Ekopel Drain Process | The Installation Process Of an Ekopel Drain | Easy Drain Steps
Вставка
- Опубліковано 6 жов 2024
- Ekopel Drain Process | The Installation Process Of an Ekopel Drain | Easy Drain Steps
(Taping, Pouring, Scooping, Tape Removal, Wiping)
Step 1: Tape the Drain with 1.5-2” Masking Tape
Step 2: Slice out edges with razor blaze.
Step 3: Pour Ekopel and allow to flow over the tape
Step 4: Wait 4-6 Hours
Step 5: Scoop excess material off of the tape with a bonds spreader, or plastic spoon
Step 6: Remove the Masking tape
Step 7: Wipe any excess material off with a dry paper towel, or Alcohol moist paper towel.
**Where it says KJ at mark 7:19 it should say 15 minutes later**
Ekopel 2K is available at refinishedbathsolutions.com
For further information or to order yours call: 877-882-2278
Or visit our website: refinishedbaths...
The best refinishing kit Available Now: www.amazon.com...
Every step of the process to refinish your tub with Ekopel 2K is shown and explained.
REMODEL IT YOURSELF: No need to hire a spendy expert. This refinishing kit takes the expense out of bathtub improvement. Perfect for renters, apartment dwellers, and residential or commercial tubs, sinks, and showers.
ECO-FRIENDLY & NON-TOXIC: Fumes-free and made without harmful chemicals, Ekopel’s long-lasting, oil-free glaze never peels! Its thick, full-seal coating restores tub surfaces to a “like new” bright gloss.
STEP-BY-STEP DEMO VIDEOS: Free videos take the mystery out of re-glazing. We guide you through the prep, application, and finishing steps. If you can follow instructions, you can DIY recast your tub in 2 to 4 hours.
KIT CONTAINS EVERY TOOL YOU NEED: Our tub & sink remodeling kits include foam roller with covers, scooper boxes, and easy-pouring, safe-to-use Ekopel 2K enamel.
24-HOUR CURE TIME: After applying Ekopel, it takes 24 hours to “set” before using your tub/shower. Maintain 72 degrees Fahrenheit in the bathroom for the shortest cure. In lower temps, it will take longer to set.
Order yours today at bathepoxy.com Use coupon code youtube10 for $10 off at checkout.
EKopel 2k is the premier bathtub refinishing kit. We provide top-notch customer service and the longest-lasting bathtub kit on the market.
#EkopelDrainProcess #ekopel #bathtub #homeimprovement
Thank you for your attention to detail. This video was one many of us were hoping for and it personally gives me more confidence that I will be able to get it right when I am ready to do this. I prefer your product because of the no/low fumes and it looks like it actually works, unlike some others. On a funny note, I think one of the Chateaux refurb channels in France used it to redo a vintage bathtub and it worked really good, except for a few mistakes made by the person applying it but fortunately he realized and was able to easily fix the problems and the tub came out looking really good.
This is expertly done. Great method to keeping the excess pooling cleared. Inportant step in the entire process not to be forgoten. Thanks for this and i watched entire video. Thumbs Up! and Smashed the Like Button #836
Just finished my pour be checking on it all day
How about showing how you actually wipe the drain without you in the way? Trying to see how much you wipe each time.
Like a leaky butthole.. gotta keep the sides and around smooth while making sure to clear the hole so it can continue to leak, repeat until it stops making sure not to wipe too hard or too much to avoid chaffing..
Can I just remove the drain before and then replace it or install a new one? Thanks...
Thanks for the video. I'm still worried (perhaps unjustified) about the interface between the drain flange and the coating. Seems like an area prone to failure or might end up epoxying the drain flange so it can't be removed normally. I plan to remove the flange, tape the drain hole similarly to your technique( but inside the diameter of the flange), then replace the flange on top of the ekopel. Wish me luck!
Good luck, sounds like a good plan.
So Sloan Looney have you done this yet? I'm going to do the same thing I think. Any pointers b4 I twist the drain out?
Thank you for the video
Is there a particular reason why you shouldn’t leave the tape on the drain for 4-5 hours if you’re continuously wiping it? I’m afraid of trying to peel it while the tub may still be wet and making a mess with a handprint in the tub.
rather than doing it this way, could a person just remove the metal drain and allow it to flow? I have an old tub and candisconnect some of the pipes so it doesn't actually flow into the pipes itself.
thats what i did. He recommends doing it the way your saying but a lot of people are not confident enough to take it out and reinstall the drain .
