I don't know much about water heaters.. but after watching this video, I now know about the "Breaker switch". Pilot light wouldn't stay lit no matter how long I held it.. until i watched this video. Clicked the breaker switch in & gave it a try, the status light came on like it should. Thanks for the info! 👍🏼
Excellent video! Just what I needed to convince me the thermopile was bad even though it showed reasonable micro volts. $27 kit from Amazon and less than an hour to replace the parts and the heater started up perfectly. The Honeywell control valve showed the red light blinking, but it would fade out and then come back on, and then off. It also showed the 2 blinks which the chart on the control says is a bad thermopile. Thanks again for a great, well-done video!
Which part did you order? Do you have a link? Another question may be: If there is more than one part, how would I check to make sure I get the correct one?
I got the same issue. That thermocouple that I bought from grainger was universal. So my father in law who’s also a handy man helped me do the work. My issue was the burner didn’t wanna kick in. So we changed the thermocouple but they don’t carry the original part as SEARS went out of business. But after changing the thermocouple, now the damn pilot light won’t stay on. Can anybody help?
I pressed the reset button on the right side heat gauge stick and that worked. That was after I watched another video which had me disconnect everything and take the whole burner out and clean it. All that did not work but the little button reset did. Thank you!
This has performed exactly as desired ua-cam.com/users/postUgkx8G49mV71sAzUl9shXyLW-r3XgHH9EVh1 . Basically, instant hot water instead of waiting up to two minutes as it was before. I have had this installed almost exactly one year now and just replaced the anode which is pictured. I pulled it out at six months and cleaned the heating element and removed debris. I would recommend a cleaning every six months and an anode replacement yearly. A mild citric acid and water solution soak really helps clean the heating element and tank. It must be fully disassembled to do the cleaning and that is not difficult but could have been made easier with a couple of design changes but no big deal.
It turns out the issue with my water heater was with the thermal switch breaker. I had never encountered that before, so it was unfamiliar to me. Thank you for directing me to the button.
For those who replaced the thermocouple and still won’t lit the status light it is the little breaker switch. At least it was for me. Great video. Many thanks from a new homeowner.
thanks bro! The tip that saved me was the little black breaker button on the the thermo switch. It had "thrown". The interesting thing is that it's not visible and on the reset, it doesn't actually move...but you can feel a tiny click. If you aren't actually "feeling for it" you might miss it or assume that breaker was not the issue. It was. To put it into song lyrics.... "I've had the time of my life No, I never felt like this before Yes, I swear it's the truth And I owe it all to you". Love it when people help each other
Man, you just saved me. I've spent the past 24 hours trying to fix my water heater. No light, no flame. I went out at 8pm and got a thermocouple, got home and it was the wrong one. Ended up buying the right one and picked up in store today on my lunch break. Got home, installed the entire assembly, no flame. Took it apart, checked it, still nothing. I'm ready to admit defeat and call a plumber, I keep scouring the internet for answers and read your answer.... I googled "Honeywell water heater thermostat breaker button" and found it... One tiny little black button. I pressed it and the thing fired right up. Thankyou for the reply because it just helped me out.
Next time, get paper clip, or some T-pins and (back probe) press them up into that connector at the unit so that you can test it while it's under load. You can have sufficient voltage, but once you put a load on it, it will drop significantly. I'm sure everyone has seen it at least once: when you're in a car and everything is working, all the lights are on; but when you go to crank the starter, EVERYTHING goes dead. That's simply because the battery was basically dead and as soon as you try to pull any real current, the voltage plumets. So again, don't just test it on an open circuit; test it while it's plugged in and under load. Cheers.
@@itomburgess Yeah, the newer kind are called "thermalpile"- because they have several thermal couples built into one, on the inside. So one or two of those internal thermal couples can go bad and drop your current flow too low, even though the voltage still reads fairly high. I think mine lasted 8 or 10 years. Not too bad; a new one fixed it- hopefully for another 10 years.
