Thanks for posting. This video was comprehensive enough that I just ordered one for my G26 . Take heart, the world is not getting worse and worse every day. We simply have more immediate sources, and more of them, to hear about every single cause complaint, bullet fired or harsh word spoken.
i got the kydex holster for my g26. if you use the belt clip(which its made for, duh) itll scratch along the top of your gun. i got some soft, thin material and glued it to the inside of the holster over the little rivet caps. kept it from scratching anymore...great other than that. pretty aggressive for the 26 though, unholstering wise. its a super snug fit.
+Sicilan Mike I'll admit that after a little while with no holster out at the time, I or my wife haven't carried it with the light. I recently found a few good options, one from black Arch holsters is probably the route we'll go.
+Jeremiah Bray good question. I think they have different bodies for different frames. I'm not sure about gen 2s...there's always the Dremel if you're brave
Jeremiah Bray it works for the gen 2 19 I'm assuming. If you look up the streamlight tlr-6 on Amazon and go to pictures posted by customers, there's one of a gen 2 23 with this mount. I would assume that it would work for the 19 since the only difference in the 23 is the caliber and some minor internal differences.
Thanks for watching! I believe it's the Pearce Grips Glock 27 +2 extension. I think they also make one that doesn't do any additional rounds but just gives room for your little finger. I also use HYVE extensions now, too. But the Pearce one has been solid and looks factory.
I don't know the dimensions of a P80 lower. If it's exactly the same on the front of the trigger guard, then yes. But also, I imagine you could modify the P80 lower to match the contour with some skill. The TLR6 is molded to exactly fit the G26/27 lower.
Hey, not yet. We still don't have our carry permits in this state as it requires even more than where we were in New York. LMK if you find anything! I've always heard good things about these guys, and I wonder if they'd do a custom kydex. ua-cam.com/users/PhillyEDC
Check out Alien gear holsters !!! they have removable shells and one holster will work for many guns i swear by mine!!!! what the best way to sight in laser on this model i have one for my performance center shield 40 aliengearholsters.com/
+rincon3315 I ordered a custom leather holster for the Glock 27 with the TLR6 attached from Wright Leather Works. But the lead time is currently 10-12 weeks.
Hey, good question. I guess it depends on the trigger guard width and frame size. I don't know if it's any wider being a .45. Here's some documentation from Streamlight, if it helps: www.streamlight.com/static/document/fact_sheet_for_tlr-6_(glock_26,_27_or_33_model)/270.pdf
This is a four but they're identical for mounting accessories. Only grip texture and recoil spring and possibly slide chamfer are different between 3+4 if i remember correctly.
I don't think so. From what I understand is that the P80 trigger guard is different, at least on the larger frames, and won't fit normally. I'll bet a little dremel work on it would do the trick, but that might be more trouble than it's worth for this light...and unsightly.
A quick search on the Glock website seems to show different widths of the slide at least, so I can't say. My guess is no, or maybe, but I don't have a G30 to compare.
Hey Leann, I'd assume the Gen 3 as well as the Gen 4 as the only changes, that I'm aware of, are the grip textures, interchangeable grip panels and recoil spring assembly - the frame itself is basically the same. Here's the Streamlight Glock fact sheet: www.streamlight.com/static/document/fact_sheet_for_tlr-6_(glock_26,_27_or_33_model)/270.pdf I hope you find what you're looking for!
Is it the right one for the G26/27? Stream light had several versions of enclosures for different platforms if I remember correctly. Mine is a Gen 4 27. Still use it to this day.
@@goldsun2524 This should be it? I don't see any documentation anywhere (in a search) about it fitting a certain generation over another. Did you buy it used? www.bhphotovideo.com/c/product/1487836-REG/streamlight_69282_tlr_6_non_laser_weapon_mounted_white.html
Thanks for the advice! The video quality of these older videos is what it is. Trying to improve, and every piece of advice helps so sincerely thanks and thanks for watching.