Thank you for sharing this information
ngl i feel like we might as well just caulk a bead of silicone around the drain to prevent it from getting in tbh.... then just remove it when ur removing the tape
Your videos are normally very educational, but on this one, You didn't show where you poured, also every time you were doing something your body was blocking the camera. I wanted to watch this one because I need to redo my drain area as well.
This was the 2 hour live pour video from the day before. This is simply the drain portion of a full pour.
Great videos. How much would you charge to do this? Ball park. In MO.
I have some rust near the drain area where the original porcelan is thin. Should i use sand paper on the rust?
Yes, you can use sandpaper to sand the rusted area. You can also use something over that area to treat the rust, and you can also use car bondo to smooth out the rusted area.
I did my tub 2 days ago and some of the stuff accidentally went down the drain and clogged it up completely... When I turned the water on, I realized that it was backed up in the tub and even when used with an electric snake, nothing happened. Is there anyway to have this fixed? My anxiety is to the roof!
I would recommend trying to heat the drain with a heat gun or hair dryer then scrape what you can out. Can even try using ace tone. If none of that works then you will need to call a plumber to replace the pipes.
I have an uninstalled claw for tub in my shop no drain or facet at all. I’m going to refinish before it’s installed. Do I need to tape the drain? Or just put a cup under the drain?
As long as it's uninstalled you can just place something underneath to catch the excess. Its the best easiest way to do a clawfoot.
@@RefinishedBathSolutions TY
Did my tub last week but some of the product dried on top of the drain. How to remove overrun from the drain?
Try to heat area around the drain with a heat gun or hair dryer then score around the drain or where you thing the drain is with a razor blade. If that doesn't work use a dermal tool to cut it out. Sand the rest smooth to the touch with 220-320 grit sandpaper buff if needed or use a pour on touch up kit to fix. Make sure no water can get up under the finish at the drain area or you will have bigger issues later down the road.
Just so I understand, I can wait 4-6 hours before I remove the tape? How long is too late?
We recommend peeling the drain tape 1 hour after you've poured. Then baby sit it for the next 4-5 hours to make sure no material gets into the drain, wipe away any excess. Remove the rest of the tape on the unit at hour 4-5 after you've poured.
Question.. if im.replacing the drain should I do it before the refinish or would it be better to do the refinish with it removed and replace drain once product has dried
I would recommend taking it out refinishing and then once dried and hard put the new one in.
@@RefinishedBathSolutions Is there any danger of the product making the drain hole a little smaller, so that the hardware won't quite fit back in?
Just poured my tub, if I put a plastic cup over the drain do I still need to keep scooping?
yes scoop out any pooled areas
I pulled the tape after 6 hours but it still stuck, and pulled the finish and dripped bubbles and smears that are now hardened. Can I use a heat gun to smooth this out ?
I would recommend sanding any affected area areas smooth to the touch with 220-320 grit sandpaper then if you don't need more material you can go to 600 then 1500 then use nay car buffing compound to bring the shine back. If after sanding you do need more material use our pour on touch up kit.
Why not use a small hose/tube with a shop vac to vacuum up drain pooling?
Your shop vac would be totalled.
@@RobertLinthicum how so? With the right length tube the epoxy will never reach the shop vac. Remember, you’d only be sucking up a tablespoon at a time.
I want to apply to my bathroom tiles walls. Is that possible? If so I have a inch of different colored tile, do I tape it and use the process as taping the drain?
I glazed my tub yesterday and taped up the drain but had to leave so the glaze did pool over the tape. Today removing tape and the glaze is hard over drain so can't. How can I remove?
Can use a heat gun or hair dryer to heat the area then score around it with a razor blade and try to cut it out if this doesn't work then can use the dermal tool and cut it out. Then can sand smooth with 220-320 and buff it or use touch up if needed.
What about the overflow hole? Same process??
3/8 thick at the drain when finished and had to chisel it out won't use this product again. Unfortunately don't think my customer wants me to sit and babysit a bathtub for 6 to 8 hours at $55 an hour
About a year after using ekopel refinish, a light brown streak has emerged down the middle of the tub.. any suggestions on how to cover or remove this streak?
bueno pero deberían poner subtitulos en español
With your body always in front of the camera, we cannot see what you are doing wiping the drain. it is frustrating.
Do I need to fill chips before I use this kit ?
yes fill any cracks, chips, holes, dents, or pitted areas with car bondo
I ask for help twice and got no response, neither by phone or e-mail. I am not an expert like on your video men. I did make have some extra runs that I needed to know how to clean up or fix. Your videos are good for experienced construction, but not too good for me.
Hello Connie, I apologize that you were not able to reach us. sand down your runs and you can clean up unwanted ekopel with acetone. If you have any other questions please free to give us a call!