Replace a True Refrigerator Thermostat GDM-10

Поділитися
Вставка
  • Опубліковано 26 лис 2019
  • I will show you how to replace the Thermostat on a True GDM-10, and where to Order the Thermostat for the Refrigerator.
    The True GDM-10, 12 , and 26 are all very similar, to replace. It is easy to do.

КОМЕНТАРІ • 79

  • @GoFoodservice
    @GoFoodservice 4 роки тому +1

    Mark Bond knows his stuff!

  • @energygirl9588
    @energygirl9588 3 роки тому

    Thank you, I got the part and put it in last night. Working perfectly now!

    • @manko717
      @manko717  3 роки тому

      That is great news. Check out one of my songs on UA-cam, “Love Can Leave Without a Sound”, Mark A. Bond, There are others. Glad it all worked out

    • @frankyanez1604
      @frankyanez1604 2 роки тому

      @Energy Girl where did you the thermostat from and what pricing?

    • @energygirl9588
      @energygirl9588 2 роки тому +1

      @@frankyanez1604 Amazon and $40.00

  • @PhillipLandmeier
    @PhillipLandmeier Рік тому

    Very nice video. It's all you need to know. Thanks for posting it.
    I maintain an older True model T-23G and your tutorial applies to that model as well.

    • @manko717
      @manko717  Рік тому +1

      Thank you. Hope it helps people

    • @PhillipLandmeier
      @PhillipLandmeier Рік тому

      @@manko717 Judging from the comments, it certainly does help. Plus, only a fraction of the people you've helped leave a comment.

  • @remix6636
    @remix6636 3 роки тому

    Thanks for this video.

    • @manko717
      @manko717  3 роки тому

      Were you able to get your job done. True and Beverage Air are similar, in access to the thermostat, in top of the drink compartment. The pigtail will only go in so far, sometimes. You do the best you can. It helps to have someone with a small hand.

  • @user-el9kp7yk2o
    @user-el9kp7yk2o 3 роки тому

    Very good

  • @tastyjamstudios
    @tastyjamstudios Рік тому +2

    did you put the putty back ? i didn't see it

  • @gregorythetford924
    @gregorythetford924 8 місяців тому +1

    Are you sure it would matter which wire is which? Seems if they’re both the same color that it wouldn’t matter.

  • @mike-dl3qr
    @mike-dl3qr 3 місяці тому

    Hello, mark, thank you for the video. Please, are the cables need to go in order or not really matter.

  • @bobbyalford1011
    @bobbyalford1011 4 роки тому

    what to do if one leaks water

  • @waltercardenas7354
    @waltercardenas7354 9 днів тому

    I have True GDM 12 not cooling. Compresor kicks and all fans run but no cooling. Any help I would apprreciate.

  • @xx300spartansxx
    @xx300spartansxx 3 роки тому

    Hey mark! just purchased a used unit just like the one in your video . Not sure if the thermostat Is working properly. It goes down to around 8 and can’t regulate the temp. It sounds like it is constantly working unlike my house fridge that kicks on and off. Any idea what the problem might be ?

    • @manko717
      @manko717  3 роки тому

      Yes, you probably need a Thermostat, if it gets cold, but you cannot control the temp range. It's a great thing it gets cold.

  • @teeshapatten6608
    @teeshapatten6608 2 роки тому

    Mine was cold to the point of freezing and then not cold at all and then it stopped getting cold all together and making a loud noise so I unplugged it. Do you think it is the thermostat

    • @manko717
      @manko717  2 роки тому

      What kind of noise. Fan in top on inside? Or fan below, underneath

  • @tizoclanderos2743
    @tizoclanderos2743 Рік тому

    Mark,
    I was trying to replace the thermostat but the old on in the unit is "Danfoss/077F1311RU" cant find it anywhere. It is not the one in the parts manual. Can you help. Also, the old part has 3 connections (1 White-2 Pink). Thanks.

  • @tammyrendon3315
    @tammyrendon3315 3 роки тому

    Hello, can you tell me what number on the dial would be the recommended setting for the thermostat?

    • @manko717
      @manko717  3 роки тому

      If the thermostat is getting old, you might be maxed out, turned Clockwise, all the way. With a New Thermostat, working correctly, possibly Halfway, or a little more. You have to get it dialed in - but only move it just a little bit, when you get close. A whole number is way too much, when you get close. I’m talking only moving it 1/4 of an inch.

