Homemade Awesome Trike From Scraps And Use DIY Reverse Gear Box
Вставка
- Опубліковано 25 вер 2022
- Dear Everybody,
Today I would like to introduce How to Build An Awesome Trike From Scrap And Use DIY Reverse Gear Box & Front Suspension.
About my welder, you can refer this one: bit.ly/3zRuNUY
I hope you feel interested in my video.
Please like, share and subscribe my channel to see more videos.
Thank you so much!
Fawa Bros.
#fawabros #trike #gokart
Классно варит, все аргоном, швы ровные аккуратные, конструкция интересная, но скорее всего низко скоростная, коробка наверняка будет гудеть, а самодельные ступицы дадут вибрацию. А так очень интересно, спасибо большое за информацию.
That old engine runs like brand new lol
No need to be fake. You have talent and skills. Attempting to be deceptive only upsets people.
Mantap Pok Abu 👍👍🤗
grosse spitze.ich ziehe meinen Hut!
Very impressive. Especially considering that neither the steering linkage, the seat, nor the rear wheel required any means of adjustment, and the front suspension welded together perfectly without using a jig. Really phenomenal build skills.
Obrigado um abraço amigo
So you sell the products you make
A real master! We poor servants will never reach his level.
Hopefully ;-)
Guatafac está guay
Thanks!
That's a pretty neat tricicar three Wheeler 👌 👍
Kereen very Good
Thanks!
khuynh hướng hấp dẫn người xem là gắn mấy động cơ cực khỏe lên máy em nhỏ nhỏ. Cái này mà bạn lắp cỡ em động cơ xe ô tô con nào đó thì bốc hơn, chứ cái 110 cc này chạy đù đù.
Well done. Thank you for sharing!!
Welcomed!
you are the man
Yes, bro.
👍👍👍 good² and beautiful thank u.
Thanks!
Cute rebuilt motor on the junk frame with new tires lol slap some sand on it make it look like a barn find
Very impressive how you cleaned the sand using a brush from a brand new motor. Awesome hand movement stroking the brush it seams like you have a lot of experience, but what I want to know is where you find your trash. Very impressed let us know what site you go to practice that hand motion! don't be shy everyone does it , just you have mastered it.
Very clever, very skillful and kudos to a superb result ... but hardly built from "scraps".
Obrigado
Um abraço
hadir semarang jateng indonesia
Waoooo baguss bangat
Hello Fawa Bros beautifully made you make look like so easy but i no is very technical good job well done friend
Thank my friend so much!
you are so CREATIVE
Thank you!
Quá xuất sắc 👍👍👍
Thanks!
ótimo trabalho , mas, a cambagem da roda dianteira esquerda tá positiva demais pode desgastar pneu.parabéns pelo video
Many thanks for your opinions!
Next he's doing a DIY Ferrari F40 from scraps
Thank you!
Muito obrigado
Pneu abraço
Oh I wish I have your skills of knowledge automation expertise, I really enjoy watching your videos fabulously fabulous keep up your gud invention, you are amazing honestly, cheers from Auckland New Zealand. 🇳🇿 😀 😊 😄 ❤ 👍 🇳🇿 😀 😊
Thank you so much!
You are mostly welcome 🙏 ☺ 😘 😊 🙂
The other thing I was very impressed with is how you demonstrated a reversed motion where you build your mobile .to go forward and backin reverse, yeah I love what you do super fantastic 👏 😀 🙌 👌 👍 😊
Boa noite excelente trabalho ficou sensacional ótimo vídeo
ข
Valeu um abraço
extra good workmanship.
wow,,very inspiring..i love this,,
Thank you so much!
Awesome gear box. Good job.
Thank you so much!
Muy Ingenioso felicidades.
Thanks!
86
You are really a teacher, thank you
Thank you so much!
не велосипед а МОТОпёрд. А так-всё красиво.
That bike frame wheels and engine are all brand new never been used
!!congratulations !!