What would be an upgrade to this light on a Glock 27. 100 lumens seems so terrible for the price. For $90, you can get Olight PL-Mini 2 Valkyrie taht has 600 lumens and 100 meter throw but it won't fit on the gen 3's unfortunately.
I'd go with an Olight. Streamlights definitely seem to have lower lumens at the price points they offer. Great quality, though. I have a bunch of Olights and love them.
Hey, sorry for the late response. That's a really interesting question. I just compared the trigger guard profile on my gen 4 27 and gen 3 23 and they're identical apparently. Gen 1 and 2 don't have the glock rail, so it might! No guarantees here, though. This is Streamlight's fact sheet for Glocks. I don't think they're marketing it for the older pistols, but it would surprise me if it did if the trigger guard profile is the same. I would think that the frame in the front has a different profile, so it might not be a perfect fit. Let me know if you try it out, I'd be interested to see if it did or not. Other than that, sorry, I don't have access to the older frames to try it out. Good thinking, though. www.streamlight.com/static/document/fact_sheet_for_tlr-6_(glock_26,_27_or_33_model)/270.pdf
video made 4 years ago, and there's still 1 thing he said that 100% hasn't gotten better. it's that people are getting crazier and the world gets worse every day. ian even that typa person to think of it like that but this world is getting hella fucked up😭 no kizzy
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Thanks for posting. This video was comprehensive enough that I just ordered one for my G26 . Take heart, the world is not getting worse and worse every day. We simply have more immediate sources, and more of them, to hear about every single cause complaint, bullet fired or harsh word spoken.
Very well said. We are in the most peaceful time in human history contrary to what the news would have you believe.
Badass guns and good video! Not sure why so many people hate on the .40 cal
Cause they can't handle the extra bang also 9 is so much more abundant plus it's a much more flexible round
That Glock 26 with the tlr 6 and a extended magazine would look nice
Miriam veloz literally what I got
@@WHOISWHOX1 I do, too... plus, TFX Pro’s 👍
awesome, got me a Glock 27 .40 need this stremlight for sure... thanks for the instructions. God bless!
Excellent choice. I still carry my G27 at least twice a week. Glad I could help a little bit!
I'm getting one of these! I like the way it makes the Glock look once it's installed too.
Exactly the review I was looking for, thanks boss
+zachary293293293 Awesome. Glad it was helpful.
Same here!
Gonna grab one for my g27 gen 4 😀
Love it!
Lol, Jurassic Park reference. Thanks for the review, I'm buying one for my 26.
Don't forget to clean the lazer and light lens when cleaning the weapon after going to the range as they get clouded up.
They sure can.
glad to see the tlr6 actually fits on the 26! this is an excellent option. hows yours holding up?
So far, so good. We have yet to find a holster for it, but I haven't looked recently.
www.glockstore.com/Molded-Kydex-Holster-for-G26-27-with-TLR-6
i got the kydex holster for my g26. if you use the belt clip(which its made for, duh) itll scratch along the top of your gun. i got some soft, thin material and glued it to the inside of the holster over the little rivet caps. kept it from scratching anymore...great other than that. pretty aggressive for the 26 though, unholstering wise. its a super snug fit.
@Kyle Reyes Thanks Kyle!
Tier 1 is a great option too
Im excited mine will coming in the mail any minute now i am waiting on the mail lady as we speak
Nice I'm thinking about a G26. New sub by the way. Is the light still holding up.
I’m gonna get one for my model 27, then I’ll have to shop holster options
how do you like it so far? any problems with the battery door popping open?
+Sicilan Mike I'll admit that after a little while with no holster out at the time, I or my wife haven't carried it with the light. I recently found a few good options, one from black Arch holsters is probably the route we'll go.
Doulos ok thanks. Good luck with it. I'm thinking about picking one up.
Is there any reason this wouldnt work on a gen2 19?
