Upgrade Cargo Tractor to 196cc and CVT Gearbox, Led Bar
Вставка
- Опубліковано 13 вер 2024
- In this video, i will Upgrade Cargo Tractor to 196cc and CVT Gearbox, Led Bar, Reverse Gearbox.
- Led Bar in video : you can check link buy:
LED 15 Inch 60W: ban.ggood.vip/...
-coupon code BGled01 35% off
LED 9 Inch 30W:ban.ggood.vip/...
-coupon code BGled02 30% off
Light Bars surport 4WD Trucks & SUV & ATV Trailer & Motorcycle, waterproof IP68
+ Video : Build a Cargo Tractor • Build a Cargo Tractor ...
Thanks for watching, Have a great day !
Mud guards. Foot boards. Beer Holder. Horn. Then youre in business. Highly impressed! Excellent skill.
No mud guards
I loved everything about this builder video. It blows my mind how the axel wasn’t welded in a jig or using a measured form as were cuts made with a powered hand grinder/cut wheel without regard to being plumb. Yet, they were! You are incredible, just fantastic. I noticed the gearbox wasn’t accommodated with a carriage or with a modular frame, welding the entire unit to the frame - but it works until it has to be replaced.
J D We called them “One eyed buffaloes” because there was one headlight in the middle on the front.
Absolutely amazing! What skill, what a shop! No GoPowerSports here! This gentleman is a genius!
Great video, no commentary,or music or any other distractions, ❤️ it.....
You need to start putting mud guards over the wheels of your builds it would finish them off nicely 😁👍
Fenders would be a nice addition. You wouldn't have to worry about mud and water so much. Great job!👍👍👍
You are amazing the way you just go to your shelfs pick parts up and build great stuff I love it and I will watch every stream
Tôi nghĩ rằng đây là điều tuyệt vời nhất mà bạn đã xây dựng. Tôi thích nó! Bạn là một người đàn ông rất thông minh, cảm ơn vì đã chia sẻ
Amazing!! You have the cargo tractor, now you must have/built the forklift!
Excellent job. I like it
One of few to be living off UA-cam money. Awesome & Lucky.
Especially for being where he is living.
This guy has everyone's dream horde
Hallo saya dari indonesia, ,
Sangat mengagumi semua karya karya mu, ,
Mantap sukses terus 😂😄
*Dang, he always get parts for free!* 😁👍
Vechar thay che masin nu
This channel is the reason why I wanna make DIY vlogs. So inspiring!
You are very good guy
Dios bendiga a todas aquellas personas que le dedican tiempo a enseñarnos las diversas áreas profesionales ,investigaciones ,manualidades en tutoriales
WOOOW, this is TOP. Its so good to see a video without all the safety and security about sharp and warm tolls, safety glasses and bla bla! And You make it so simple and practical! My hat off for you mister.
Шикарно получилось! Малодец!
Молодец, адекватно воспринял конструктивную критику.👍👍👍
- Для начала забери у людей право решать кто ты.@user-xq5vg2md4o
- Один тебе скажет, что ты плохой, ты поверишь ему и расстроишься.
Другой тебе скажет, что ты хороший, ты обрадуешься.
Тебя хвалят или ругают, верят тебе или предают.
Пока у них есть право решать кто ты, или какой ты, тебе не найти себя.
Забери у них это право.
I wouldn't feel safe driving this tray pulling tractor @ high speeds or on the road, but excellent farm option, this man knows how to fabricate.
Your videos are so amazing.
When I was in South Korea in 1980, this was a very common form of transportation for the locals.
Yes, we Koreans call it a Gyeong woon gi (경운기). It is still commonly used in the countryside.
this is a very common vehicle in almost every asian country in the countryside, each country has their own names but they're practically the same, although most of them uses a diesel tractor engine with a crank rather than a gasoline powered GX engine.
Ohhhhhhh wow, fantastic and very very FANTASTIC and very very best ok ✔️👈💯🤗👍🆗
Very cool love it!
قسم بالله انه مبدع وفنان 👍👍👍 كفووووو
Now it at its perfection great job I only wish the engine could power the lights but the battery does the job and would get you home 👍👍
Are you talking about a alternator?
@@ibroughtaturbo-chargerfrom667 yes an alternator or a charging coil would be the options available 👍 , another option but mabey won't give enough charge as needed would be a solar panel .
You are the best my friend beautiful car
This video smells like FREEDOM.