@@itomburgess Yes. that is most likely what is wrong. But I also had a second issue with mine. The light was giving a 4 blink code. and then it was giving a 7 blink code. So I pulled off the panel. And a little piece fell out.... My wire was so hard to unhook, I think I pried and wiggled it a little too hard, and I broke a little piece off of the board on the inside.... If you pull off the panel cover, and slide the board off of those 3 pins you can see what I'm talking about. Those 3 pins that stick out from the gas valve are like wires, and they are connected to the valves inside. That's how the board is controlling the valves. So anyway, those little pins pass through holes in the board and they slide through these pyramid shaped contacts, that grip around the pin so electricity can pass through it... Well one of those "pyramid" connectors had broken off; luckily I didn't lose it when I pulled the cover off. So have a tray or a mat under your plastic cover when you pull it off, just incase those broken pyramids fall out. So I had to solder it back on, and it wasn't easy. Otherwise if your board is broken, you'll have to buy a new one- which I believe is like $150 or something crazy. But you can fix it with a simple soldering iron. I had a thick staple or trim nail and I slide it through the board and slide that pyramid over it so that it would be aligned correctly, and I managed to solder it pretty well. It took me like an hour to figure out how to get it soldered back on there. Kinda tricky. I'll send you a video that shows you how to check the valves with a 9v battery and make sure they are working. (which they most likely will be). I'll link the video in the next reply, but just in case it deletes it: The video's exact name is: "4 flash error code reset diy how to reset"
@@itomburgess Here is a second video that helped me learn how to reset the board. I never needed to do it once I resoldered my broken piece (and replaced the thermalpile). But most likely you will just have to get a new thermalpile, because that's the most common issue with these. I ended up getting a whole new kit: that's the thermal pile, pilot and ignitor. You can get away with just getting a cheap thermal pile though, like at harbor fright or lowes. Just take yours in and make sure it's the same one. Anyway, I'll link it next, but just in case it gets deleted: here's the name of the second video with info you probably don't know, cheers: "Fixing Honeywell water heater pilot light, won't start, system reset."
Ok love the video but had same problem check the connection where the wire that is under the button where u push to start it that male and female connection plastic thing where u can pull apart is tight it was loose I just pinched the female part a little bit and reconnected it and it started right away
We have an Electric Water Heater now (no Natural Gas service and Propane is way too expensive), so thankful for one thing I don't have to deal with. I know several people that have had nothing but problems with those "new" controllers for Gas Water Heaters. You need the thermopile to generate enough power to get that stupid Status Light and the associated electronics that monitor other things to work. Like everything else much simpler with straight thermocouple and valve and in my opinion just as safe....but I'm old. BTW, what the heck kind of Warranty requires you to pay $100 plus parts? Sure, something is buried in the fine print about that but still.
Part of the reason we didn't use Sears warranty was because the customer service was/is non existent. When we finally got a hold of a live person it was hard to deal with him because of the thick Indian accent and he was rude. The main reason we bought this Kenmore was Sears was once very good at customer service. 5 years ago they came out for free and said the tank was bad on my previous unit. They were going to charge me for install but I declined and just went to sears, picked up a new unit for no charge and installed it myself. It's shocking how bad customer service has gotten over the past 10 years or so. What's even more shocking is that people tolerate it.
My pilot will only light long enough for the burner to kick on and heat up the tank one time. Then goes out. Once the tank is cool again i can repeat. Water heater is a year old......
All of my Kenmore appliances (3) have failed or are failing. I really deeply regret investing in them. Their service number/website/chat is a big circle jerk that leads nowhere. Good luck talking to a real person.
I'm a plumber. Lemme watch this. Maybe I can help. Stand by. You got it. Now you know for next time. Sometimes just cleaning that thermopile gently, is enough. Now that you cleaned it out. You did the maintenance that will help it last ten years longer.
Have you ever seen one that produces 700mv and still wont power the gas valve? I watched hours of YT vids and everyone was saying that if it produced 400-750mv the thermopile was good. I'm still baffled.
i watched a lot of ytube videos in an attempt to get my water heater issue solved. I never knew about that tiny breaker switch. Your video was the only one that mentioned and pointed it out. This was my culprit. Thank you!!
