The lug under the engine is only there on 200 casings mate, it was to stop vibration breaking the exhaust on the bigger cc motors. The lugs you have are present on all casings, I think they're part of the casting process
@@kickbackgarage thats not correct .spanish casings have the lug on later 125 and 150 casings and its on all gp dl models . ??????? but you will need a full anorak to know exactly when and what models it was introduced on ...... and ive been doing lambrettas since 1979 but im not a f989k ing anorak 😉 i would say it was introduced on series 3 models but what year im not sure ?
Appreciate your vids.. Just about to fit one of these myself and I hadn't thought about removing the paint - great tip and saved me some hassle - thanks.
Nice bonus video Rob. There's always something we have to fettle to make whatever fit lol. Nice easy fit apart from that & looks the part. cheers for the extra vid *****
Thanks for another good vid! Just a tip for you, I have had the kickstart foul the screw on the rear pipe clamp. If you put the clamp on the other way round there is no chance of this and it's a little bit neater.
funny how this has just been posted, i fitted a BGM to my RT195 only yesterday! The barrel stub was very tight and needed a bit of cleaning up before the down pipe would go on. also nice to have a proper spring tool as i've been using screwdrivers and mole grips since forever....!
You're videos is great! I have BGM V2 on my Li150 Series 1. It was a struggle to get that on because of little clearance to the footboard front brackets. And because of that I needed to grind the exhaust engine bracket. V2 have other type of bracket with horizontal slotted holes and you have V4 with vertically slotted holes. Hmm maybe a change of bracket could solve it for me.
I had a V2 a couple of years back and I remember fitting that was a real nightmare! It only lasted 3 months though. The area around the bracket totally disintegrated and BGM refused to warranty it.
Mine still holds together though. Thanks for the information about your experiences with V2. I'll keep that in mind. As a fact I will check next time. I use V2 with imola 186 so maybe there is a difference fitting BGM V2 with that kit.
Rob. Love the video’s. Can you still fit the rear wheel change tool? Looked blocked off. I’m going oing back to the bgm from avanti st with end can as 1. Avanti is loud. 2. Can’t fit the said tool. Question? Is the BGM quieter than the Avanti?. Cheers
Hey mate, love this stuff!! , i have a small block 125li and i am putting an overbored 66mm (has “mm”stamped on it , but it is a smallblock cylinder , it will have with a mild tune and a 24mm jetex, , whats the best standard looking pipe for it? . Are those Indian ebay clubman cheapys junk? . It will not be a high mile machine. Thanks!.
I have the v4 on my ss250. In my opinion the exhaust comes too close to the cowling opening. It almost blocks the airflow. I removed part of the lip where the exhaust is welded together so the airflow is hopefully better. The exhaust got a hole so I had to weld it. On my other lambretta I have a gori ss. The gori give a lot more room around the cowling opening. No airflow is blocked. I hope my ss250 does not overheat because the exhaust too close to the cowling. I would never buy a bgm exhaust ever again.
The lug under the engine is only there on 200 casings mate, it was to stop vibration breaking the exhaust on the bigger cc motors. The lugs you have are present on all casings, I think they're part of the casting process
Fantastic, thanks for clarifying that. in 25 years of messing around with lambrettas, I have only built 200`s until this year.
@@kickbackgarage thats not correct .spanish casings have the lug on later 125 and 150 casings and its on all gp dl models . ??????? but you will need a full anorak to know exactly when and what models it was introduced on ...... and ive been doing lambrettas since 1979 but im not a f989k ing anorak 😉 i would say it was introduced on series 3 models but what year im not sure ?
@@TheSteelweasel Ok, still explains why this early TV hasn`t got the exhaust lug.
@@kickbackgarage the other lugs are from machining process and on all engines .
Cheers Rob, another step closer to completion. Always entertaining and looking forward to the next episode.
Appreciate your vids.. Just about to fit one of these myself and I hadn't thought about removing the paint - great tip and saved me some hassle - thanks.
Nice bonus video Rob. There's always something we have to fettle to make whatever fit lol.
Nice easy fit apart from that & looks the part.
cheers for the extra vid *****
Thanks for another good vid! Just a tip for you, I have had the kickstart foul the screw on the rear pipe clamp. If you put the clamp on the other way round there is no chance of this and it's a little bit neater.
IT clears the kickstart, but if I get any issues, I`ll know where to look. Thanks.
funny how this has just been posted, i fitted a BGM to my RT195 only yesterday! The barrel stub was very tight and needed a bit of cleaning up before the down pipe would go on. also nice to have a proper spring tool as i've been using screwdrivers and mole grips since forever....!
Haha, screwdriver and swearing works too. 😂
I did the same as John , put the tailpipe screw in from behind... looks better and stops any fouling.
You're videos is great! I have BGM V2 on my Li150 Series 1. It was a struggle to get that on because of little clearance to the footboard front brackets. And because of that I needed to grind the exhaust engine bracket. V2 have other type of bracket with horizontal slotted holes and you have V4 with vertically slotted holes. Hmm maybe a change of bracket could solve it for me.
I had a V2 a couple of years back and I remember fitting that was a real nightmare! It only lasted 3 months though. The area around the bracket totally disintegrated and BGM refused to warranty it.
Mine still holds together though. Thanks for the information about your experiences with V2. I'll keep that in mind. As a fact I will check next time. I use V2 with imola 186 so maybe there is a difference fitting BGM V2 with that kit.
@@gnordh I had it on a TS1, normal stroke but remember it was a pig to fit.
Rob. Love the video’s. Can you still fit the rear wheel change tool? Looked blocked off. I’m going oing back to the bgm from avanti st with end can as 1. Avanti is loud. 2. Can’t fit the said tool. Question? Is the BGM quieter than the Avanti?. Cheers
Yes, you can still fit the jack tool. Just pop it in from the innside. And yes! The BGM clubman sport is a LOT quieter than the Avanti ex box.
Nice sir....
Hello Rob, these pipes seem to come with 6 springs, 2 of which are shorter than the rest. Do you know what they are for please? Cheers, Gav.
I have no Idea. I just use the long ones.
@@kickbackgarage Thanks, Rob. It worked ok with just the ling springs?
Yeah fine.
@@kickbackgarage did you have to cut the cylinder cowl to fit the springs please?
If you dont have the bgm head cowl, then yes.
mine came with 6 springs, 4 the longer size, 2 shorter. which two did you not use? thanksfor the video!
The longer
@@kickbackgarage grazie!
Quisiera saber como fabricar el caño de escape que estas mostrando o comprar en Argentina
Keeping busy mate he he
Hey mate, love this stuff!! , i have a small block 125li and i am putting an overbored 66mm (has “mm”stamped on it , but it is a smallblock cylinder , it will have with a mild tune and a 24mm jetex, , whats the best standard looking pipe for it? . Are those Indian ebay clubman cheapys junk? . It will not be a high mile machine.
Thanks!.
What bout something like the scootopia clubman? the price is right on those and from a reputable dealer.
I have the v4 on my ss250. In my opinion the exhaust comes too close to the cowling opening. It almost blocks the airflow. I removed part of the lip where the exhaust is welded together so the airflow is hopefully better. The exhaust got a hole so I had to weld it. On my other lambretta I have a gori ss. The gori give a lot more room around the cowling opening. No airflow is blocked. I hope my ss250 does not overheat because the exhaust too close to the cowling. I would never buy a bgm exhaust ever again.