    • @bennieboy2014
      @bennieboy2014 2 роки тому

      What if is not cooling it's at 50degrees is it still Thermostat?

  • @woodlandace
    @woodlandace 2 роки тому

    A friend of mine just gave me a GDM-12 for free, I’m using it as a beer fridge. The only issue is that there is fog in between the 2 glass panes in the door. Is there a way to clean it? Thanks

    • @manko717
      @manko717  2 роки тому

      No, it has broken seal between the panes. Wish I could say it fixable, but no. They only way is keep you eyes open for a broken fridge. Take the door off of it.

  • @Cathyscake
    @Cathyscake 3 роки тому +1

    How do you know when we need to replace the thermostat? Mine is running ok (holding around 40 degree) except it frequently run the machine to cool the fridge. I suspect it is a air leak due to the condition of door seal gasket. So should I replace the gasket or thermostat in this case? Thank you in advance.

    • @manko717
      @manko717  3 роки тому +1

      If your door seal is leaking, it won't hold temp, constant, so the compressor will kick on and run. I would replace the door seal. About $60 on eBay. Make sure you get the correct one. Call True, to get the correct Seal, using the Serial Number.

    • @Cathyscake
      @Cathyscake 3 роки тому

      @@manko717 thank you very much for your response. I already ordered one and it is on its way. Till I see your video, I thought it could be a problem with the thermostat. Hopefully it is not. Btw how do you know when you need to replace the thermostat? What are the symptoms? Thanks

    • @manko717
      @manko717  3 роки тому +1

      @@Cathyscake When you cannot get it to hold at about 35 degrees. You should be able to dial it in, under 40. Those thermostats get old and just won't do right. plus, it should be pretty simple to dial it in, if moving the control causes huge temp swings, that's a problem.

    • @Cathyscake
      @Cathyscake 3 роки тому

      @@manko717 mine is around 40 for now. I don't think I can get lower than that. But 40 is ok too me. The only annoying thing is it keeps on and off so I hope replacing the gasket will fix

    • @manko717
      @manko717  3 роки тому +1

      If you are maxed out on the control and 40 is all you can get, you must have a really bad gasket. Gaps? Once you do the door gasket, and you can't back the control off any, you might need a thermostat.

  • @littlejoefragrance760
    @littlejoefragrance760 4 роки тому +1

    I need to find the light bulb?

    • @manko717
      @manko717  3 роки тому +1

      Walmart sell them. Fluorescent bulb.

  • @gerardhogan5074
    @gerardhogan5074 2 роки тому

    I have a GDM 10 that is making a noise coming from the fan on the compressor . How do I change the fan. Do you have a video of this ?

    • @manko717
      @manko717  2 роки тому

      Check the shroud around the fan. It’s made of like a cardboard material. You can pull it out of there. Sometimes the blades hit the shroud. You can pull it all out from the back side. Unplug it first. Then plug it back in, after you pull out that cardboard shroud

  • @kevinomeara3047
    @kevinomeara3047 2 роки тому

    Hello Mark , so I bought a used one in like new condition, the one problem is when I turn the temperature switch on I tripped the breaker… wondering what it could be

    • @manko717
      @manko717  2 роки тому +1

      A relay, or the compressor is no good

    • @kevinomeara3047
      @kevinomeara3047 2 роки тому

      @@manko717
      Thanks mark I’ll order a new one

    • @manko717
      @manko717  2 роки тому

      What do you mean by temp switch? The dial on the thermostat?

  • @MafiaHitmanX4
    @MafiaHitmanX4 11 місяців тому

    So I hear the fan from the inside work but not the bottom and it is not cooling. What do you think it is?

    • @manko717
      @manko717  11 місяців тому

      If the bottom fan is not working, that’s the evaporator coil fan. You can replace it, or it could be a relay that runs the fan.

  • @kalamelliel
    @kalamelliel 2 роки тому

    I have a True GDM-12 cooler that’s not shutting off, do you know what is the problem?