I'm right there with the cold shower now for three weeks... 🥶 Thanks for sharing your journey. Thermol pile. I'm trying next. Wish I had a man to do, but I don't... So here I go. 🧐🤨
Dude thank you for showing me where that thermal switch breaker is! I kept reading there was a breaker to check but I didn’t realize the little black plastic was it. I am up and running thanks to you. Liked and subscribed.
My problem didn't end up being the same as yours, but the way that you broke down the diagnostic steps helped me find the problem along the way. The mark of a great video. Thanks!
Sounds like the problems I am having. They all look the same also. My filters are on the side. Now were you quoting that famous Hee Haw song, Gloom despair and agony on me. LOL
Had the same problem. Volt meter said the thermopile was good. Installed new thermopile after watching your video and now have hot water. Thanks a bunch.
Dude stop. Simply get rid of this gas panel. These panels are nothing but problems. An those thermo piles are never available in stores. Switch out that valve with a regular gas valve with no self lighting ignitor. These new gadgets are no good. Stick to the old gas open pilot set ups
Thermal couple or thermal pile need to be tested under load to make sure it works properly. Also, dont need teflon tape of flared fittings and make sure your cold water supply goes in on right side.
My stupid WH would not light, all I did was pull out the burner, rotate the thermopile 180 degrees (these get fouled by black soot very easily) stuck it back in and it fired up the first time ;)
Yes, I didn't elaborate in the video but Sears gave us the runaround on the phone. It took us 2 days to get a hold of a live person and that person had a very thick Indian accent. They were incapable of understanding our issue, they just wanted to send a service tech and charge me for diagnostic work that I already performed. I get it that they would need to verify my findings but the way they treated us on the phone was very rude. Used to be a store, I could go talk to the techs and they would take care of the issue, but now it's someone from India who doesn't give a darn. I wont be buying anything else from them.
Thank you VERY much. Very helpful information. I took an extremely cold shower last night because I couldn't figure out what was going on. I thought the same thing. How did they do it back in the old days??? LOL. Thank you again Sir. What's odd is after watching this video I made another attempt to light the pilot after doing a reset per another video i watched and it work! I will change the part you mentioned if this happens again.
Can this happen to brand new one i just install mines today and i can get the light to turn on same thing happen to my old one after 2 to 3 years light turn off and we tried restarting it turning it off wait 5 minutes hold pilot try to ignite wait till it lights up but fire and light never turn on only probably sparks from just trying to ignite it but dammn . So tomorrow im just going return and get it replaced
They entire tray that u pull out with the burner and thermopile and switch connected to it, do u know what that is called and if I can buy the entire tray in one piece?
Maybe even tho it was testing good I’ve seen videos where they said you have to clean off the actually connect part of the wires and where they connect.
Oh wow, I'm going through the same thing, taking cold showers 🚿 I be hollin. OMG. A single woman 🤦♀️looking for someone to fix it. Well just know it's not comfortable 😕
...and girls! Thank you for providing the ONE video that answered ALL my questions and helped me fix our cold shower dilema! Ive liked and subscribed so PLEASE; KEEP EM COMING!
I can not get the larger gas line disconnected. I've tried beating on the end of the wrench with a hammer but it will not come loose. Should I try heating it with flame?
I have this exact 40 gallon heater from Sears since March 2012. I've had the gas valve replaced twice to date. I have a Master Protection Agreement with Sears, so I never had to pay anything out of pocket. I can't re-light the pilot at all. I had to call Len the Plumber to replace a leaking Temperature and Pressure relief valve on Saturday because Sears had no available techs. Two days later my pilot goes out. I'm hopeful, they can fix it this Friday and give me a little time to save up for replacement. I'm not mechanically inclined nor do I have the testing equipment so I can't do the work.
Same. Installed the short fat, had to change plumbing atop. Had to use plumber. Thought he was gonna credit me for the other heater. Did not. But dsame thing with original heater manufacturer. Would take 2 weeks, have to pay etc
It probably was the connection. Really easy for even a slightly dirty/loose/poor connection to supply inadequate voltage/current to the intended device when the the voltage in question is coming from a very low-voltage/current source.
you just saved me $425 specifically the little black breaker button on the thermo switch. I had a repairman scheduled to come out to "fix" it and now dont need him
In my case the culprit has always been the valve itself. It seems like Honeywell puts a kill-switch to go bad every three years. Just replaced mine with a brand called Residio from Ace hardware. They are not worth a damn.
