Solutions that can help you to be a Real Joiner, and that can make your day count! ✅✅ Make 16,000 Projects With Step By Step Plans ...even if you don't have a large workshop or expensive tools! ➡ Get instant access to 16,000 projects now e8776pv9zrv8tpgmf11fs9-oeq.hop.clickbank.net/
наоборот надо,для благого дела..чтоб не быть лохом и не покупать за 10кг.Au китайский станок без биения..достаточно мирового потреблядства...видите как можно..с помощью палок и камней можно точить не хуже суперзаточных заумных станков с унитазом и холодильником
Interessante soluzione. Bravo! ma io un paio di modifiche le apporterei: la barra filettata che sostiene la mola la farei di diametro di almeno 10 o anche 12, per evitare che fletta (lo si vede dal filmato), facendo ruotare in modo anomalo la mola; naturalmente il serraggio al trapano deve essere modificato se il mandrino non sopporta i diametri di 10 o 12 mm. Forse la grana della mola non è quella pù adatta per affilare le lame di pialle e scalpelli ...
There's a reason no one shows this "Trick" on the internet. As someone else has already stated, it needs refinement.... serious refinement. Good luck with it not flying apart.
Needs refining. Stronger shaft, balanced wheel, slow rotation possibly, less width to stop flexing, wooden wheel with changeable wet and dry paper on outside and slow rotation with water drip to give mirror like scalpel sharpness
Fantástica ideia, Will! Muito bom mesmo! 😃 Daria pra colocar um recipiente pra água debaixo da pedra! Abraços e se mantenha seguro aí com sua família! 🖖😊
@@WillWoodDiywoodworkingsi, si senior, si!!! Simplicity+practicity... Thanks🙏 for your😮 💡idea About "💧💦waters-bowl"... Good(device-lifehake) 👍-always better them nothing!!!
adorei essa ideia, sò acho poderia melhorar a precisão na rotação da pedra e a possibilidade de molhá-la com água o resto è td bom mesmo! Um abraço da Itália 🙂
These videos are simply super! ❤ Why? Because you do not need any super special device, appliances, and can you make it home! Somebody is complaining that kindergarten level, etc.. I don't agree, look:professionals will need no videos, some people simply buy some sharpener, but, most of people want to do something, have just basic hand tools, no big expensive machines, no room to store it, and these people are eager for help, as me. So real pro, inventor, can give you advice, how to create some gadget, help, how to use one hand electric device several way, etc.. And that I highly appreciate! 👍
Nice use of the tools you own. Still, there's nothing like having the right tools. You also could mount more than one grinding wheel and end up with a polished finish on your irons. But you MUST get rid of the wobble and the eccentricity of the wheel. Then again, I wouldn't opt for using a drill and some all-thread for a shaft.
Вогнутая линзовидная заточка весьма широко распространена, в т.ч. и на железках рубанков. Биение убирается за 5-10 минут. Сама идея вполне годная (посмотрите заточные станки TORMEK)
Cool idea, just need to balance the wheel to get rid of the up and down action but otherwise very neat. You might want to clean and sharpen your hole saw and drill bits. It will help with the appearance of the cut and it will make it cut better too. The black that it leaves behind is called burning and it could catch on fire. Don't want you getting hurt or anything, stay safe and keep building! 😁
This guy is really slick. With a little imagination, you could almost bring yourself to believe that he has actually used tools before! Well, alright then, a LOT of imagination.
I have to ask if this contraption is as safe as the proper bench grinder. I notice that in all these videos that top of the line tools such as angle grinders, drills are used rather than cheaper unbranded models. This is obviously because brands like De Walt while being comparively expensive are safe sturdy and reliable. Yet they will modify these tools in a way never designed and compromise safety. This video reminded me of my late father, who rigged up a bench saw, which he also used as a chisel sharpener. As a child I never realized what a dangerous contraption it was with no guards of any kind and spinning at a high speed. He didnt use push sticks or wear earmuffs. Perhaps he was lucky that he didn't suffer serioius injury especially that carpentry was his livelihood. We have come a long way since then but I hope I have learnt to repect power tools and use the right tool for the job.
I own 6 six planes and have sharpened them on a wet stone for 20+ years. I do not see an advantage to this. Likewise, I can sharpen all six several times in the time it took you to build this, and I get a razor sharp blade when I am done. In my opinion it is not a trick it is a waste of time unless you are doing 100 blades at a time and if you are, you would need a better quality machine than this.
