I’m just starting in epoxy resin. I really hope to reach that caliber someday. Question, how much does that design table now sell for? Round figure is fine.
Thanks very much. It looks harder than it actually is. You just need to start doing these art pours and you will get to know what works. I These sell for around the $100 + $150 USD figure.
I do pour painting and I’ve never seen anyone trying to blow the design out with a heat gun , the heat gun is only used to pop the bubbles , people usually use the hair dryer then let it dry before applying resin to protect the design
Thanks for watching. You are correct a heatgun is great at removing air bubbles. I find with a fast cure resign if its starting to cure while pouring the extra heat the heat gun provides over a hairdryer makes it a bit more viscous again to blow it a little further. I find that you have a little more control with a heatgun over a hairdryer in pushing the hotair as well, however I use a hairdryer at times as well.
Thank you for your comment. First you need to tape the underside with painters tape to make sure you can remove any drips once it's dry. Next you need to make sure that it's 100% level so the resin runs off the edge evenly. If you have gaps you can run your gloves hand around the edge to make sure it's all covered with resin. I hope this helps.
If the cloth was stuck to some kind of backing like wood then you could coat it in Epoxy Art Resin and it would protect it. You would have to watch for airbubbles and use a blue flame to pop them.
very interesting art
Thank you so much 😀
I’m just starting in epoxy resin. I really hope to reach that caliber someday.
Question, how much does that design table now sell for? Round figure is fine.
Thanks very much. It looks harder than it actually is. You just need to start doing these art pours and you will get to know what works. I
These sell for around the $100 + $150 USD figure.
I do pour painting and I’ve never seen anyone trying to blow the design out with a heat gun , the heat gun is only used to pop the bubbles , people usually use the hair dryer then let it dry before applying resin to protect the design
Thanks for watching. You are correct a heatgun is great at removing air bubbles. I find with a fast cure resign if its starting to cure while pouring the extra heat the heat gun provides over a hairdryer makes it a bit more viscous again to blow it a little further. I find that you have a little more control with a heatgun over a hairdryer in pushing the hotair as well, however I use a hairdryer at times as well.
Each artist has their own technique. You need to respect that.
Air pressure forms cells...
Hocam merhabalar ben de bu işi yapmaya başladım ama kenarları sizin gibi olmuyor nerede hata yapıyorum sehpanın kenarları açık kalıyor
Thank you for your comment. First you need to tape the underside with painters tape to make sure you can remove any drips once it's dry. Next you need to make sure that it's 100% level so the resin runs off the edge evenly. If you have gaps you can run your gloves hand around the edge to make sure it's all covered with resin. I hope this helps.
Teşekkürler hocam
Bellissimo davvero quanto è spesso il pannello? Grazie se mi risponde
Thank you 😍 The panel is 18mm thick.
Sir, is there any such chemical available that if a design is made on a wet cloth with a roller, it will remain the same?
If the cloth was stuck to some kind of backing like wood then you could coat it in Epoxy Art Resin and it would protect it. You would have to watch for airbubbles and use a blue flame to pop them.
Where can we get these MDF rounds???
I made mine and have a video on my channel how to make them if you have a router. You can buy them from some art supply places as well.
What us This wood name?
The wood is called MDF: Medium Density Fibreboard. Its an engineered wood and its cheaper than plywood.
Buenas noches pueden explicarme en español por favor gracias me gustaría hacer un cuadro
Escribiré una entrada en el blog esta semana sobre cómo hacer una pintura de resina para ti.
Sar chemical k naam batao
Sorry I was unable to translate your comment. Are you able to put it in English if possible?
não vou assistir porque você não fala o material
Você pode assistir este com instruções. You can watch this one with instructions ua-cam.com/video/TDV4GeGptWw/v-deo.html