Thanks for sharing! I bought a brand new $600 water heater put it in and this same thing happened! My tenants need hot water so I went and tried to return it to lowes for a refund or an exchange! They wouldn’t do it! I had to call the manufacture I guess I was supposed to leave it installed and have it inspected by there guy! I had to buy another one ( from Home Depot this time) I really don’t think that’s right for me to get stuck buying a dead horse and a full day of my time and aggravation to boot! I’m not making my tenants wait til next month when the company can look at it any advice? Thanks
My electronic parts were reading correctly, thermal switch has continuity and measures the correct millivolts. So I tried replacing the thermopile anyway and it didn't help. I think its a faulty circuit board which is even easier to replace
Replacing the circuit board fixed the problem. Thank you for all of your info. It definitely helped me figure out troubleshoot! this was also helpful ua-cam.com/video/cAo4I2eoJ9Q/v-deo.html
Thanks man! that little black button switch on the thermopile keeps popping back out. it will go out about once a day and Ill push that little button back in and it will fire right up. Ordering a new one tonight! lol
it's that little black connector. somehow the pins don't make good contact with the connector on the valve. there is some way to manipulate them to grip the valve contacts but it's probably only temporary. replacing the thing like you did is the way to go for sure. nice job!
I watched other videos, found no help. I watched your video and now I have hot water. Thank you!
Did you replace the burner?
I was about to order the part but your video saved me alot of money that i didn't even had !!!! Thanks alot 🎉
I don't know much about water heaters.. but after watching this video, I now know about the "Breaker switch". Pilot light wouldn't stay lit no matter how long I held it.. until i watched this video. Clicked the breaker switch in & gave it a try, the status light came on like it should. Thanks for the info! 👍🏼
^^what they said! Same here
Same, I fixed it! The breaker switch! Thank you!
Where’s the breaker switch
My light's blinkin, Secretary Blinkin! but the pilot goes out soon as I release the button. Gotta re-diagnose. This is a golden thread.
Excellent video! Just what I needed to convince me the thermopile was bad even though it showed reasonable micro volts. $27 kit from Amazon and less than an hour to replace the parts and the heater started up perfectly. The Honeywell control valve showed the red light blinking, but it would fade out and then come back on, and then off. It also showed the 2 blinks which the chart on the control says is a bad thermopile. Thanks again for a great, well-done video!
Which part did you order? Do you have a link? Another question may be: If there is more than one part, how would I check to make sure I get the correct one?
I got the same issue. That thermocouple that I bought from grainger was universal. So my father in law who’s also a handy man helped me do the work. My issue was the burner didn’t wanna kick in. So we changed the thermocouple but they don’t carry the original part as SEARS went out of business. But after changing the thermocouple, now the damn pilot light won’t stay on. Can anybody help?
I pressed the reset button on the right side heat gauge stick and that worked. That was after I watched another video which had me disconnect everything and take the whole burner out and clean it. All that did not work but the little button reset did. Thank you!
This has performed exactly as desired ua-cam.com/users/postUgkx8G49mV71sAzUl9shXyLW-r3XgHH9EVh1 . Basically, instant hot water instead of waiting up to two minutes as it was before. I have had this installed almost exactly one year now and just replaced the anode which is pictured. I pulled it out at six months and cleaned the heating element and removed debris. I would recommend a cleaning every six months and an anode replacement yearly. A mild citric acid and water solution soak really helps clean the heating element and tank. It must be fully disassembled to do the cleaning and that is not difficult but could have been made easier with a couple of design changes but no big deal.
It turns out the issue with my water heater was with the thermal switch breaker. I had never encountered that before, so it was unfamiliar to me. Thank you for directing me to the button.
I just live it man, thanks… straight to the point… very very very good video
5:39 , you’re killing me Smalls!!!!!
Got my hot water to work again. Turns out I needed to push that button to get my pilot light to stay on. Saved $$$. 🤓
For those who replaced the thermocouple and still won’t lit the status light it is the little breaker switch. At least it was for me. Great video. Many thanks from a new homeowner.
