✅ Fixing a Quarter Panel with a Use of SPOTTER
Вставка
- Опубліковано 8 чер 2024
- In this video I will show you a step by step process of how I metalwork a damaged quarter panel back into it's original location with some basic tools and a use of a spotter. With a use of a laser I'll figure out how far the the meal needs to be pulled back out. This is by far the easiest and fastest way that I've found thus far to tackle a repair such as this one.
Hot air station: amzn.to/3YvBmub
Leveling laser: amzn.to/3ZxXvH4
Tripod: https: amzn.to/3M6EKqZ
Quorter panel puller: amzn.to/3zpq0Mt
Heavy duty tie down straphttp: amzn.to/3U0Y3E5 - Авто та транспорт
Your tutorials are second to none. Great job!
Glad to hear that! I got more in the works!! Thanks for watching!
You’ve been missed. Great content. Keep up the good work.
More to come!
Glad to see you back!
Thanks man! I've got a lot of material that I got to push out 🤙
This is the info I’ve been searching for thank you !
My pleasure !!
I love all the thought and ingenuity you put into things
Me too!
Thank you very much, I appreciate that!!
Hoky crap this channel is gold for learning autobody
Glad you like my stuff, I posted another video just this morning, lots of great information that may be of interest...
Keep making videos. I have learned a lot from you.
That is the plan, my friend!! I will have much more stuff out shortly including some framework and all...
The way you approach problems is awesome and how you’re able to share your methods is so clear and smart! Thanks for another great video! 💪👏💪
You are so welcome! I got a lot more in the works 😁
Love how well you’re explaining everything!
I always give it my best, child!!
Sir your name should be called Mr DIY so much skill, perseverance, knowledge,you are a blessing, I'm learning so much have gained alot of confidence ,and you make everything look so easy, I will be going back to pass videos from your channel to gain more skills, can't wait till your next video,
Glad you like my stuff ! I got lot's more of that type of material in the works. Stay tuned !
Started to build a spotter my self thanks to your video still have it sitting on my table because I can't get it to work like yours😂 great videos keep them coming!
My Son and I did one according to his instructions for a school Science project and placed well! Fix has two versions. The first is the most simplest. Try it that way and hit the weld button for a manual operation with a quick zap, that will get the job done! Good luck, Phillip Hall
You can do it!
I love the way you work, how you process. very creative for sure. When you say "I need to do this..." and I usually say "how the heck are you going to do that..." and am surprised at your ingenuity when you get it done. Not sure what you do for a 9-5, but i wish you had a shop for your sake 😀😀
Thanks man, I do work at a body shop part time and spend the other portion of the time working on my own stuff at home 😉
Hello from Greece
Hello my friend!
Buddy, you do some really good work.
You are really a detailed person, keep it up!
Thank you, I try 😎
Great Job! You did the job perfectly!
Thank you very much! Cheers!
Спасибо мастеру за подробный обзор ремонта. И отдельное спасибо за лайфхаки с лазерными нивелиром и приспособлением для вычерчивания контура арки. Хотя кому то, последнее покажется банальным, но я до такого чесно говоря не догадался, постоянно прочерчивал штангенциркулем, не говоря даже и про вытяжку арки под лазерный нивелир, это вообще супер!!! Обязательно, применю эти лайфхаки в ремонте. Ещё раз огромное спасибо, что делитесь секретами в кузовном ремонте.
Андрей, благодарю за коммент!
Love these videos! Those body lines and creases can be soooooo frustrating!
I used to struggle with most aspects of metal work, now with a spotter tool it feels like child’s play :-)
Good job ,spotter is the best.
Thank you, that’s spotter is the best tool for the metal work!!
Amazing work sir 👏
It truly inspired me more to build my own body and paint shop soon
Currently working in japan
But im a Filipino planing
To start in the Philippines
Your videos is truly admirable 😮
Glad I was able to help and inspire :)
Welcome back. You have been missed a while. Keep coming great videos
Thank you! I got a lot more in the works!
Thanks for this awsome technic !! As always great work!!
My pleasure!
To remove the paint I use strep flap. Good job. Waiting for the next
Welcome back ❤❤❤❤❤
👍👍
Amazing! 👍
Of course the tools help a lot but how to use them is the most important and fine-tune needs a skilled hand
Very true!
Great work!
Thank you! Cheers!
I seen a lot of shade tree mechanic stuff and this is very good to watch I was very intrigued
Haha... thanks man!!
Fantastic job
Thank you so much 😀
Hello from Switzerland 😎
Hello from USA !!
Great job
Thanks man!!
Nice work!
Thanks!
Amazing work @ home 👍🏾👍🏾
Thank you 🙌
You are the best!!!
Haha.. I try 😎
Nice job. Smart.
Thanks Brian! Appreciate it !
Thanks bud. Enjoyed it. Cheers
Thanks man!!
Dang that looked like a hard one. You made it look like nothing. Great job on the line. So where do you recomend me buying a spotter tool to make one like yours from? Ive looked and looked but since ive found some in all different price ranges on amazon am worried to get a good quality one.
He has a video online on how he built his.
I left a link at the end of that video to the spotter build video
Have fun building it Phillip. It is a rewarding venture!
Phillip Hall
Nice done 💪💪
Thanks ✌
Nice work as usual. Glad to see another video, as your videos are always interesting and informative. I'll have to look into making a spotter some century when I have nothing to do, as one of our cars needs work similar to this. At the moment, I'm still setting up my new shop, which is progressing slowly, but taking up most of my time.
I built one thanks to Fix’es instructions and love it!