    • @manko717
      @manko717  2 роки тому

      Is it Cold. If it’s cold, it’s more than likely the thermostat. If the thermostat cannot detect the temp, it will keep running. If the temp is in the 30s or worse below 32, that’s not good for the compressor. Shut it down and order a thermostat. Don’t burn up your compressor

  • @teeshapatten6608
    @teeshapatten6608 2 роки тому

    Is there someone i can call to just come and fix my fridge, I am in California.

  • @goclips83
    @goclips83 4 роки тому

    Are these fridges loud? Or is mine broken?

    • @manko717
      @manko717  4 роки тому

      They shouldn't be. If it is, you may have a compressor problem or check the coil fan underneath. If it is coming from inside, could be the evaporator fan, in the top. But no, they shouldn't be loud. When they cycle on, they are louder than a house refrigerator.

    • @goclips83
      @goclips83 4 роки тому

      Mark Bond ok thank you!!!

    • @patrick8391
      @patrick8391 4 роки тому

      What if I don't have the putty to put around the thermostat

    • @manko717
      @manko717  3 роки тому

      Check the fan blade hotting on shroud, underneath. The shroud is just cardboard. You can just eliminate the thing.

  • @frankyanez1604
    @frankyanez1604 2 роки тому

    @Mark help please. Mine is cold but is freezing my drinks so I am hoping is my thermostat but the weird thing is that my thermometer states 38 degrees so maybe it’s bad..

    • @manko717
      @manko717  2 роки тому

      Thermostat needs to be replaced. Put a decent thermometer in there. I Oder them off eBay. Taylor Thermometers. I buy 2, so I can check with both. Great the fridge gets cold, but you don’t want it freezing. Not good for the unit. Unplug it and order a thermostat. I think I included the information to order in my video.

    • @manko717
      @manko717  2 роки тому +1

      You can get two Taylor Thermometers for less than $10. Tgey are nicr

    • @manko717
      @manko717  2 роки тому

      Taylor Thermometer 5925. Yellow color in danger zone. Order a Thermostat. Call: 800 550 0706. You will give them the Serial Number of fridge, inside upper left. They will check and call you back with price. Good people. Where I get mine. Ask for Josh if he is there

    • @frankyanez1604
      @frankyanez1604 2 роки тому

      The weird thing is that only some of the drinks freeze I would say like 5 glass sodas out of 100 that’s in the unit. I am still going to replace the thermostat it won’t hurt any. I back off the temperature knob to 5-1/2 from 7 and put a new thermometer will check if it makes any difference in 24 hrs..

    • @manko717
      @manko717  2 роки тому

      More than likely it’s fluctuating. Not good.

  • @Alexgonzalez-lh2nj
    @Alexgonzalez-lh2nj Рік тому

    Whts the part number I called thm n they want the part number

    • @manko717
      @manko717  Рік тому

      They want the model number of the fridge. If it’s a True, look in the upper left inside of fridge. It should be 7 numbers, upper left, just right of something like GDM-12

  • @stacielaflamme8774
    @stacielaflamme8774 3 роки тому

    Mine is holding at 20 degrees. I can't get it to go warmer which is freezing everything I put in there. I ordered a new thermostat. Hopefully this fixes it.

    • @manko717
      @manko717  3 роки тому

      More than likely the thermostat. You are lucky because you know it has plenty of Freon. I would unplug the refrigerator until you get your thermostat. Not good to run them below freezing.

    • @stacielaflamme8774
      @stacielaflamme8774 3 роки тому

      @@manko717 thank you. I did unplug it. Luckily for me I work in HVAC. :) cant wait till i get this fixed. ill be watching again when i need to replace the part so i know where to put the long tube

    • @manko717
      @manko717  3 роки тому

      @@stacielaflamme8774 very easy, just pull the temp knob off. Remove the two screws that hold the plate up. It will dangle down, because the two wires will be connected. Mark one with a sharpie, so you can remember which terminal to put each on on the new. Pull the pig tail out of the tube. If you have small hands it will be easy inserting the new one. It’s hard to get the original amount back in, but as long as you a fair amount in, it will work.

    • @energygirl9588
      @energygirl9588 3 роки тому

      What is the cost of the new thermostat?

    • @stacielaflamme8774
      @stacielaflamme8774 3 роки тому

      @@energygirl9588 I paid $60 on Amazon