Excellent videos
Thanks You for noble Cause of make Creative People
Show parabéns 👏 pelo projeto muito bem feito 👏
Thank you so much!
@@fawabros um ótimo dia com muita paz um abraço
Chúc bạn ngày mới vui vẻ😀👍🔔🔔
Thanks!
Thanks!
Boss I have to thank you for this video & build. your skills & ideas are great & a BIS THANKS for your editing skills. I don't care for videos that show every repetitive action , every last part of each weld, and I like the way you lowered the volume when grinding . It is the attention to these things that make a great video veawing experianc.
Good ii boss 👍👍😊😊😍
Thanks!
Looks like fun
Thanks!
great...... ❤️❤️❤️❤️❤️
what kind of welding machine of that and how much? thanks....god bless....
Tự chế Trike tuyệt vời từ phế liệu và sử dụng hộp bánh răng ngược tự làm
هي اعجبتني لكنها قريبة للارض كثيرا..
لو كانت العجلات اكبر لكانت مرتفعة عن الارض وافضل.
Thanks for your opinions! But front wheels are bike’s wheels. So they can’t bigger.
Не ново. Но какая себестоимость и целесообразность?
Wonderfull 💅
Thanks!
Цепь задняя длиная редуктор должен прям за колесом стоять чтоб цепь неболтало. Ну это самоделка. Ладно. молодец.
Браво. 😎😎😎
Thanks for sharing
My friends
Welcomed!
You're steering is going to snap you have a bolt that runs perpendicular to the range of motion it needs to be vertical instead of horizontal at the point where the tie rod meets the a arm there's a little bar that comes off of the tire there you got a bolt going horizontal you need to make that bolt go vertical before you attach it to your tie rod.
Result better flexibility on your steering and you won't be snapping your tire rods off at the ends.
Hey, the brake calipers are mounted correctly! 😁 Fun looking trike! Well done 👍😊
Also visit my channel, friends, there are interesting things to watch
Thank you so much!
@@fawabros 買賣!
Galvanized thin wall building material. Sure ok.
awesome bro
Thank you!
TOP...
i just want to dance becuse the wind has so many toons to it!
bro makes it look so easy!
Your videos are very creative 👍
Thank you!
Класс 👍🤝🇧🇾
Thanks!
Good
Good jop, amazing
Thank you!
Inspiring job, congrats!
I was expecting to be a leaning trike when you weld the front arms, but at the end it dont lean even a bit.... can you help to understand why not? If you force and lean your body to the inside of a curve would it lean with you?
Highly skilled, great ideas!
But no aesthetic sense at all... That's the good part.
Nice Work
Thank bro!
are brand new parts you toss some dirt on considered scraps? if so, ive been using that word wrong all these years...
p.s. awesome job on the gearbox :)
Obrigado
O meu abraço
That is one helluva air blower to have one of them make my parts look brand new who does this guy think he's fooling
Самое удивительное, это настоящие тормоза и самодельная коробка.
Very interesting vehicular assembly, have you seen those of the Czech Velorex? Maybe they have already given you some other ideas to apply. Greetings from San Luis Argentina!!! .--- Muy interesantte montaje vehicular, has visto los de los Velorex Checos?, tal vez ya te hayan aportado algunas otras ideas para aplicar. Saludos desde San Luis Argentina!!!
sao k test tốc độ bạn ơi. đường vắng chạy như rùa bò thế
I need to find a scrapyard where tons of construction steel, steel sheets and new fully packaged suspensions waiting for me to be taken away.
Serious, where is the scrap in this ? 98 % on this in new, raw material.
And everything fits by taking measures with a measure band =)
And, only for the files, your front wheels will be done very soon.
é de mais excelente
Thank you!
I'd say that wood dust came off pretty easy 🤭
Yep, some compressed air et voilà, brand new parts.