Phillip Hall
Having a shop sure is nice, I am currently in Florida for about a week where wife and I are looking at different areas to possibly relocate to. The place that I would be buying would have to have quite a bit more property then I currently own and preferably already have a shop on site or at least have a good spot for me to put the shop in... Hopefully it pans out!
@@fix206
Good luck Fix. I have a cousin in Panama City.
@@fix206 Hopefully you find a good property that suits your needs and you can relocate to a warmer climate and get rid of the snow. We moved here to Queensland about 30 years ago from New South Wales for a warmer climate, but the winters here are still a bit too cool for my liking (rarely below 35F at night with days rarely below 60F max, but way, way better than where we came from. We have five acres here, mostly bush (woods) and we have about an acre near the middle where we built our house and big shed, etc. Setting up my small shop at the moment and I realized that I need a wood shop as well for my woodwork stuff, so it looks like another shop is on the cards to build once I finish this shop. Then I need to extend the big shed for my car painting shop. It all takes time!!
Fantastic
Thank you so much 😀
More work as a spotter here ua-cam.com/channels/tn2211KFKUIahupgungE0w.html
Amazing
Thanks man !
Muito bom vídeo , excelente técnica.
Muchas Gracias Luiz!
Your amazing
I appreciate it! Thank you!
Love to watch every video you make. Nice job! No go and eat some щи !
Glad you like them! Thanks for watching!! Щи was delicious!!
Once you get your metal pulled as close to the measurements as possible, have you thought about using a contour gauge to replicate the proper contours off the other quarter panel to get the damaged sections as close to original shape as possible? What are your thoughts on this tool?
Once I tightened all of the metal up, for the most part everything went back to original shape so there was no need for contour gauge
That had been my finding as well.
Phillip Hall
I like your work I am a danter from Pakistan
Thanks man!
Excellent job. I'd like to know more about your homemade spotter tool?
Here you go: ua-cam.com/video/j6UgtCN5vzU/v-deo.html
Very nice job. I will be using some of your tips soon on my own restoration. Curious how long this project took you, in hours. Thanks.
I was taking my time working on this thing over the corse of 2 days, but If I concentrated on the task at hand and just got it done, I could have this repair complete start to finish in 3-4 hours
thank you for all the tips on doing body work im new to this field of work and trully enjoying this channel, also watched the spot welder video; question where can i get the same handle puller that you use to bring the dents out, the black one, 13:26 cause i have only found the slide hammer style on ebay and amazon
I bought that puller from Russia some time ago, and actually worked with the manufacturer to get a small shipment of them to USA which wasn't easy... So I have some available for sale if you're interested
Hello from Chicago area.Any tips for painting in cold weather ?
I have painted in freezing temperatures before with good results. Usually my main thing that I check for is that it's not going to rain or snow and also no windy or breezy conditions. Go lighter on material as you're laying them down so you don't run 'em.
Binge watching your videos! out of curiosity, how much would a job like this cost?
Job such as this one can range $500-700... It is much more economical than having to spend more money on a replacement panel and still pay the same amount for labor
Hi Fix, I hope all is well. Have you been doing any work on your old Chevy Truck?
Phillip Hall
Hello Philip, all is well here. Just keeping busy as usual, new projects coming in and I film everything... The old Chevy truck is on a bit of a hold at least until I get through all of the current work... I've been working on the next video off and on, hopefully it'll be out here and not so distant future 😀
Hi , can i ask , what umbrella are you using?
It’s just the patio umbrella that I’m using on my deck, but sometimes I bring it out front to keep myself in the shade as I’m working
Hi, I really enjoyed your content! How can we get in touch if we have additional questions? Thanks in advance.
What other questions do you have?
What is that screw type bottle jack? I've never seen one. I've only seen one with a handle.
The one that I used in the video I got out a chevy truck at the junk yard... It's an OEM jack that came with the truck
Have you done work on aluminum cars?
Not much... Working with aluminum is a paint in the A$$ !
Fix I had one of your videos bookmarked which always lead me to your channel. When I tried to retrieve it , the heading said it had been removed in violation of community guidelines. Just giving you a heads up incase you didn't know it. Unfortunately I do not remember which video it was.
Phillip Hall
Really? That's weird, I go into statistics of the channel and it shows that all of the videos are active, that's really odd !!
@@fix206
Fix I just double checked. I owe you a HUGE apology, Somehow I got my bookmark located out of sorts. That was some other video from some other channel. Sorry for the confusion..
Phillip Hall
Haha... No worries Phillip, it's all good !!
What do you mean my driveaway might not be level. It's a gravel round a bout on a hill. You can't get more level than that. Nice work as always though D.
I’m quite certain that you have the most level driveway Matthew 👌Thanks man!
I like the spotter tool why not make them to sell
As of now I do have the puller/ squeezer handle available for sale, later on I may set up some sort of a manufacturing for the actual unit that carries the transformer and all of the control electronics.
The links in the description for the tools don't work properly. They need to be copied and then pasted and then "https: //" must be removed to work
Good catch man! Appreciate the heads up, just got it fixed 👍
more better ecxelentt
Thanks man!!
Man you kind of look like man that play in all the adam Sandler movie...Steve Buscemi
Steve Buscemi? come on man.. That's an insult 🤣🤣
@@fix206 my bad LMAO
@@fix206 but I bought an acura mdx 2015 of copart for 4500 83k miles just been watching your videos for motivation to fix it
No worries man... Got more motivational vids in the works :)
@@fix206 Im subscribe and my notifications set to all lol
I don't learn anything your vedio
Pretty cool ! Thanks
Amazing job
Thank you! Cheers!