Is the little breaker switch the white plug with black button?
Thanks that's what I'm gonna try next
Man. I hit that little black reset button and fired it right up! Thank you.
EXCELLENT ! Very helpful. I Love the way you explained VERY DETAILED.
KEEP IT UP.
thanks bro! The tip that saved me was the little black breaker button on the the thermo switch. It had "thrown". The interesting thing is that it's not visible and on the reset, it doesn't actually move...but you can feel a tiny click. If you aren't actually "feeling for it" you might miss it or assume that breaker was not the issue. It was. To put it into song lyrics....
"I've had the time of my life
No, I never felt like this before
Yes, I swear it's the truth
And I owe it all to you".
Love it when people help each other
Yeah. Exactly the same thing happened with mine.
Man, you just saved me. I've spent the past 24 hours trying to fix my water heater. No light, no flame. I went out at 8pm and got a thermocouple, got home and it was the wrong one. Ended up buying the right one and picked up in store today on my lunch break. Got home, installed the entire assembly, no flame. Took it apart, checked it, still nothing. I'm ready to admit defeat and call a plumber, I keep scouring the internet for answers and read your answer.... I googled "Honeywell water heater thermostat breaker button" and found it... One tiny little black button. I pressed it and the thing fired right up. Thankyou for the reply because it just helped me out.
You are a true Blessing from God for me today. It was the mini breaker. Didn’t even know it existed until you said it. ❤
I never SEEN a heater new enough to be so equipped.
For me, it was just my little micro-breaker. Thanks for calling it out!
I have that same valve but it also has a conventional copper thermocouple to the pilot.
You ben ta hell and back. Good suggestions.
thank you. you just saved me a shit ton of money lol
Next time, get paper clip, or some T-pins and (back probe) press them up into that connector at the unit so that you can test it while it's under load. You can have sufficient voltage, but once you put a load on it, it will drop significantly. I'm sure everyone has seen it at least once: when you're in a car and everything is working, all the lights are on; but when you go to crank the starter, EVERYTHING goes dead. That's simply because the battery was basically dead and as soon as you try to pull any real current, the voltage plumets. So again, don't just test it on an open circuit; test it while it's plugged in and under load. Cheers.
@@itomburgess Yeah, the newer kind are called "thermalpile"- because they have several thermal couples built into one, on the inside. So one or two of those internal thermal couples can go bad and drop your current flow too low, even though the voltage still reads fairly high. I think mine lasted 8 or 10 years. Not too bad; a new one fixed it- hopefully for another 10 years.
@@itomburgess Yes. that is most likely what is wrong. But I also had a second issue with mine. The light was giving a 4 blink code. and then it was giving a 7 blink code. So I pulled off the panel. And a little piece fell out.... My wire was so hard to unhook, I think I pried and wiggled it a little too hard, and I broke a little piece off of the board on the inside....
If you pull off the panel cover, and slide the board off of those 3 pins you can see what I'm talking about. Those 3 pins that stick out from the gas valve are like wires, and they are connected to the valves inside. That's how the board is controlling the valves.
So anyway, those little pins pass through holes in the board and they slide through these pyramid shaped contacts, that grip around the pin so electricity can pass through it... Well one of those "pyramid" connectors had broken off; luckily I didn't lose it when I pulled the cover off. So have a tray or a mat under your plastic cover when you pull it off, just incase those broken pyramids fall out. So I had to solder it back on, and it wasn't easy. Otherwise if your board is broken, you'll have to buy a new one- which I believe is like $150 or something crazy. But you can fix it with a simple soldering iron.
I had a thick staple or trim nail and I slide it through the board and slide that pyramid over it so that it would be aligned correctly, and I managed to solder it pretty well. It took me like an hour to figure out how to get it soldered back on there. Kinda tricky. I'll send you a video that shows you how to check the valves with a 9v battery and make sure they are working. (which they most likely will be).
