This is absolutely fantastic!! I met guy up in Maine working the river with your prototype. It worked flawlessly!!!! I will be building one tomorrow. Thanks for the insight🤘⚒️
I'm not sure this is very cost effective considering time and material when you can buy a steel nozzle for $100. But this is an excellent video for the diy guys.
That has alot of suction. You really seem to know what your doing. I am currently attempting to build a 4 inch nozzle in order to suck sand off a lake bed and pump it behind a new seawall for backfill. I am attempting to pump the sand up to 6' in height. So far I have been able to pump sand but not enough. I dont have good suction. I am running a riverside 2-1\2" high pressure pump powered by an 11hp honda engine. What should my jet size be for my 4 inch system? Do you have any suggestions?
I am dredging a hole in my boat slip and saw your video and said this may work. My question I am curious about is that if I use a 4 or 5 foot gravel (in my case sand)suction pipe would that affect the performance? I need to move about 3 yards of sand for my keel to rest in. Thanks for share your video.
Parabéns ! Gostei muito . Tenho uma saída da motobomba de pressão a gasolina de 2" polegadas ,,,, esta pasta que você coloca é uma cola ? E onde posso encontrar para comprar ? Obrigado desde já . Parabéns pelo talento e a forma clara de explicar .Att.
Really useful especially in our place where ready to use nozzles are rarer than gold. Thank you!
This is absolutely fantastic!! I met guy up in Maine working the river with your prototype. It worked flawlessly!!!! I will be building one tomorrow. Thanks for the insight🤘⚒️
Great idea!
muy Bueno......gracias!!!!!!!!!!!!!!!!!!!!!
Enjoyed the vid, does the "u" piece serve any purpose?
well its nice use of my principle :) that i use in my nozzle i made :)
I'm not sure this is very cost effective considering time and material when you can buy a steel nozzle for $100. But this is an excellent video for the diy guys.
Nice work. But how many hp is of your motor pump? Can I do dredging of a pond with 2 hp motor and this nozzle?
The "u" piece is to get the high pressure water to the jet.
This is the BEST EXPLANATION of a dredge I have seen on utube. You are a star. Are you using a 12v pump or gasoline?
Great idea, but bondo absorbs water. Use a fibreglass reinforced filler instead
That has alot of suction. You really seem to know what your doing. I am currently attempting to build a 4 inch nozzle in order to suck sand off a lake bed and pump it behind a new seawall for backfill. I am attempting to pump the sand up to 6' in height. So far I have been able to pump sand but not enough. I dont have good suction. I am running a riverside 2-1\2" high pressure pump powered by an 11hp honda engine. What should my jet size be for my 4 inch system? Do you have any suggestions?
and for agent de démoulage take soap for a kitchen.... palmolivei have a friend we know do thatttt is a nice twisttt try thist
Nice idea Thanks for sharing, sO the size of the inner hole is 1/2 inch correct?
I am dredging a hole in my boat slip and saw your video and said this may work. My question I am curious about is that if I use a 4 or 5 foot gravel (in my case sand)suction pipe would that affect the performance? I need to move about 3 yards of sand for my keel to rest in. Thanks for share your video.
,hi Randal,,will a 50 cc honda work,,my keen nozzle scree up,nice work
Parabéns ! Gostei muito . Tenho uma saída da motobomba de pressão a gasolina de 2" polegadas ,,,, esta pasta que você coloca é uma cola ? E onde posso encontrar para comprar ? Obrigado desde já . Parabéns pelo talento e a forma clara de explicar .Att.
Nice build I couldn't do it better myself :)
Хорошо придумано. Спасибо
Would I need to make some diameter adjustments if I wanted to use a 3000gph 12v bilge pump?