Muito obrigado
Um abraço
great. I think an ebike electric hub motor in the rear would be more efficient. In order to be street legal in the US it must also have pedals. A roof would be great for rain and solar power
Boa noite
Muito obrigado
Um abraço
Waoow🤩🤩🤩😘😘
Good listening ... Jangan lupa mampir ngopi Ireng biar tambah semangat berkarya
Thank you!
parabéns 👏👏 vc é muito pefecsonista show,seus projetos são muito funcional gosto de seus projetos parabéns
Thank you so much!
how are you welding with a tig but no filler rod? I googled it and it can be done but only if no gaps to be filled and its not very strong
I also wonder it!
and don't forget to put air scopes on the side for the motor 's cooling .. YOUR SEAT BLOCK'S OFF THE SUPPLY IF U DON'T IT WILL START SMOKING AND EVENTUALLY SIEZE .. HAVE SEEN THIS BEFORE it wont take much to do
Many thanks for your opinion!
@@fawabros 11qQQ5
Nice video bro
Yes, bro.
Also visit my channel, friends, there are interesting things to watch
for the gearbox, the gear that is used is free, can you use any gear?
What’s free? What kind of gear do you want to use?
круто 👍👍👍
Thanks!
Классный колхоз!!!
hello great video, I am 16 years old and I am learning welding in school later I would do your job, could you pass the plans of your vehicle please
Also visit my channel, friends, there are interesting things to watch
Sorry, I don’t have plans to share.
نسلم انا فخور بيك
Thank you!
Новый движек обсыпал старужкой, пылью, по звёздочки видно, что износу нет, да и колеса новые. А все за старое преподносят. Как такое у этих мастеров заведено.
Where ia it sir ? Wont you sell to me
I don’t sell. Sorry!
Boa noite estou começando a ver seu vídeo diante mão quero dizer o mentira grande dizer que a moto é uma sucata 😂
💯💯💯💯👏👏👏👏
А что он задним ходом ездиит ?
Nätti rakentamisvideo. Hyvä suunnittelu. Epäonnistunut toteutus. Virheistä oppii ja hyvä niin.
juuri näin, koko ohjauksen geometria on täysin päin persettä, samoin istuimen kiinteä asennus ihan väärin, ja jarrujen pedaalit todella paskaa, hyvää oli jousituksen idea, ohjauksen tankojen toteutus täysin pielessä, no oppiipahan ja jos älyä tekee uusiksi paremmin. töppö korimuotoilu myös. monet todella paljon paremmin toteutetut viideot nähty, ite teen joskus triken kans kun verstas kerran on ja aikaa tehdä, entisenä insinöörinä tuo vaihteistokaan ei ole hyvä tein lopputyönä inssi aikoina opiskellessani vaihdelaatikon ja oli "hieman" parempi haha. 5 eteen ja 1 taakse.
Pesan gear bok maju mundur 1 set bos.
Why you cleaning new wheels?
Thời kì đồ gia công
very nice
Thank you!
The rear shocks don’t do anything because what should be the pivot point is welded and I would not trust the brake on the large wheel being it is held in place by a set screw.
Not only is the brake held on with a set screw but the set screw only attached it to the axle rather than the hub making the brake useless.
Very nice modification Sir ! From Tangub City, admiration of your talent .
I am Felix Mondong of Maloro T.C. Wish the mass production of that !As such we just can buy ! We can not do that out of reach of our talent And what is ur nationality!
Да нуу, крокодил какой-то, габариты большие, как будто на ней сено возить
рулевая трапеция? не, не слышали
Класс, 👍👍👍а каким вы сварочным полуавтоматом пользуетесь?
Do you tig together mostly with no filler rod?
i thought the same. I you do not want to show all the welding, than don´t show it at all.
อยากดูตอนเบรค รถจะไปยังไง
👏👏👏👏
request bro: Make a wheelbarrow with the MQ08 engine to load palm oil.
en que pais hay esos desechos´´´¿¿¿¿¿¿¿¿¿y las tuercas se apretan con la estria no con la boca de la llave