I'll link the video in the next reply, but just in case it deletes it:
The video's exact name is:
"4 flash error code reset diy how to reset"
@@itomburgess Here is a second video that helped me learn how to reset the board. I never needed to do it once I resoldered my broken piece (and replaced the thermalpile). But most likely you will just have to get a new thermalpile, because that's the most common issue with these. I ended up getting a whole new kit: that's the thermal pile, pilot and ignitor. You can get away with just getting a cheap thermal pile though, like at harbor fright or lowes. Just take yours in and make sure it's the same one.
Anyway, I'll link it next, but just in case it gets deleted:
here's the name of the second video with info you probably don't know, cheers:
"Fixing Honeywell water heater pilot light, won't start, system reset."
@@itomburgess Here is the link to the second video-- which I'd be shocked if youtube doesn't delete it. ua-cam.com/video/GkkkLOdmXwU/v-deo.html
Ok love the video but had same problem check the connection where the wire that is under the button where u push to start it that male and female connection plastic thing where u can pull apart is tight it was loose I just pinched the female part a little bit and reconnected it and it started right away
Omfg!! What’s the issue!!! I dont care what u did and didnt do!! How do i fix this shii!! Stop yapping!!
How many volts was the new thermal pile measuring.
This video saved the day for me! Thanks for the info
We have an Electric Water Heater now (no Natural Gas service and Propane is way too expensive), so thankful for one thing I don't have to deal with. I know several people that have had nothing but problems with those "new" controllers for Gas Water Heaters. You need the thermopile to generate enough power to get that stupid Status Light and the associated electronics that monitor other things to work. Like everything else much simpler with straight thermocouple and valve and in my opinion just as safe....but I'm old. BTW, what the heck kind of Warranty requires you to pay $100 plus parts? Sure, something is buried in the fine print about that but still.
Part of the reason we didn't use Sears warranty was because the customer service was/is non existent. When we finally got a hold of a live person it was hard to deal with him because of the thick Indian accent and he was rude. The main reason we bought this Kenmore was Sears was once very good at customer service. 5 years ago they came out for free and said the tank was bad on my previous unit. They were going to charge me for install but I declined and just went to sears, picked up a new unit for no charge and installed it myself. It's shocking how bad customer service has gotten over the past 10 years or so. What's even more shocking is that people tolerate it.
Yeah electric water heater and a back up generator is the way to go. Gas heaters have become a racket.
I wouldn't be able to take the aggravation. With us being good friends and all, I'm just gonna call you.
It tested my patience to the max, but at least I know how to completely rebuild a water heater now.😆
None of the other videos mentioned that little black switch. That fixed it for me. Thank you.
nothing new you were on the wrong channel the combustion chamber over heat is common fault as we can see in the comments very common
My pilot will only light long enough for the burner to kick on and heat up the tank one time. Then goes out. Once the tank is cool again i can repeat. Water heater is a year old......
All of my Kenmore appliances (3) have failed or are failing. I really deeply regret investing in them. Their service number/website/chat is a big circle jerk that leads nowhere. Good luck talking to a real person.
I have similar problems but the pilot light doesn’t stay on every time I release it goes off
I'm a plumber. Lemme watch this. Maybe I can help. Stand by.
You got it. Now you know for next time. Sometimes just cleaning that thermopile gently, is enough.
Now that you cleaned it out. You did the maintenance that will help it last ten years longer.
Have you ever seen one that produces 700mv and still wont power the gas valve? I watched hours of YT vids and everyone was saying that if it produced 400-750mv the thermopile was good. I'm still baffled.
@@ricksimon4822 No, I just installed it. I should have but didn't think about it.
i watched a lot of ytube videos in an attempt to get my water heater issue solved. I never knew about that tiny breaker switch. Your video was the only one that mentioned and pointed it out. This was my culprit. Thank you!!
I'm right there with the cold shower now for three weeks... 🥶 Thanks for sharing your journey. Thermol pile. I'm trying next. Wish I had a man to do, but I don't... So here I go. 🧐🤨
That microfuse.Thay was my problem. Thank you for the video and thanks to the comments for pointing it out!!!
Where is the microfiber located
Dude thank you for showing me where that thermal switch breaker is! I kept reading there was a breaker to check but I didn’t realize the little black plastic was it. I am up and running thanks to you. Liked and subscribed.
