Taotao ATM150-A Evo scooter - replacement of fuel and vacuum lines
Вставка
- Опубліковано 10 вер 2024
- In this video, I trace the fuel and vacuum lines after they have been upgraded on a Taotao ATM150-A Evo GY6 150cc Chinese scooter. It's a good idea to upgrade these lines because the stock lines are prone to deterioration within a few months, and a leak could leave you stranded. These lines are high quality Helix vacuum line (blue) 3/16" x 3' and Helix fuel line (red) 3/16" x 3'. Of course, you can choose your preferred color and brand for each. The nice thing about these lines is that they're translucent so you can see if you're getting fuel in your vacuum line and make sure that fuel is flowing in the fuel line.
![No more vacuum fuel pump problems! GY6 Won’t start: FIX! [PROBLD PULSER UNIT]](http://i.ytimg.com/vi/I_k3jgNswCU/mqdefault.jpg)
![No more vacuum fuel pump problems! GY6 Won’t start: FIX! [PROBLD PULSER UNIT]](/img/tr.png)
Thank you so much My moped had issues for 3 days now.. It starts then it shuts off.. It was that damn vacuum line.. It was not connected. Just hanging lose.. With your video i finally found out where it goes. Now everything is great. Thanks again
Thanks so much for sure exactly where the lines run to and which is which sometimes we leave videos to explain the small details this exactly what I was looking for
Thank u so much I’ve been looking for a video like this
so I ripped out my stock air box/filter and emissions and then had no clue what to do with the vac lines n where to run the fuel lines, then I tripped right here to this video..no wait hold the phone..AWESOME VIDEO!!! no I am no longer clueless..Thanks dude for posting this ..
Instead of using a splitter can I just run align to the carburetor from other intake port and then one from the petcock to the other intake port
Exact video that I needed! Thank you so much !
help remove the petcock and conect a hose straight from gas tank to carb and the scooter start right way but if i stop giving gas it dies
you tube should allow photo comments. i like your videos!! so helpfull!!
Thanks
Most simple video bro great stuff
thank you so much for this tutorial
What kind of gas for those?
Thanks for showing this.
plz help i have all i need but my carberator dosnt have a port by the throttle cable place and its has only one nipple on the part that holds in the carb.
If I want to replace all of PVC hoses as you, those PVC hoses does have temperature limit range? Are they special type? Maybe you give some idea, thanks!
why is the one vac line plugged doesnt that go to egr or can u explain
Year 2022 video worked thanks
Yeah this really helped out alot
Where can I get this vacuum line from?
what is the line off the top of the gas tank? i cant seem to figure it out, nor know why its thier on my scooter
also the line coming out of the air box tube , does that go directly to the cvt case? also do i need that
My oil pipe has come off the engine on my ajs 50cc moped and I don't know were it goes bk on to the opposite end of the oil reservoir
Hi,
How many feet of hose do you actually need for each line?
Mine turns over but not getting gas is there a shut off for tao tao gy6
Bro plz help...... I have some hoses or lines that I don't know where they go
I have a problem with them. The first one was blocked due to non-using the scooter. It was replaced with a new one. Then, the new one was ok for only 2-3 weeks before it gets blocked again, so the fuel can't go to carb. Idk the issue, since that the fuel is good quality.
will you please please please make a video showing where every fuel and vac line leads to? this is the only high quality set of videos i have found that has the exact same scooter as me. I need to know where the fuel line out the bgottom of the carb goes, how the lines lead to the "pair" system, and the one from the crank case.... or point me in the right driection for the video. thank you
The fuel line from the very bottom of the carb has a "spring" around it and is just a drain hose for the float bowl. It leads down to the belt housing and has a screw that you can loosen to drain the carb's float bowl. There is a vacuum line that leads from the intake manifold to the "petcock". This signals that the carb needs fuel and opens the diaphragm to allow fuel to flow to the carb. If this is not connected or has a hole in it, the engine will not run. There is another "vacuum" line that runs to the air cleaner housing which doesn't do anything but recycle unburned gas fumes. It is not necessary to run the engine.