+Jeremiah Bray good question. I think they have different bodies for different frames. I'm not sure about gen 2s...there's always the Dremel if you're brave
Jeremiah Bray it works for the gen 2 19 I'm assuming. If you look up the streamlight tlr-6 on Amazon and go to pictures posted by customers, there's one of a gen 2 23 with this mount. I would assume that it would work for the 19 since the only difference in the 23 is the caliber and some minor internal differences.
Great video! What mag extender are you using?
Thanks for watching! I believe it's the Pearce Grips Glock 27 +2 extension. I think they also make one that doesn't do any additional rounds but just gives room for your little finger. I also use HYVE extensions now, too. But the Pearce one has been solid and looks factory.
@@WildMountainGarage Thank you! Right on! Not sure I need the +2, is it legal in California?
since it doesn't alter the shape of the glock any..will it fit in my current iwb holster? or would I have to purchase new holster?
I'm going to bet you'll need a new holster, unless your current holster has spare room between the trigger guard and bottom of the frame.
I'm trying to find a holster to conceal but can't find any videos.
Black arch made a good one, try some reputable companies and videos for other firearms.
Can this fit a p80 26?
I don't know the dimensions of a P80 lower. If it's exactly the same on the front of the trigger guard, then yes. But also, I imagine you could modify the P80 lower to match the contour with some skill. The TLR6 is molded to exactly fit the G26/27 lower.
Would this work on a glock 26 BB gun replica?
It depends on how close the replica mold is to a real Glock. With enough effort and a dremel anything might fit. :-)
Amen God bless you sir great video
Thanks! Glad you got something out of it.
Is it able to have the light and laser on at the same time light when its night time outside?
Yes. One (either) or both on. You can turn it on 24 hours a day.
Where did you order this from Amazon ?
Probably not available anymore on Amazon. I can't remember if I ordered this or got it through work as we were working with Streamlight at the time.
Does streamlight make a green laser without flashlight, For the G 26/27?
I have not seen any, only red. I stopped keeping track on streamlight as of late, though. So don't quote me.
Hey brother did u get a holster for it? I got the light searching for holsters now.. just wondering
Hey, not yet. We still don't have our carry permits in this state as it requires even more than where we were in New York. LMK if you find anything! I've always heard good things about these guys, and I wonder if they'd do a custom kydex. ua-cam.com/users/PhillyEDC
Check out Alien gear holsters !!! they have removable shells and one holster will work for many guns i swear by mine!!!! what the best way to sight in laser on this model i have one for my performance center shield 40
aliengearholsters.com/
Jon Preece thanks brother!!
I use a crossbreed snap slide owb for mine but they have iwb of course as well. I think it was around $50 with shipping
Alien Gear they got EVERYTHING you NEED!!! I love mine.
Steamlight TLR-6 and Standard Glock sights....🤔
Was this lazer easy to sight ?
Yep!
How do you zero it
There are little windage and elevation screws.
Does the TLR-4 fit in a holster ?
I have it in a Black Arch holster. It's worked great for years!
Will it fit with the Glock 26 gen 5?
I can't say for sure, but I don't think there's any change to the rail or trigger guard since Gen 2.
Does this fit tokyo Marui Glock 26 ?
If it's the same as a real Glock dimensionally, it should.
Will it fit a polymer 80 frame?
That I don't know. I don't think the polymer 80 has the same shape/dimensions, but that being said I think there were a couple of TLR-6 models.
what pink extension is that on the 27
Pearce Grips - pinky extensions and + round extensions. OE quality feeling.
U know of a holster that I can find for G26/27 with TRL6 appendix carry?
I would check cooks holster.
+pollock56th Thanks for the tip!
+rincon3315 I ordered a custom leather holster for the Glock 27 with the TLR6 attached from Wright Leather Works. But the lead time is currently 10-12 weeks.
What model is that mag extension?
Dennis Chang Pierce pinky extension. Doesn't add any round, but you can get a +2 for the 27 and +3 for the 26.
When will these be available again?
Good question. Sorry to hear they're not!
By any chance does the tlr-6 fit on the glock 36?