My problem didn't end up being the same as yours, but the way that you broke down the diagnostic steps helped me find the problem along the way. The mark of a great video. Thanks!
Sounds like the problems I am having. They all look the same also. My filters are on the side. Now were you quoting that famous Hee Haw song, Gloom despair and agony on me. LOL
Had the same problem. Volt meter said the thermopile was good. Installed new thermopile after watching your video and now have hot water. Thanks a bunch.
Dude stop. Simply get rid of this gas panel. These panels are nothing but problems. An those thermo piles are never available in stores. Switch out that valve with a regular gas valve with no self lighting ignitor. These new gadgets are no good. Stick to the old gas open pilot set ups
Thermal couple or thermal pile need to be tested under load to make sure it works properly.
Also, dont need teflon tape of flared fittings and make sure your cold water supply goes in on right side.
My stupid WH would not light, all I did was pull out the burner, rotate the thermopile 180 degrees (these get fouled by black soot very easily) stuck it back in and it fired up the first time ;)
The little reset keeps kicking out on mine. Water gets warm but not hot so doesn't make sense. Maybe the reset is bad?
What is the problem when you have a lit pallet
Where did you buy the thermopile?
Sir, thank you so much! Mine was the breaker button too!
Too much jaw, jacking, and not enough information to help the problem
Wow I pushed that little breaker and it started working immediately thank you so much
Sears went down hill years ago.
Yes, I didn't elaborate in the video but Sears gave us the runaround on the phone. It took us 2 days to get a hold of a live person and that person had a very thick Indian accent. They were incapable of understanding our issue, they just wanted to send a service tech and charge me for diagnostic work that I already performed. I get it that they would need to verify my findings but the way they treated us on the phone was very rude. Used to be a store, I could go talk to the techs and they would take care of the issue, but now it's someone from India who doesn't give a darn. I wont be buying anything else from them.
Having same issue you ever find out?
Thank you VERY much. Very helpful information. I took an extremely cold shower last night because I couldn't figure out what was going on. I thought the same thing. How did they do it back in the old days??? LOL. Thank you again Sir. What's odd is after watching this video I made another attempt to light the pilot after doing a reset per another video i watched and it work! I will change the part you mentioned if this happens again.
You're welcome!
Water heater won’t start Eric McC … look at that video
How do you clean the filter thats under the water heater? I can only get so far before I have to come out.
I used a vaccum cleaner with a small attachment, it removed about 75% of dirt, then I removed rest with my hand. It worked after that!
thanks it worked for mine that button it came right on
Good video
Thanks for info!! Helped a lot
Can this happen to brand new one i just install mines today and i can get the light to turn on same thing happen to my old one after 2 to 3 years light turn off and we tried restarting it turning it off wait 5 minutes hold pilot try to ignite wait till it lights up but fire and light never turn on only probably sparks from just trying to ignite it but dammn . So tomorrow im just going return and get it replaced
Yes it can happen to new ones. I think returning it is the best bet. Sorry you had to go through that. Good luck.
They entire tray that u pull out with the burner and thermopile and switch connected to it, do u know what that is called and if I can buy the entire tray in one piece?
I think it's called the burner assembly and I believe they sell the whole thing.
Maybe even tho it was testing good I’ve seen videos where they said you have to clean off the actually connect part of the wires and where they connect.
I'm going through the same thing right now
I tried everything and when I reset that little sensor it lit right up lifesaver❤
Thank you fixed it In mins
Thanks you have my answer.
Oh wow, I'm going through the same thing, taking cold showers 🚿 I be hollin. OMG. A single woman 🤦♀️looking for someone to fix it. Well just know it's not comfortable 😕
...and girls! Thank you for providing the ONE video that answered ALL my questions and helped me fix our cold shower dilema! Ive liked and subscribed so PLEASE; KEEP EM COMING!
I can not get the larger gas line disconnected. I've tried beating on the end of the wrench with a hammer but it will not come loose. Should I try heating it with flame?
No flame, but you could pour some hot water on it. That might loosen it up?
@@TheHandsOnChannel Thanks to your video I narrowed the problem down to the reset button on the switch, that's all it was. Thanks for your help.