In 1/4 the time it took to construct this monstrosity, you could have manually sharpened ALL of your knife blades, chisels and plane blades with a wet stone (oil stone, diamond stone etc).
Looks like the plane iron would get hot and draw the temper if you couldn't quickly and frequently quench it. The idea seems sound, but without a way to quench the piece, it seems like it'd be the ruination of your blades.
Nobody shows it because you can buy a cheap honing guide for couple of dollars that works perfectly on any flat abrasive like wet stone, oil stone, sandpaper etc.
Биение камня это еще пол беды, беда заключается в том, что у ножа нет горизонтальной жесткой опоры, а от сюда и ни о какой точности говорить не приходится. Просто, красиво, бесполезно!
this disk will destroy the blade. a proper system would spin slowly and require continuous water cooling. besides, no adjustment of the angle. it will not work for shorter blades. not even try to imitate this.
Камень ровно не получилось установить? Нужна втулка, тогда биение будет минимальным, но при наличии сверлильного станка сверлить шуруповертом и дать неверное направление для оси это нужно суметь такое сотворить, и все получилось..., а точить полотно без правки это шедевр. Идея понятна, но реализация на 3-.
Забиваем гвозди адронным коллайдером. При наличии в мастерской инструмента общей стоимостью с адронный коллайдер в ней не нашлось второго гаечного ключа, хотя бы разводного. Люфты, биение... хай-тек в стиле хай-так.
Во первых, шпильку надо жёстко зафиксировать во внутренних обоймах подшипников, иначе их разобьёт, и тогда к уже имеющемуся биению камня добавится люфт в подшипниках. Во вторых, камень надо выровнять алмазом и отбалансировать. А в третьих, такую приблуду лучше сделать к заточному станку, а не лепить этот колхоз
Соприкосновение лезвиия рубанка и абразивного круга происходит не по плоскости заточки, а по точкам линии, т.к. круг имеет кривизну. Затачиваемая поверхность не прилегает всей плоскостью к кривой поверхности круга. Заточка будет ребристой,не идеальной. Лезвие надо повернуть на 90 градусов к кругу и двигать вперёд-назад. Вобщем поделка=туфта.
Solutions that can help you to be a Real Joiner, and that can make your day count!
✅✅ Make 16,000 Projects With Step By Step Plans
...even if you don't have a large workshop or expensive tools!
➡ Get instant access to 16,000 projects now
e8776pv9zrv8tpgmf11fs9-oeq.hop.clickbank.net/
❤❤❤😂🎉😂❤❤❤
С таким биением , и не нужно показывать это в интернете 😱😱😱😱😱
Вы, наверное тоже точить не умеете, не ноже будут заусенцы- строгать не будет.
А биения тут вообще херня...
наоборот надо,для благого дела..чтоб не быть лохом и не покупать за 10кг.Au китайский станок без биения..достаточно мирового потреблядства...видите как можно..с помощью палок и камней можно точить не хуже суперзаточных заумных станков с унитазом и холодильником
Кто хочет убить нож на рубанке - повторяйте за ним...
с водой надо и мелкозернистый камень
Ой, совсем плохо, зернистость конская, биения конские, точность ничтожная. Да и плоскую заточку желательно делать. В топку!
There is a feeling of satisfaction when you make your own tools. Better options may be available but you can't brag that you made it yourself!
Thanks for the idea. Good starting point for beginner mind. Can be refine, the brain has to start somewhere. We all are not pros starting out.
I built a jig like this back in 1975, I still have it and it still works,,,popular mechanics
Interessante soluzione. Bravo! ma io un paio di modifiche le apporterei: la barra filettata che sostiene la mola la farei di diametro di almeno 10 o anche 12, per evitare che fletta (lo si vede dal filmato), facendo ruotare in modo anomalo la mola; naturalmente il serraggio al trapano deve essere modificato se il mandrino non sopporta i diametri di 10 o 12 mm. Forse la grana della mola non è quella pù adatta per affilare le lame di pialle e scalpelli ...
Thanks for watching and leaving your comment 😉👍🙏
Gute Idee, einfache Ausführung leicht zu bauen toll. Ich finde es gut.