Hey, good question. I guess it depends on the trigger guard width and frame size. I don't know if it's any wider being a .45. Here's some documentation from Streamlight, if it helps: www.streamlight.com/static/document/fact_sheet_for_tlr-6_(glock_26,_27_or_33_model)/270.pdf
BladeKing124 It doesn't. This only for 9mm, .40s&w and .357 sig model glocks as they are all the same width.
For gen 3 or gen 4 ?
This is a four but they're identical for mounting accessories. Only grip texture and recoil spring and possibly slide chamfer are different between 3+4 if i remember correctly.
Will this work on a subcompact p80
I don't think so. From what I understand is that the P80 trigger guard is different, at least on the larger frames, and won't fit normally. I'll bet a little dremel work on it would do the trick, but that might be more trouble than it's worth for this light...and unsightly.
@@WildMountainGarage Thanks. I will have to find something else.
Will it fit a glock 30 gen 3 ?
A quick search on the Glock website seems to show different widths of the slide at least, so I can't say. My guess is no, or maybe, but I don't have a G30 to compare.
🔥
No green lasers ??!
I don't know. I prefer red. Green doesn't stand out for me.
Next purchase
Dope!
Does this fit both the gen 3 and gen 4 glock 27? What model number is it? The 69272? Just double checking, thanks for the video :)
Hey Leann, I'd assume the Gen 3 as well as the Gen 4 as the only changes, that I'm aware of, are the grip textures, interchangeable grip panels and recoil spring assembly - the frame itself is basically the same. Here's the Streamlight Glock fact sheet: www.streamlight.com/static/document/fact_sheet_for_tlr-6_(glock_26,_27_or_33_model)/270.pdf I hope you find what you're looking for!
what holster do you use for this setup?
the glock store has a kydex holster for the tlr6 26/27/33 as well.
It's not fitting my glock 27 gen 3 why?
Is it the right one for the G26/27? Stream light had several versions of enclosures for different platforms if I remember correctly. Mine is a Gen 4 27. Still use it to this day.
@@WildMountainGarage I don't think it's the right one. I'm trying to find one but I cant find it
@@goldsun2524 This should be it? I don't see any documentation anywhere (in a search) about it fitting a certain generation over another. Did you buy it used? www.bhphotovideo.com/c/product/1487836-REG/streamlight_69282_tlr_6_non_laser_weapon_mounted_white.html
We only see your hands on camera so other time put camera at the top
Thanks for the advice! The video quality of these older videos is what it is. Trying to improve, and every piece of advice helps so sincerely thanks and thanks for watching.
What would be an upgrade to this light on a Glock 27. 100 lumens seems so terrible for the price. For $90, you can get Olight PL-Mini 2 Valkyrie taht has 600 lumens and 100 meter throw but it won't fit on the gen 3's unfortunately.
I'd go with an Olight. Streamlights definitely seem to have lower lumens at the price points they offer. Great quality, though. I have a bunch of Olights and love them.
Only 1 min of 600 lumen with olight
Would the tlr6 fit on a gen 1 or 2 g17/19?
Hey, sorry for the late response. That's a really interesting question. I just compared the trigger guard profile on my gen 4 27 and gen 3 23 and they're identical apparently. Gen 1 and 2 don't have the glock rail, so it might! No guarantees here, though. This is Streamlight's fact sheet for Glocks. I don't think they're marketing it for the older pistols, but it would surprise me if it did if the trigger guard profile is the same. I would think that the frame in the front has a different profile, so it might not be a perfect fit. Let me know if you try it out, I'd be interested to see if it did or not. Other than that, sorry, I don't have access to the older frames to try it out. Good thinking, though. www.streamlight.com/static/document/fact_sheet_for_tlr-6_(glock_26,_27_or_33_model)/270.pdf
video made 4 years ago, and there's still 1 thing he said that 100% hasn't gotten better. it's that people are getting crazier and the world gets worse every day. ian even that typa person to think of it like that but this world is getting hella fucked up😭 no kizzy
Terrible camera angle. You can't see what he does. Did he even watch this before he posted it? All you see is his hand.