It is like fridom
sure it is
Only in.... wherever this is. its probably america because it has a big engine either way.
i'm totally down with freedom...but imagine if people could drive whatever homemade car they pieced together on american streets...would you tolerate that thing barreling down the road near schools and parks?...or even dodging in and out of parking lots
cake eater pretty sure he’s in China or Vietnam from the scenery
Super bro iam your fan
its interesting to see a smaller version of this design. We use this vehicle in the phillipines.For hauling everything from wood, rice bags, pigs, and manny more. 👍👍👍
the torque converter is doing great in this build. i saw in lazada 5,000php for the torque converter kit. i was wondering if the torque converter could also be used in smaller engine 49cc
What are these vehicles called?
Quiero comprar un CTV ( convertidor ) aqui en Ecuador presio o si en mi pais venden
Es para adaptar a una turbina jet para empujar un bote de 7 mtr de largo y1.70 de ancho
Superb! Very very very good video and sound ! Great!
Greetings from Zagreb / Croatia
This is a very cool build. I love how it eliminates steering, plus it would be fairly simple to add another engine to the rear axle to make it a 4x4, and if the center swiveled nicely it could make for some nice articulation. (Also I am very pleased to see that I am not the only person that say “f-it” and welds through the paint...lol)
Hello Vidio oke love❤️❤️❤️from Indonesia👍🏾👍🏾👍🏾
Нужно теперь добавить полный привод и поехать на оффроуд :)
I love you creative channel
I find it strange that he wears a business shirt while he works on mechanics. but i like it!
it's the sandals that get me
It's asia, we wear anything we like anywhere, anytime.
i think its only your contry..not asian..in singapore, anything you wanna do..safety come first..not style come first..
This guy is an absolute genius, I love it...
I think you could register that in Tennessee. Just add brake lights, horn, turn signals, and an orange triangle and you could get agricultural tags.
It appears in his country he doesn't have to as he's drving it down the road.
@@25Soupy I understand that, just commenting on how anything can get registered in Tennessee.
@@25Soupy pity we are stuck with softcocks and lawyers otherwise we to could drive this on the road
Try making mini dumper..like wheelbarrow..amazing job
how such a master can put dislike? the one who puts do it yourself.
i like all your work sir. i always watching all your project
Hi, Build a small 4x4 tractor for towing rv around the yard ,forward and reverse.... keep up the good projects......
very nice creative work.
Great job youre about to win
You,re a genius man
Just needs some front mud guards and flaps and you can go full speed through those puddles
Very good video
The engine changes look due to the old engine had a gearbox built on it from the first video. That is my guess from what I seen. Very good work on Upgrade
No gearbox on the other one just a centrifugal clutch
@@chrislewis2262 it had a gear reduction
Its so nice build of cargo tractor well you continio of making onother visicle yul make a job
Сделай брызговики, арку над колёсами и движок под капот будет👍
it was very beautiful
This man is the master of MacGyver.
Very talented, well done and thank you for sharing! :)
По моему этот "ЛЕВША" работает по типу советского авто-прома, на глазок прилипил и вперёд!!
А что за двигатель он ставит ? И где его взять ?😬
ну ему же не для людей делать
@@maxslayer3804 220 вольт там этих движков от 2до 19 лошадей.
Ни хрена, долго не поездит, синей изолентой кое что не обматал, и проволокой не прикрутил, а так ну прям 600тый мерин...
Блин как быстро сломается? Именно сломается, оси или движок вывалится?
I’ve thought about making one to use with my small utility trailer, especially handy for out in the bush.
We all appreciate your unique DIY vehicles from salvaged parts!
Yeah... salvaged from his mailbox to his shelves
:
:
wow the build is interesting
Do you love Turkey🇹🇷
tukrey?
pls pls pls pls
Hadi gene iyisin bende bende doğuluyum
With chestnut stuffing? Indeed.
I was just thinking in the last video, " ya know what would be cool? If he added headlights to that little thing". And he has delivered!
i think he just was book led bar before
Vechar thay che masin nu
This is brilliant! Makes me want to learn how to weld. I'd have a double U articulated joint to allow lateral movement. You have allowed for movement in 2 directions but not the axis in line with the vehicle.
What the hell are you saying
اي
Yeah
you don't want that because it would always be bent with the joint dragging on the ground
It's very noisy it may be cause noise pollution.by the you making these types of vehicles are very beautiful and amazing
Next, remove the governor. It wont blow the engine since the torque converter will limit its revs around 5300 rpm. And the valve springs begin to float around 5500 rpms
Yes, the governor is very annoying for direct throttle applications like a vehicle
我來自埃及，我喜歡這個視頻
Mnie też się podoba. Wy tam w Egipcie to chyba na osiołku jeździcie.