Thanks for watching 😉🙏👍
das kann nicht dein Ernst sein?
There's a reason no one shows this "Trick" on the internet. As someone else has already stated, it needs refinement.... serious refinement.
Good luck with it not flying apart.
Needs refining. Stronger shaft, balanced wheel, slow rotation possibly, less width to stop flexing, wooden wheel with changeable wet and dry paper on outside and slow rotation with water drip to give mirror like scalpel sharpness
i.e. nothing like what is done here
und eine passende Scheibe nicht zu vergessen,damit kann man Pflugschare schärfen.
Fantástica ideia, Will! Muito bom mesmo! 😃
Daria pra colocar um recipiente pra água debaixo da pedra!
Abraços e se mantenha seguro aí com sua família! 🖖😊
Fala meu amigo! Pô, boa ideia mesmo. Grande abraço e cuide-se bem. 😉🙏👍
@@WillWoodDiywoodworkingsi, si senior, si!!! Simplicity+practicity...
Thanks🙏 for your😮 💡idea
About "💧💦waters-bowl"...
Good(device-lifehake) 👍-always better them
nothing!!!
adorei essa ideia, sò acho poderia melhorar a precisão na rotação da pedra e a possibilidade de molhá-la com água o resto è td bom mesmo! Um abraço da Itália 🙂
They make tools for that kind of jobs .and a lot easier to use
Какой ужас. Старания бесспорны, но такое нельзя показывать. Это брак. Максимум, если как пример того, что нельзя делать
Projeto simples e genial já dei o Like e ganhou mais um inscrito só não pode deixar a lamina aquecer para não tirar a tempera.
Здесь показано как делать НЕЛЬЗЯ!!!!!!
В точку!
Great work bro! Does exactly what it is supposed to do. Thank you for taking the time to record, edit and share 👍
Thanks for watching and leaving your comment 😉👍🙏
Those vibrations looked pretty intense. Also how do you grind a camber on an iron?
Very cool 😎 That’s I call a really good idea 👍
😉🙏👍
Заточка всех режущих инструментов производится навстречу вращения абразивного круга, дабы не перегревать режущую кромку!
Такое биение не допустимо...
These videos are simply super! ❤ Why? Because you do not need any super special device, appliances, and can you make it home! Somebody is complaining that kindergarten level, etc.. I don't agree, look:professionals will need no videos, some people simply buy some sharpener, but, most of people want to do something, have just basic hand tools, no big expensive machines, no room to store it, and these people are eager for help, as me. So real pro, inventor, can give you advice, how to create some gadget, help, how to use one hand electric device several way, etc.. And that I highly appreciate! 👍
Das hast Du gut formuliert
Anda sangat jenius
Terimakasih telah berbagi
Исправить центровку наждачного круга. Спасибо за идею и работу .(Ереван)
Насаженного на шпильку??? Хотел бы я это увидеть )))
@@ДмитрийВеретенников-р5м изоленту намотать можно.
В чём идея-то?
Good idea but it isn't accurate . I think it is very accurate but grinding disk hasn't in center. This tools is very useful and practical ❤️
Thanks for watching my friend 😉👍🙏
Love to you my friend 🌷👍
I'm from Iran.
Thank you for your innovation
También servirá para afilar formones...muy buena idea 😊
Nice use of the tools you own. Still, there's nothing like having the right tools. You also could mount more than one grinding wheel and end up with a polished finish on your irons. But you MUST get rid of the wobble and the eccentricity of the wheel. Then again, I wouldn't opt for using a drill and some all-thread for a shaft.
да уж, видно что камень "бьет" и к тому же кромка будет иметь вогнутость по диску
Вогнутая линзовидная заточка весьма широко распространена, в т.ч. и на железках рубанков. Биение убирается за 5-10 минут. Сама идея вполне годная (посмотрите заточные станки TORMEK)
Parabéns irmão 👏👏👏👏👏🍶🍶🇧🇷💪👋
MM77 Approved 👍🏻👍🏻
Good idea, but a bit wobbly and dangerous. Additionally, there is no guide to set the grinding angle...
Thanks for watching 😉🙏👍
Top....'bravo
Well well bro, great tool 👍👍
Great idea thank you
Thanks for watching 😉🙏👍
😂 Super.. Rad neu erfunden 🤝😁
Muito bom merece parabéns
Excelente del momento que ha medida que avanza da todas las medidas a utilizar. El mejor video que he visto.
