@@kranu222 that's the round four pin cable accessed by removing the handle bar? I'll try that, leaving it disconnected overnight. My display board looks okay, no water ingress. I can't remove my battery cover, most of the screws are damaged. I want to disconnect the battery for a day.
I know you're tinkering with a 365 but I have a ninebot MAX and just thinking about what to do when the battery starts to shit the bed. Would it be super hard to build one out of LG cells and make a NEW internal battery? The only ones i see being sold are sketchy shit from Alibaba and Ebay.
I actually have a video tearing down a ninebot G30 MAX LD battery ... it's not the big boey g30max but - I'm sure it's awfully similar you can totally rebuild it using whatever cells you want I also have a video on the spot welder I got for such jobs 🤘 got you covered on most fronts 🔥
@@Darieee Bad ass man, I will dig deeper into your channel when I have some free time. Thanks for these videos, im trying to learn and these are very helpful for me.
Bro do you have a video how to spoof the Connectors? Want to build a Station to flash Controllers without a 36v battery👀 Only with connection from dash to Controller, maybe powered by a st Link. Idk If its possible that way
corrosion it conductive and will let a small current crawl inbetween where its not meant to get to. start by clean up that green corrosion properly then meassure and fix
I fixed mine with just disassembling and cleaning little blue power button. Just be carefull guyz there is a small metal peace that you dont want to loose otherwise is super easy. p.s. Use pure alcohol for cleaning Thank me later =) ( POWER BUTTON FIX / DOESNT WORK )
Loving the content and learning so much that I’m going to become a hoarder 🧌and try to up cycle the broken things I see at my friends and family’s homes lol
![XIAOMI PRO2 Battery - Repair 1 [Teardown & Cell Swap]](http://i.ytimg.com/vi/oZrjan6weCE/mqdefault.jpg)
![XIAOMI PRO2 Battery - Repair 1 [Teardown & Cell Swap]](/img/tr.png)
Good job! Thx! But where did you get the plan for the circuit board?
My battery no need charger can be fixed or not
Got something similar issue. I folded my pro 2 while it was wet then the power button stopped working and it cant be turned off.
I have the same issue, you get yours fixed?
@@Gunzee I just disconnected the display from the controller and let it dry overnight then it worked as normal.
@@kranu222 that's the round four pin cable accessed by removing the handle bar? I'll try that, leaving it disconnected overnight. My display board looks okay, no water ingress.
I can't remove my battery cover, most of the screws are damaged. I want to disconnect the battery for a day.
I know you're tinkering with a 365 but I have a ninebot MAX and just thinking about what to do when the battery starts to shit the bed. Would it be super hard to build one out of LG cells and make a NEW internal battery? The only ones i see being sold are sketchy shit from Alibaba and Ebay.
I actually have a video tearing down a ninebot G30 MAX LD battery ... it's not the big boey g30max but - I'm sure it's awfully similar
you can totally rebuild it using whatever cells you want
I also have a video on the spot welder I got for such jobs 🤘
got you covered on most fronts 🔥
@@Darieee Bad ass man, I will dig deeper into your channel when I have some free time. Thanks for these videos, im trying to learn and these are very helpful for me.
glad you're enjoying it 🔥, thanks!
Bro do you have a video how to spoof the Connectors?
Want to build a Station to flash Controllers without a 36v battery👀
Only with connection from dash to Controller, maybe powered by a st Link.
Idk If its possible that way
Hello
Can you give a link with pdf for "xiaomi dashboards pinout" ?
Thank you
corrosion it conductive and will let a small current crawl inbetween where its not meant to get to. start by clean up that green corrosion properly then meassure and fix
Where are you from, i cant turn off my Xiaomi pro 2, im living in Milton Keynes, maybye you can help me
sorry mate :(
I'm roughly 3000km away from you
@@Darieee oh ok, no problem thanks for answering
Were did u get the shimatiq
which one ?
haha the intro bro 🤣🤣
I fixed mine with just disassembling and cleaning little blue power button. Just be carefull guyz there is a small metal peace that you dont want to loose otherwise is super easy. p.s. Use pure alcohol for cleaning Thank me later =) ( POWER BUTTON FIX / DOESNT WORK )
Ｐ𝐫Ｏ𝕞Ｏ𝓢ｍ
Loving the content and learning so much that I’m going to become a hoarder 🧌and try to up cycle the broken things I see at my friends and family’s homes lol