch breaks the speed , so that for example at full negative pitch the helicopter flying into the ground ... I hope you can help me. Fly CP Helis only since 2 weeks :)
Yes we will move back to China soon. Which Motor cycle? Honda CBR? I sold it out before moving away. but plan to get a new one when I get back to China :)
Thank you for the recommendation to
the XK K110. And thanks for your good nature and fun loving attitude.
About the XK K110: on one crash, of course the gear came off and the battery a little loose, but when the gear came off the bearing also came out. The bottom bearing just above the main gear. A young friend, a boy, that I was flying with said, " I think this came off too". And handed me the bearing. Putting the XK K110 back together we lost the bearing again. Found it on the tail motor. Without the bearing or the child and I would have had a very bad day. This happen within the first five flights. Pop the bearing in and no problems there after. Waiting for the next purchase.
XK K110-B The bind and fly version. THANKS FOR THE RECOMMENDATION. PERFECT DIRECTION TO GO.
Great to see you flying 3d heli again!! it seems like it has been years! your skills will be back in no time! You taught how to fly 3d helis years ago,If it wasn't for your ch I nevr would have learned
i wish we could have only one park for small quads, helis :(
nothing more... at least there will be less wind and more fun.
nice control ... you're good
I'm glad to see you're enjoying 3D flying again. Do you drive a car? After flying 3D driving a car feels like everything is slow motion.Good excuse to buy more helis, for safety, ya know?
Cool little helicopter buddy and looks like it can take a few crashes.
few? you are underestimating this buddy :D
Well if it was in my hands buddy it would be put to the test as would be eating more soil than a worm chewing soil, than being in the air LOL!!!!!
well thats what they designed them for :D
Nice fly. how do I setup the transmitter kx6 to another helicopter (The original helicopter was lost in the bushes) ?
Nice practice flying, Ali. I have one that looks remarkably similar - can hover it inverted, but not confident enough to do anything more yet. Can do a lot more in the Phoenix flight sim software, but smashing and bashing is completely without consequence in a flight sim :D
Keep up the good practice - crossed fingers for lighter winds next time.
PS:
Looks a lot like the WLToys V977! :)
Keep on going Ali, you make very good videos.
U should do gives way
You should give the blade apache a whirl. lol
HI any recommendations for a starter 3d micro heli... I already have 2 years experience with quadcopters, and have a turnigy 9xr receiver so would like to use that and not a bundled transmitter receiver... small enough for inside house use but powerful enough for outisde too.... i dont mind building providing its not too expensive
Tough little bird !
i like your vids !! nice men !
was that all on one battery? certainly orders of durability above my $200+ (all upgrades) V120D02S when it comes to crashes! I get *one*, then its off to the parts box... funny how the sounds of that much larger heli synced up with some of your moves. def time to practice ali, I know you're capable of much more.
3 batteries
i here its preset to 200 meters out the box how make full transmitter range how far can this go please wife ordering me one today spare batterys aswell thanks your channel awesome very helpfull informative etc
فكره رائعه
Hi there, can you do a video on your remote while you do flip on your heli? Thx alot!!
maaaaan I suck at 3d flying I've crashed my blade 230s and caused all kinda damage lol but I haven't gave up I'm gonna keep practicing I'm good on a simulator but in real life my 3d flying suck but I've seen you flying 3d really good before bro😀
yeah, got out of practice. need to catch up again
good video and wanted to thump up but damm man, that wind was just so irritating to listen too.
hi dude ny wife gettibg me the freeX gps quadcopter comes with 2700mah 3s battery do you know max s size and mah it will take dont matter if dont fit inside do mod carry it underneath or one each side like can do with the phantom 1 2 etc should do software uodate and gimbal uograde before calibration etc thanks love your channel
3S 3000mAh is the max i fit inside
Hi Ali , my English is not perfect , so I use the google translator .
I also have the XK K100 .
I have a pitch curve from 0 : 25 : 50 : 75 : 100
And a gas curve of
100: 100 : 100: 100: 100
Programmed .
My problem is , when fully Postive or Negative Pitch breaks the speed , so that for example at full negative pitch the helicopter flying into the ground ...
I hope you can help me.
Fly CP Helis only since 2 weeks :)
I will try to post a video of my Pitch curves soon
Okay, thanks :)
Best regards from Leverkusen Germany
firsttt great vid
what happen with your trex 600 ?
Sold out long time ago
+alishanmao Why ?
Hi Ali, do you still have your motorcycle? and are you moving back to China?
Yes we will move back to China soon. Which Motor cycle? Honda CBR? I sold it out before moving away. but plan to get a new one when I get back to China :)
Wltoys V977 looks the same. I think they are twins.
XK is a division of WLToys.
I'm pretty sure their different companies.
NELICOPTER No. You can find XK products on WLToys' website. You can also check RcGroups.
Oh. Well that was an interesting move to rebrand their own helicopter then...
They probably used it for an opportunity to revise it.
NELICOPTER Yea, XK is more top tier products for the hobbyist. Not toys.
my first invert in dubaui....................crash lol
I should have added a fart sound on that LOL
Oh you mean a blade fart! :)
hi, what is the price of the helicopter?
ok how about undet like phantom
oldukça hızlı
I had a similar 3D heli, but I ended up crashing it into a lamp post at maximum speed, which snapped the thing in half :(
Tape and glue works :D
alishanmao Well, I don't think tape and glue can repair the severed wired xD. I've still got the thing, and I can probably fix it if I really tried.
+Xenro66 actually, it can. Solder and heat shrink works better, but still.