Hood Vent Fan Review: It Works!

Поділитися
Вставка
  • Опубліковано 6 бер 2022
  • RodLouvers Pair of Angled Aluminum 5" 11
    Louver Hood Panels Jeep YJ (Bolt-On) Kit
    www.amazon.com/dp/B01LXKJ96G/
    ref=cm_sw_r_sms_apip_Otx4MUVNsMYm2
  • Авто та транспорт

КОМЕНТАРІ • 28

  • @naharmardiyantoro3892
    @naharmardiyantoro3892 Місяць тому +1

    how to protect the machine from water or rain?

    • @fabguy276
      @fabguy276  Місяць тому

      Make a Cover for it like I did with dzus tabs.

  • @808alldevon
    @808alldevon 2 роки тому

    Where did you get that hood? Is it custom? Love the hoo.

  • @brucewilson1118
    @brucewilson1118 2 роки тому

    Where did you get that hood in those louvers?

    • @fabguy276
      @fabguy276  2 роки тому +1

      RodLouvers Pair of Angled Aluminum 5" 11 Louver Hood Panels Jeep YJ (Bolt-On) Kit www.amazon.com/dp/B01LXKJ96G/ref=cm_sw_r_sms_apip_Otx4MUVNsMYm2

  • @DustySteel
    @DustySteel 2 роки тому

    That was quick lol.

  • @jaimepena3594
    @jaimepena3594 2 роки тому

    What was your temp guage at b4 the vents and pusher fans

    • @fabguy276
      @fabguy276  2 роки тому +1

      Trans or water? Unfortunately, it’s also extremely dependent on outside ambient temperatures. The pushers reduced my trans temps about 12 degrees Fahrenheit from what I could tell by trying to test it within the same parameters.

    • @fabguy276
      @fabguy276  2 роки тому +1

      Engine hasn’t gone over 198f and the trans temp hasn’t exceeded 171f with the new setup, but it has only been tested in 84f ambient temperature. Summer will be the true test. I may have to remove the winch and put it on a disconnect system.

    • @jaimepena3594
      @jaimepena3594 2 роки тому

      Oh ok.. i just installed vents yesterday the hood is not as hot as it used to get. But my engine temp slowly climbs to 215 220 tops in 70 degree weather.. id like for it to stay at 210 .. you think the pusher fans would help with that??

    • @fabguy276
      @fabguy276  2 роки тому +2

      @@jaimepena3594Hesco water pump and Hesco thermostat housing are the best mods to reduce temps. 180* thermostat as well. But yea the pushers would help but they are a band aid. Try to get to the root of the problem. Flush the system etc

    • @jaimepena3594
      @jaimepena3594 2 роки тому +1

      Cool.. i have 2 core mishimoto rad hi flo flowkooler water pump.. oem clutch fan and e fan new hoses clean coolant and burped air out of system..i havent done the hi flow thermostat housing yet..