Love your video 😊
Excellent video im going through the same issue! You saved me a ton of time thank you!!!!
I have this exact 40 gallon heater from Sears since March 2012. I've had the gas valve replaced twice to date. I have a Master Protection Agreement with Sears, so I never had to pay anything out of pocket. I can't re-light the pilot at all. I had to call Len the Plumber to replace a leaking Temperature and Pressure relief valve on Saturday because Sears had no available techs. Two days later my pilot goes out. I'm hopeful, they can fix it this Friday and give me a little time to save up for replacement. I'm not mechanically inclined nor do I have the testing equipment so I can't do the work.
I just vacuumed the bottom where the air flow is to make sure it was clear. After that, the thing finally lit.
Same. Installed the short fat, had to change plumbing atop. Had to use plumber. Thought he was gonna credit me for the other heater. Did not. But dsame thing with original heater manufacturer. Would take 2 weeks, have to pay etc
Thanks figured it out a cpl hours later..
It probably was the connection. Really easy for even a slightly dirty/loose/poor connection to supply inadequate voltage/current to the intended device when the
the voltage in question is coming from a very low-voltage/current source.
useless talks to much
you just saved me $425 specifically the little black breaker button on the thermo switch. I had a repairman scheduled to come out to "fix" it and now dont need him
I can light the pilot and as soon as it turn it to low the burner kicks on, and then right off...I am hating this tank..
Great job
I have to thank you sooo much for this video. It’s saved me so much hassle. Got my tank going after being without hot water for 2 days!
Thanks!
Honeywell is trash. Burner needs to be cleaned with a long wire brush
In my case the culprit has always been the valve itself. It seems like Honeywell puts a kill-switch to go bad every three years. Just replaced mine with a brand called Residio from Ace hardware. They are not worth a damn.
Well thank you very much for your info. Shared. I know exactly what to do now!
Thanks for sharing! I bought a brand new $600 water heater put it in and this same thing happened! My tenants need hot water so I went and tried to return it to lowes for a refund or an exchange! They wouldn’t do it! I had to call the manufacture I guess I was supposed to leave it installed and have it inspected by there guy! I had to buy another one ( from Home Depot this time) I really don’t think that’s right for me to get stuck buying a dead horse and a full day of my time and aggravation to boot! I’m not making my tenants wait til next month when the company can look at it any advice? Thanks
You’re telling me to pull it apart and put it back together again…. I’m having the same issue
Gotdam you talk alot
No joke dude same issue as you and Been beating my heads for a day, we just ordered a new thermopile so ty. No one carried my part either.
Thank you. your video helped and saved me money
Frontiermen had the Dopamin hits sky high, whenever they did find a water source.
Bro!!! This video helped me a lot off!! It was the thermopile! I just cleaned it with an alcohol while and BAM! It’s turned on!!
Thermo switch reset was the trick for me gonna keep the temp a little lower and see how it goes. Thanks for your help.
Thanks for sharing
My electronic parts were reading correctly, thermal switch has continuity and measures the correct millivolts. So I tried replacing the thermopile anyway and it didn't help. I think its a faulty circuit board which is even easier to replace
Replacing the circuit board fixed the problem. Thank you for all of your info. It definitely helped me figure out troubleshoot! this was also helpful ua-cam.com/video/cAo4I2eoJ9Q/v-deo.html
Thanks, it is my case, I did the same as you did, so I will follow your advice.
Thank you have the status light on but no fire 😢
Thank you. This should be my problem as well.
Thanks man! that little black button switch on the thermopile keeps popping back out. it will go out about once a day and Ill push that little button back in and it will fire right up. Ordering a new one tonight! lol
Thanks for making this! I'm about to head down this same miserable hole
it's that little black connector. somehow the pins don't make good contact with the connector on the valve. there is some way to manipulate them to grip the valve contacts but it's probably only temporary. replacing the thing like you did is the way to go for sure. nice job!
I have the same situation. I’ve changed the thermopile. Still can’t get a status light. Cold showers for 3 weeks now. Any advice?
Probably a bad gas valve.
This video helped out a lot thank you
mines went out 2 days ago lol
I been with cold water for a week and a half....