Video vielleicht,aber das Ergebnis ist Hahnebüchend !
Si pudieras poner la lista .escrita te lo agradezco maestro.gracias.saluditos cordiales para ti.
Cool idea, just need to balance the wheel to get rid of the up and down action but otherwise very neat. You might want to clean and sharpen your hole saw and drill bits. It will help with the appearance of the cut and it will make it cut better too. The black that it leaves behind is called burning and it could catch on fire. Don't want you getting hurt or anything, stay safe and keep building! 😁
Thanks for watching 😉🙏👍
I think the friction of the grinding stone on the steel would ruining the temper of the metal !
И зачем я это смотрел ❓😢
The quality of your videos is outstanding, always making me learn something new!
Probably waiting to see what the trick was that never happened. You and l have just wasted 10 minutes on this rubbish
@@phil3332 Sei talmente furbo che hai capito solo alla fine;)
Awesome
Thanks for watching and leaving your comment 😉👍🙏
Bravo hai scoperto l'acqua calda,
Thanks for watching 😉🙏👍
Een moer tegenhouden met een combinatietang, chapeau!
Эта ерунда не стоит таких усилий. Проще использовать обыкновенное точило.
С упором!
Направление движения круга неверно.Не надо это смотреть.
Gostei muito, parabéns. Um abraço daqui do Brasil.
Obrigado por assistir e deixar seu comentário 😉👍🙏
This guy is really slick. With a little imagination, you could almost bring yourself to believe that he has actually used tools before! Well, alright then, a LOT of imagination.
Somebody has too much time on his hands.
Teniendo una taladradora de columna los taladros de 35 de diametro los hubiese hecho mejor .
Saludos 👌👌⚒️⚒️
Super przydatne urządzenie. Pozdrawiam.
Good ❤❤❤❤❤
Great Idea! √√ --BUT: The Stone is waaaay tooooo wobbly. Stone needs to be CENTERED much better, hence balance would be given.
Биття заточного круга зводить нанівець всю конструкцію. Потренуйся з балансуванням та центровкою і шпильку для вісі не менше M12, чи 1/2'
Малость доработать ,и нажи для рубанка точить можно ,идея хорошая.
самое простое устройство...невероятно,почему я это вижу???сегодня мне пришлось точить нож,не снимая с рубанка....наточил..
i agree 100% no one show on internet but but this is intellectual rights
Your hole saw is dull and you are in need of a new one. But still very nice work, I have had to use dull blades a few times.
Ну если диаметр камня увеличить до 400 мм, то идея будет рабочей. Пока только фантазии.
можно на подходящее колесо пол метра наждачку приделать. водяное точило
Ever hear of a crescent wrench rather than pliers to tighten a nut. Show you know the right tools and how to use them.
Pliers are for HOLDING things.....not mutilating nuts and bolts. Get some remedial training in the use of tools.
Muito bom wou de bola
I have to ask if this contraption is as safe as the proper bench grinder. I notice that in all these videos that top of the line tools such as angle grinders, drills are used rather than cheaper unbranded models. This is obviously because brands like De Walt while being comparively expensive are safe sturdy and reliable. Yet they will modify these tools in a way never designed and compromise safety. This video reminded me of my late father, who rigged up a bench saw, which he also used as a chisel sharpener. As a child I never realized what a dangerous contraption it was with no guards of any kind and spinning at a high speed. He didnt use push sticks or wear earmuffs. Perhaps he was lucky that he didn't suffer serioius injury especially that carpentry was his livelihood. We have come a long way since then but I hope I have learnt to repect power tools and use the right tool for the job.
A photo of the finished item at the beginning of the video would be nice. Otherwise no idea what is being shown.
Thanks for watching my friend 😉👍🙏
Идея 👍, но балансировка точильного камня "вышла из чата" 😁
Между прочим вариант очень даже рабочий,камень только бьет,но выровнять не проблема
Thanks for watching 😉🙏👍
Kan bero på att ingen har kommit på detta tidigare. Smart ide tycker jag
Simple, but brilliant idea that works very well.
You have a new subscriber Sir!
Where did you see an idea? Have you learned anything new?