WHERE CAN I BUY THE VACUUM LINES??? PLEASE HELP ME!!
thanks for good explanation!
Hi j have a zip piagio 07 4t , i have no vaccum line kinda looks the same
Where the another line go the way u made it sound was like 2 different ways
Excellent tip. Thanks. It's too bad that youtube doesn't have more features like allowing a photo upload with a comment. It would be cool to see a picture of this.
L
So where does the other hose connected to the T go?
It appears to end right above the throttle cable.
why did you plug that vacuum hose? did u take off your emissions?
HELP. Where does the line from the top of the Gearcase go to?
what size are the hoses?
My 49cc moped doesn't seem to have a t shaped tube. Being used for such a long time, It's had work done to remove the emissions system. Is this normal? As of right now I'm trying to fix a "constant cranking but not starting" issue. Is this a vacuum issue?
Check block plate
Why plug the one side of vacuum line?
I have an Eton beamer it's not getting gas through the fuel lines. new lines,new gas, gas tank cleaned, carb cleaned. I have an electric fuel pump that's attached to my gas tank could that be the issue?
Never seen an electric fuel pump on the scooters I’ve owned but there’s multiple ways to check if the fuel is getting to the carb. Key on, undo the fuel line before the fuel filter and see if gas pours out, or with electric fuel pumps you can listen 👂 with your ear close to the gas tank for a whirring sound, it’s brief but you’ll know when you hear it
Hi tks four your video is great tks, is ok to use same pipe size from the petcoke to carburettor air and petrol not have deference or the pipe from air is need to be small tks four you reply Vinnie Berenguer
where do i buy an upgraded version of my fuel lines and fuel pump?
Thank you...
is that line supposed to just hang their with a screw
yes.
@@thersten why ?
@@shannonmcdonough8871 because I said so. And bc that vacuum isn't being used.
it could be capped off at the nipple.
Good job on the video.
U said the first time that the out go to the carburetor then u said the t one go to the manifold and one go to the carburetor
My fuel filter and the fuel pump are very small
Can I replace them for bigger ones ?
I have a Chinese scooter 150cc
Raul Gonzalez it should matter what as long it's say you can use it for 59cc 150cc
Do you mind telling me where you bought this? I am trying to search for replacement parts before my scooter gets delievered and am having a hard time finding parts for it. I am looking for Fuel Lines, Vac Line, Filter (Oil/Gear), NGK Plugs, Free Flow Exhaust, Uni Pod Air Filter, Kehin Carb 118 main jet, tires, and valve stems. Where do I get these parts from?
You can find any parts you need for any of these on eBay.
What sizes do i need for a 50cc?
Fuel n vacoume lines on icebearrocket 50cc
Excellent than
So where does the hose on the rocker cover go?
The top of the head ? The thicker hose ? It is positive crank case ventilation (PCV) and Doesnt really matter as far as the engine running, mine is just hangin out down there when I drive my scooter but you can drill a hole in the air filter and insert the hose in there to recycle the pcv air
I need a video for a 2021 xpro
Hi guys! Can you help me? On my scooter I have this vacuum pump for petrol: www.amazon.com/ROP-Shop-LG808656-M138498-M145667/dp/B07319CFKL
As you can see from the penultimate photo, on one side of the pump, under the word Mikuni, there is a hole. Gasoline comes out of this hole a few times. It's normal? Is it a vent? Or do I have to change the pump?
Thanks
🙌🙌🙌
thanks
I got most parts from scrappydogscooters (dot) com. Fuel and vac line are one and the same. Valve stems and NGK plugs from any auto parts store or scrappydogscooters. Kenda K413 - 130/60R13 tires from amazon (dot) com, select the vendor leatherup (dot) com on amazon. Unsure about exhaust, air filter, carb upgrades--I left these stock.
i go to ebay.
Do u have a fb page
get rid of that fuel petcock. put in an inline valve and an inline filter. I will never put one of them in again.
Your fuel filter is in the wrong spot it should be on the hose connected to tank not after the 3 way valve
you can have more than one filter. they just can't be plugged or too restricted.