@@Raul-pp1uh 你是什麼意思，呃騎驢，但是你是驢
@@Raul-pp1uh هوانت من العرب
@@user-py5rg4rs7y Mi chodziło,że takimi pojazdami zaprzęgniętymi w osły jeździcie:
www.fotosearch.pl/fotografie-zdjecia/osio%C5%82-w%C3%B3z.html
Ждём следующий видио,с установкой кабины,стартера,защитных крыльев.🛠🔩
Fantastic 👍 ...
Love this video but why replacing the engine, from my understanding its the same hp. Keep it up, great work
I make myself the same question. I also loved the video.
Probably more torque
@@fabianradakovitz9064 maybe, but i don't think so
Old one has a buit in gear box i think
from a 169cc, 6.5 HP, to a 196cc, about 8 HP
Very good Amazing
Make this 4x4 with a diferential on the trailer.. that will solve slipping in sloping hill under heavy load on the trailer.
In my country, I can not put a vehicle like this on the road and got not a hell lot of trouble with the government, thats sad on one hand. But on the other hand life here is in some ways easier, but also less free and careless happy. Nice work dude, have fun and carry one!
brake light, electric starter, rear brakes and you'll be golden!!
some fenders too
Amazing..incredible .. oustanding .. and very creative..man. all the best dude.
Love it. I'm making it. Kinda looking at it wondering on putting an engine in rear for 4wd? See what I come up with.
You should post it on youtube when its finished, ima subscribe so i dont forget😃
Almost everything is brand spanking new and shiny. This guy doesn't fuck around.
When attaching the locking clip on a drive chain the open end of the clip should always face the opposite direction of the rotation of the chain.
May i ask why? I have a guess, but i would like confirmation if i am right
@@sierrakilo1174 If the chain is rotating and just by chance something come into contact with the chain at that clip it can push the clip off if the open end is facing the same direction as the rotation of the chain. Clip gone your chain is going to go flying off and may cause injury..
@@rgbigdog oh ok thank you for explaining
This is a better farm vehicle than a $16,000 USD side-by-side.
Not seen one of these before. But this would fit a need I have on my homestead.
I love that the guy has a nice jeans and shirt and drove into mud with no kind of mudguard.
バッテリー日本語で書かれていますね。
アシスト電動自転車のバッテリーですね
Não entendi
I think you should add 2 from fenders & rear lights next. 🚜
Just need 2 tools
A AC dynamo and rectifier to charger the batteray
FULL BRIDGE RECTIFIER! xD
and a rear light
And if very well said brother
Please keep upgrading it
Caraca quase bate no maluco de moto kkkkkkk 17:36
Someone needs to snatch this natural engineer up and turn the UTV industry on its head! Excellent!
Me and the boys going to a party
yoo dude that would be sick
والله انك فنان
at the next time，you can give lens close-up in CVT，we can know how CVT works
I totally agree with you 💯 % on that
it's basically the simplest form of torque converter. as it spins faster, the "wheels " are forced closer, causing friction to the belt.
@@russellmeier9526 Where find this cvt gearbox for Loncin 196cc?
Love this kind of video
Hey bro I would highly advise you wear closed toed shoes when working with metal shavings around. They get in and stay in for a while and it isn't pleasant
Safety consciousness. Good advice
Süper olmuş tebrikler. Ön lasiklere çamurluk ve arka vitese de geriye beyaz ışıklı far ekleyerek geri gitme ışıklandırması da eklenebilir. Üst panelvan bile eklenir. Emeklerinize sağlık gayet başarılı.
19:38 was that someone standing in thier birthday suit.?😅
ShawnieBeans 😂 wtf is my guy doing
Joe Anthony and how do you know this
That was his neighbor yelling "you get back here and f*** my wife" (the other guys reference) 😂😂
@@johnsherby9130 Probably with his eyes. It's not even hard to see he has clothes on.
Lolz. Looks like he was covering his already tiny pecker with his hand so yeah, I think he was in the buff.
Brilliant. Freaking brilliant. ;) Next, you need to build some mud guards and a fabric roof so you don't get wet in the rain.
Упоры дня ног надо от проскальзывания.
Он наверно ногами помогает поворачивать!
Seper kreatip indonesia 👍👍👍👍👍
I just want to be like U
Nice DIY video
CVT Gearbox..where to buy??
which online store you buy
We Like to see Another one of that tractor of you builded!
at least he didn't fin LED's on any bench xD
I am surprised he didn't 😁
Very well done! Now......if he could just make himself some shoes.....