Для кружка ,,Умелые руки,, младшего школьного возраста
см. заточный станок школьника. там на шланге. 50 лет работал
I own 6 six planes and have sharpened them on a wet stone for 20+ years. I do not see an advantage to this. Likewise, I can sharpen all six several times in the time it took you to build this, and I get a razor sharp blade when I am done. In my opinion it is not a trick it is a waste of time unless you are doing 100 blades at a time and if you are, you would need a better quality machine than this.
Это называется изобретать велосипед, когда коту делать не чего!!!!!
А Вы делаете что нибудь ?
@@VahanToroyan-zx4ed Да, я творческий человек, делаю красивые вещи из дерева, но такой хернёй я не страдаю
Sangat keren
Thanks for watching 😉🙏👍
Гений!!!😂😂😂
Не каждый с помощью "трюка" хочет показать альтернативную свою одарённость.
In 1/4 the time it took to construct this monstrosity, you could have manually sharpened ALL of your knife blades, chisels and plane blades with a wet stone (oil stone, diamond stone etc).
Looks like the plane iron would get hot and draw the temper if you couldn't quickly and frequently quench it. The idea seems sound, but without a way to quench the piece, it seems like it'd be the ruination of your blades.
Nobody shows it because you can buy a cheap honing guide for couple of dollars that works perfectly on any flat abrasive like wet stone, oil stone, sandpaper etc.
Gracias, necesario , Idioma español
😉🙏👍
No matter what you say not building a brace for the is just plain dangerous
Биение камня это еще пол беды, беда заключается в том, что у ножа нет горизонтальной жесткой опоры, а от сюда и ни о какой точности говорить не приходится. Просто, красиво, бесполезно!
this disk will destroy the blade. a proper system would spin slowly and require continuous water cooling. besides, no adjustment of the angle. it will not work for shorter blades. not even try to imitate this.
🇺🇿👍👍👍ZOR
😉🙏👍
@@WillWoodDiywoodworkingПрывiтанне майстра
Уiл !
Удалы праект , iдэя
спрауная . Жадаю
выдатных творчых
поспехау .
Oh hell no...I will stick to hand sharpening....there is so many inconsistencies...hell the blade practically jumps off the wheel.
Meine Güte, deine Bohrkrone ist so was von stumpf!
Камень ровно не получилось установить? Нужна втулка, тогда биение будет минимальным, но при наличии сверлильного станка сверлить шуруповертом и дать неверное направление для оси это нужно суметь такое сотворить, и все получилось..., а точить полотно без правки это шедевр. Идея понятна, но реализация на 3-.
Thanks for watching 😉🙏👍
Красиво, умно сделано, но заточку производят кругом на нож.
Ура он изобрел точило😂😂😂😂😂😂
obrigado
Забиваем гвозди адронным коллайдером.
При наличии в мастерской инструмента общей стоимостью с адронный коллайдер в ней не нашлось второго гаечного ключа, хотя бы разводного.
Люфты, биение... хай-тек в стиле хай-так.
Thanks! You are father of invetions🙏
Grinding wheel shuld be true alliment, it's out running.
ну то, что инструментом пользоваться не умеем мы увидели и рубанок строгать не будет, тоже понятно, а видос-то про что?!
🙂!
that blade leads in the work
Uauuu
Thanks for watching
Во первых, шпильку надо жёстко зафиксировать во внутренних обоймах подшипников, иначе их разобьёт, и тогда к уже имеющемуся биению камня добавится люфт в подшипниках. Во вторых, камень надо выровнять алмазом и отбалансировать. А в третьих, такую приблуду лучше сделать к заточному станку, а не лепить этот колхоз
Не серьезно. Инструмент так не точат.
Соприкосновение лезвиия рубанка и абразивного круга происходит не по плоскости заточки, а по точкам линии, т.к. круг имеет кривизну. Затачиваемая поверхность не прилегает всей плоскостью к кривой поверхности круга. Заточка будет ребристой,не идеальной. Лезвие надо повернуть на 90 градусов к кругу и двигать вперёд-назад. Вобщем поделка=туфта.
Контрить гайки двумя ключами слабо?
У него только один ключ😂
Я не профи, но на простом точиле, держа нож рубанка в руках, заточил бы его намного лучше, чем при таком биении круга.
Биение камня нужно убрать и будет порядок. Молодец 👍☕.
мелкозернистый камень надо меньше оборотов и корыто с водой