The best way to clean this IAC valve is to remove the servo motor (black portion). Though it would be difficult to remove initially because it has a 5 point star pattern allen screw. Using a dremel tool, I created a notch on the screw so that I can open it with a flat screw driver. Then replaced it with the usual allen screw for easy removal in the future. With the servo out of the way, you now could easily spin that moving part while soaked in gasoline. Onced cleaned and dried would spin freely. No need for a lubricant as dust would easily stick to it which would easily gunk the flaps. Best way to clean iacvs.
I started having high rpm after my mechanic cleaned my Throttle body with Carburetor cleanser. I'm sure he didn't lubricate it afterwards. I'll try this, hope it resolves my problems
You said that you should not use carb cleaner to clean throttle body, it is not interchangeable.but it shows from the cleaning agent you use that it can be used to clean throttle body, carburetor and choke.
Before when carburator and throttle cleaner is in separate bottle. But i think technology have a way to combine. Always remeber when u see carb cleaner it is only for carb id throttle it is for throttle when it is for both it is safe to use in both
Mas maganda ma tangal mo ung solenoid part, 2 srews may dalawang bearings yan magkabila ng plufe pero naka fix, ramdam dun kung ayos ang pagkalinis kasi smoth ang ikot nya, oil dapat high temp para hindi matuyo sa init like synthetic engine oil.
My car Delays in idling.means when foot is off acc pedal its rpm does not immidiatly goes down to 1000. Remains on 1500 and after 5 ,10 seconds it goes to normal.plz any solution?
The best way to clean this IAC valve is to remove the servo motor (black portion). Though it would be difficult to remove initially because it has a 5 point star pattern allen screw. Using a dremel tool, I created a notch on the screw so that I can open it with a flat screw driver. Then replaced it with the usual allen screw for easy removal in the future. With the servo out of the way, you now could easily spin that moving part while soaked in gasoline. Onced cleaned and dried would spin freely. No need for a lubricant as dust would easily stick to it which would easily gunk the flaps. Best way to clean iacvs.
Thank you for your advice i will do that on my next video thank you again sir!
I started having high rpm after my mechanic cleaned my Throttle body with Carburetor cleanser. I'm sure he didn't lubricate it afterwards. I'll try this, hope it resolves my problems
That's why i discovered this. My mechanic also clean my throttle and got high rpm. Hope u solve the problem please let me know.. thanks!
I use carb cleaner, no issue for me. And be sure to remove the solenoid so that you can spin it while cleaning.
Thanks for the info.. when i use carb idle kicks up
@@CarHacksOfficial well, I guess you did not do idle relearn...
You said that you should not use carb cleaner to clean throttle body, it is not interchangeable.but it shows from the cleaning agent you use that it can be used to clean throttle body, carburetor and choke.
Before when carburator and throttle cleaner is in separate bottle. But i think technology have a way to combine. Always remeber when u see carb cleaner it is only for carb id throttle it is for throttle when it is for both it is safe to use in both
Nice content sir, thank you. More topic like that!
Thank u sir
Mas maganda ma tangal mo ung solenoid part, 2 srews may dalawang bearings yan magkabila ng plufe pero naka fix, ramdam dun kung ayos ang pagkalinis kasi smoth ang ikot nya, oil dapat high temp para hindi matuyo sa init like synthetic engine oil.
Thank you po sir
Intake manifold sir request ko kung kaya mo malinisan diy lang uli. Salamat
Sige po sir maraming salamat sa pag subaybay
Sana ito maka solve sa issue ng Jazz ko haha hopefully may tools ako pantanggal nito
Goodluck sir! Sana maayos na tlga problem ng kotse nyo po
Boss ano pinantanggal mo sa iacv? Haha star ung screw nya 🤣
@@ngek202 sir kung bukol kaya matanggal yan ng vicegrip na long nose or vicegrip na small
@@CarHacksOfficial ok will try din
@@ngek202 pag natanggal mo palitan mo na ng allen nakakabili sa mga motorcycle parts mura lang 15pesos isa. Para next service ok na
Boss baka pwedeng Tagalog na lang, nahihirapan kmi makinig...😆
Nahhrapan cya😅
Sir pag nag linis ba tayo ng IACV. Need natin mag relearn?
Yes po
My car Delays in idling.means when foot is off acc pedal its rpm does not immidiatly goes down to 1000. Remains on 1500 and after 5 ,10 seconds it goes to normal.plz any solution?
Try to clean that up.. iacv is the one who is responsible in idling and maintianing a good idling