This is the kit I used to fix my bumper from sagging: tinyurl.com/877ba34f LINK TO 1M CONVERSION PARTS: tinyurl.com/3uphrbr3 BMW MODIFICATIONS FROM ALL OF MY BUILDS: www.thicwhips.com All of my Wheel & Tire Setups: tinyurl.com/yyftysns
It looks amazing,it already did but now🔥🔥🔥 I hope you don't have speedbumps in your area. In the Netherlands it's full of them,I already destroyed a bumperlip on my E90😢😢.👊🇳🇱🇳🇱
Anyone got good suggestions for replacing f10 headlights? I have the condensation issue and want to replace them…I do have adaptive, and don’t want error msgs…
Absolutely love your build! I’m planning using your parts list for my own build. It’s so awesome that you shared it with such precision and detail. So thank you. 🙏 Question - I imported a 2008 135is this past spring from Japan that I am going to do the 1M conversion on. However, it’s Right Hand Drive(RHD). Will your OEM parts list still fit this car you think?
Is there anything from your perspective I should look out for? I’m a little worried about ordering all these parts only to find out they won’t fit on an RHD.
have you ever done anything content for a 2 series? Im starting to modify my first 220i which is not available in the US buy f22 and n20 pieces fit exacty the same
@@ThicWhips i know but is not the same 😫 220i engine is smaller, already ordered everything to make an m2 conversion (except fenders and hood) you should make a forum imo your channel is the best wen it comed to bmw or a disscord I would pay a monthly fee no doubt to hang out with your community
I've got an N55 135i DCT and would love to do a similar build with it. Beautiful! There was a vid on youtube of some guy running S85 in e82 chassis. Did you look into it, instead of S65? Might be worth going all the way the M route, especially with S85 manual transmission being available in the US :P
This car is off the hook...I will say that I liked the OEM look of the 1M (clone) without the front lip and side skirts. It's such a nice beefy profile already, but hey you do you! 👍🏻
I couldn’t tell you because this doesn’t have 1m subframes or suspension, it’s 135..which is inferior in every way. I will update in fall when I convert 👍
Bruh honestly, with a S65 this would be my favorite build on the YouToobz. The 135i is a gorgeous and true BMW, the 1M body is just outright pornography and when the most delicious engine is placed in it...🚀. I truly have no idea how you will fit it in or what you need to do with all the electronics, but i can't wait to see how you'll do it. Actually, it's my wet dream to put the S65 in a F-Series car, but i should dream on 😂. Thank god i could afford it, but no idea where to start🤣.
This is the kit I used to fix my bumper from sagging: tinyurl.com/877ba34f LINK TO 1M CONVERSION PARTS: tinyurl.com/3uphrbr3
BMW MODIFICATIONS FROM ALL OF MY BUILDS: www.thicwhips.com
All of my Wheel & Tire Setups: tinyurl.com/yyftysns
I been waiting 9months for this moment 🙌🏽 1M Clone looks so amazing! I’m so proud of you Jonathan! ♥️🤜🏽🤛🏽
Thank you bro!
This seems like a project one would never want to sell. Looks amazing. Phenomenal attention to detail.
Thank you!
Absolutely amazing transformation!! Great looking 1M clone.
This whip just keeps getting better and better
Dude love your taste!!!! 🔥🔥🔥🔥 that 1M clone looks toooo good!
We doin anything with the turbo setup? Big twins? Big dingle?
Where did you get the brakes and rotors from! ? Looks great been watching the build and bought a 135i loving it so far!
Clean build! Love watching the beginning to current progression. Thanks for making my Saturday afternoon car content thicc!!
It looks amazing,it already did but now🔥🔥🔥
I hope you don't have speedbumps in your area.
In the Netherlands it's full of them,I already destroyed a bumperlip on my E90😢😢.👊🇳🇱🇳🇱
Clean job.
love Your persistence.
A lovely car
Bro do you have the part # for the plastic bumper to fender clip @ 5:00
63171367868
What bonnet / hood is that?
