Good setup. I love seeing effective budget setup like yours. I originally got the Titan drawers for my 80 Series just as a temporary drawer system until I figured out what my ideal setup will be. But they worked so well that after 5yrs they're still there. Though I'm ready to replace them soon as my ideal setup is a fridge on the left side (in a cage) with a top & bottom drawer system on the right with level height as the fridge. That way I still have a flat surface to store gear on top.
Had a drop down slide works well and a evekool 60 litre fridge/freezer now I have arb kitchen draws and now have purchased a 65 litre brass monkey upright fridge freezer to install
Hi where did you get the bracket that attaches to the spare wheel bracket and the table from for the fridge can't go wrong with Engel I've got two and had them for 15 years and never had a problem with one is going all the time
At 6:00 where you put the top plates on: does anyone know what that aluminum framing material is called? I need some for the edges on my wooden rear platform
Drain pipes normally are but not drinking water. Copper pipes was the old school way now its multicapa with press fittings so no glue needed. @@Depsay5566
Great ideas. You inspired me. I am heading to Bunnings tomorrow.
This is the most creative setup I’ve seen
Very great ideas! I might take inspiration for the kitchen bench as I am looking at a similar solution
Those are some nifty setups mate well done!
Good setup. I love seeing effective budget setup like yours. I originally got the Titan drawers for my 80 Series just as a temporary drawer system until I figured out what my ideal setup will be. But they worked so well that after 5yrs they're still there. Though I'm ready to replace them soon as my ideal setup is a fridge on the left side (in a cage) with a top & bottom drawer system on the right with level height as the fridge. That way I still have a flat surface to store gear on top.
So many cool and inventive ideas! Thanks for posting.
Great ideas. Definitely doing the table extension
Love the water tank idea! I'm definitely stealing that one for my upcoming build.
wow. this video will change my life in a few years when i retire!!!
Very nice job young fella. You don't have to spend a squillion to have a practical set up! Enjoy!
Seriously, MacGyver needs to come to you for tips!!! 😉 Very inspiring. Thanks for sharing. I wish I had half the skills you have.
Impressive mate. Borrowing some of your ideas... great work. Thanks. Subbed 👍🍻
Also for the tank get a tank that you can add pressure to and boom shower problem fixed
Wicked mate! Great vid
Good video mates madd set up I got the same rig too
Consider a dune , i have the 45 letter model.
No complaints
That water reservoir is ace.
Very impressive
Had a drop down slide works well and a evekool 60 litre fridge/freezer now I have arb kitchen draws and now have purchased a 65 litre brass monkey upright fridge freezer to install
Sounds like an awesome setup
Well done, clever
If you want a fridge that lasts go with Engel.
This is sick
That’s solid
Absolute legend
You should have pointed the drain back and have a 90 degree and ad a small extendable hose
Can you please share where you found or purchased the threaded painters pole connector that are on the table specifically what you used by the sink?
They are from Bunnings
Hi where did you get the bracket that attaches to the spare wheel bracket and the table from for the fridge can't go wrong with Engel I've got two and had them for 15 years and never had a problem with one is going all the time
Wow that’s good to know! So with the bracket I actually cut up some 3mm sheet metal and welded it to fit. This was done before I started UA-cam…
hey.. awesome work dude.. just wanna ask, is it possible to mount the air compressor inside the engine bay?
Yes very possible.
Noice! Thanks for sharing.
Is all these things wired straight to the cars main battery, accessories or do u not kill ur battery running all these straight off?
They’re run from the auxiliary battery. Solar panel charges them.
Well done
Sharp as bro!
Excellent!
At 6:00 where you put the top plates on: does anyone know what that aluminum framing material is called? I need some for the edges on my wooden rear platform
Maybe alloy tray top?
Just made your table without the stainless
How does it go when car is tilted sideways?
@@jeffkeating8994 I’ve always used max trax to make sure the car is level on uneven surfaces
On long trips out into remote locations I would like you to consider a 200 litre water bladder on the roof under the roof rack for showering .
200L of water that high will drastically change the centre of gravity of the car unfortunately.
Just a question in regards to the lights on you tailgate. Where did you get them from
Anaconda
Thanks just checked there website and not listed now so have find something else
u forgot the 3 grand for the tyre carrier to make it all work 😂
An Esky for the fridge
Esky better, food in tupperwares keeps it dry and fresh, a quality one should hold ice for a long weekend, and every servo carry’s ice if topping up
I’m not going to lie as a plumber don’t think it’s very safe using that tank for drinking water because glue and primer is quite toxic
??? Aren’t the water pipes in homes pvc??
Drain pipes normally are but not drinking water. Copper pipes was the old school way now its multicapa with press fittings so no glue needed. @@Depsay5566
LEGEND
great m8
Dang this video of this man makes me vulnerable 🥵
just to make you aware the pvc you used or the water tank is made using lead i wouldnt be drinking it .
fuck yeah
Arb
You’re a deadset weapon hey. I feel so useless watching this
Lazy fella, take the snorkel off and do it right once, shame on you haha
It's called working smart not hard smh
Why you buy a stock 4x4 .. 🤢🤮