Anyone got good suggestions for replacing f10 headlights? I have the condensation issue and want to replace them…I do have adaptive, and don’t want error msgs…
Looks so good! Great job!
This lip really completes the front end. Didn’t even cross my mind because the body work this car has is so clean but the lip is just👌🏼👌🏼👌🏼👌🏼 perfect
So sick brotha , you killed it !
Absolutely love your build! I’m planning using your parts list for my own build. It’s so awesome that you shared it with such precision and detail. So thank you. 🙏
Question - I imported a 2008 135is this past spring from Japan that I am going to do the 1M conversion on. However, it’s Right Hand Drive(RHD). Will your OEM parts list still fit this car you think?
Is there anything from your perspective I should look out for? I’m a little worried about ordering all these parts only to find out they won’t fit on an RHD.
The car looks amazing!! I'm really diggin that front lip!! 😍
Damn that’s clean bro! Start to finish has been a ride. What about E46 M3 next
It might be, I’ve wanted one for a while now.
Once again... Impeccable work sir!!!
have you ever done anything content for a 2 series? Im starting to modify my first 220i which is not available in the US buy f22 and n20 pieces fit exacty the same
I built an m2
@@ThicWhips i know but is not the same 😫 220i engine is smaller, already ordered everything to make an m2 conversion (except fenders and hood) you should make a forum imo your channel is the best wen it comed to bmw or a disscord I would pay a monthly fee no doubt to hang out with your community
I've got an N55 135i DCT and would love to do a similar build with it. Beautiful!
There was a vid on youtube of some guy running S85 in e82 chassis. Did you look into it, instead of S65? Might be worth going all the way the M route, especially with S85 manual transmission being available in the US :P
Are you selling any of your wheels?
1MCS is the perfect touch
Okay bro this car looks gangster 🔥🔥
I like the side skirts, makes the car look beefier 🔥
Car looks absolutely insane! 🔥
Dude. 🤤 so good.
I do think carbon at the rear will tie everything together. Either way, the thing is gorgeous.
Keep it up!
Thank you!
I use the same side skirt as you :)
Can I buy this from you
This car is off the hook...I will say that I liked the OEM look of the 1M (clone) without the front lip and side skirts. It's such a nice beefy profile already, but hey you do you! 👍🏻
Can you please write the number of this plastic bumper clip?
63171367868
Looks amazing.
Car is amazing! Suspension wise, how good is the handling of the 1M compared to the OG M2 & Comp? how about the new M2, M3, M4?
I couldn’t tell you because this doesn’t have 1m subframes or suspension, it’s 135..which is inferior in every way. I will update in fall when I convert 👍
Looks sick! What do you think about some cf mirror caps?
I might give that a shot!
Bruh honestly, with a S65 this would be my favorite build on the YouToobz. The 135i is a gorgeous and true BMW, the 1M body is just outright pornography and when the most delicious engine is placed in it...🚀. I truly have no idea how you will fit it in or what you need to do with all the electronics, but i can't wait to see how you'll do it. Actually, it's my wet dream to put the S65 in a F-Series car, but i should dream on 😂. Thank god i could afford it, but no idea where to start🤣.
🦍
Love it too man
Looks killer 😮💨😮💨🤘🏻🤘🏻
i like the no side skirt better.
I would get a front lip protector. I would slowly die inside everytime it scrapes :(
this car is badass
Honestly its looks better than real one
Killed it
tasteful style and great bmws
Time to start a F81 project.
Just WOW!
Sheeeesh!!!!
that MF so COLD 🥶
Top👌👍👍
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Just put the s65 supercharged v8 and it would be complete
Hope the Hoa's not in your neck soon lol Mint as always
My Hoa is chill, no smoke w me
Bruh 1️⃣
Brehhh 🤘🏽
Lookin tits!! Can I have you measure your front wheels center line to fender please? I’m trying to get a reference.
Rent it out on Turo.
Just kidding 😂
Lmaoooo