For $17 the 550 4gb is pretty good, if you spend more a 1050ti around here is about $35, RX580 8GB about $45. At the $80 price point any 4GB card is great.
@@StefanMicu yeah, I got really REALLY lucky. Of course they're all used parts and some Chinese sticks of RAM. But for now it'll do. Parts tend to be really expensive here in Brazil, but I just had tons of patience. I almost went with a laptop too haha
Joke's on them. I just installed Windows 11 24H2 on an E5-1650v3 (Haswell) machine. It is the RTM version so it is already being installed by OEMs - effectively the release version. That also means it will continue to receive updates and Microsoft wasn't bulsh*tting us when they said they would only block 24H2 on systems that lacked AVX2 support (pre-Haswell). So there's going to be 4 whole generations of intel hardware up for grabs for cheap, while still being able to run Windows 11🤣
I used it in the office for work years ago. I have it at home, upgraded with e3-1270v2 and gtx750ti with a riser to place it horizontally (you've to cut part of the cabinet). Good job dude 😃
I built a PC 3 years ago, an Optiplex 790 SFF i7-2600 with 16gb ddr3 RAM, GT 1030 2GB ddr5, which I upgraded the GPU to a GTX 1650 4gb ddr6, it still makes me smile when I play... I think it can't go any further than that, I wanted to upgrade to a 3050 6Gb ddr6, but I think it would cause a neck due to the PCI 2.0 port
my 4060 runs on a gen 3.0 pcie slot. it has the same performance as a 4.0 slot. i don't think it'll do thaaat much harm tbh, but the 3050 is an awful card to get.
i built a mid gaming rig from a hp elitedesk tower g1 800. it came with 320watt psu but i bought a psu cable adapter then put a 550watt in there. put 32gb ddr3 1600mhz ram in there and a gtx 1650 super oc 4gb. chucked in the i7 4790k and this haswell system has zero bottleneck at 1080p gaming. put an evo 870 samsung 1tb ssd in there also and done. you can also mod the hp bios then flash it to accept m2 on a pci e slot card. all together this system cost me only $300 nzd which is 139 pound in gbp or $182 usd- the funniest thing about this build is i used co pilot ai to help build it for zero bottleneck and it worked which made me laugh.
Have you ever tried a program (available on steam) called Lossless Scaling? I use it to play some newer games that my pc cant do. you set the game to windowed mode at a smaller resolution and it upscales it like... perfectly. half the time i cant tell im running a game at lower than 1080p with this scaler.
a lot of these old office desktops get thrown out and you can find them at recycling centers often for free or extremely cheaply, with bios updates a lot of them support xeons which can give you pretty great performance and run anywhere from 6$ to 30$, I have a few of them that are around the performance level of an i7 4770k or better, would recommend radeon wx series GPUs, sometimes flashing a gaming bios works when getting extremely cheap mining RX 470s - RX 580s (your mileage may vary), RAM upgrades are fun, not uncommon to find older RAM cheaply on local marketplace/classifieds sites, learning the basics of repairs and electronics recycling can make it extremely easy to get functional gaming rigs for almost nothing
Haha, didn't get to that point in the video, but yeah, I did almost the same thing with an e3-1240 v2 and a wx 3100, was able to play armored core 6 at 1280x1024 kind of decently lol
Its crazy how far down you can go and get a good experience. Earlier this year when my laptop broke I was stuck with an AMD AMD A6-3600, GTX 650 Ti, 12 DDR3, and a 2TB 2.5” HDD from that laptop and it wasn’t a fun time but I was still able to play some Minecraft, GTA 5, Fortnite, and somehow edit videos. You don’t need the most expensive PC to have a good time! I want to get a i3-14100 and RTX 3050 8GB to make a statement that you don’t need the latest and greatest to have a good PC still
For $20, I got a Core 2 Quad 8200, 4GB Ram, and a decent mATX mobo and all because it came in a case I thought I could use. I was surprised at how well this actually ran with Windows 10 so I threw in my old GTX 550 TI and was able to run older games quite well. I kept it that way for a couple of days until I noticed that the floppy drive wasn't working, and I found out this is an issue with Windows 10, which really irritated me. So I wiped it and went with Windows 7, as I really needed that drive to transfer small files to my Win 95 PC.
G'day UBPC, Builds like this are great to get Kids Gaming in RoBlox, Mincraft etc... & learning how to use a PC While not as Fancy or Modern as your one here I got the last part needed (CPU Tower Cooler) for my DELL "Upgrading to Gaming PC" Inspiron 530 😂. I got the PC a few years ago off eBay for $30AUD as "🤷♂I don't know why it keeps crashing trying to turn on & I took out the graphics card🤷♂" & has been sitting in a box waiting. It is an original Q6600 + DG33M03 running Vista, did some investigating & CrystalDiskInfo found the HDD was failing with a crazy amount of bad sectors, so I added my test R7 250 plus one of my spare DELL 500GB HDD & fresh Vista install worked perfect. Being in good condition including the Original "Windows Vista" & "intel Core 2 Quad inside" stickers (while upgrading to a In Win PowerMan 400W PSU to add PCIe 6pin) I thought I'd stick with a Period GPU of which I found a PowerColor HD4850 for $10AUD 🙃👎, but then... Giving it a run with CB R15 the DELL CPU Cooler fan is starting to make "Dying Noises" so I "Splurged" on the Silverstone KR03 92mm Tower Cooler for $15AUD, Super Happy as doing a good job running Unigine Tropics it will play heaps of my GOG DRM Free Retro Games for a total of $55AUD😁 ($38USD - £28.50).
The cheapest but still competent and actually strong mouse I have ever bought is a Tecknet model. I bought it for about 10 euros, about 10 years ago. I made a video on it several years ago on my main channel and I was not impressed because back then I found it too slippery. While that is not as important now that I have been using it for a couple of years as my daily mouse, it has a design that makes it easier to pressed the right mouse button when moving the mouse towards you. Not always, just some times. Which can be a bit annoying as you can imagine. Still, otherwise a 10 euros mouse which isn't malfunctioning, is relatively good for gaming and looks awesome, is in my book a great ultra budget peripheral. My point is, if I were going for a budget mouse now (and I hope I don't have to as I am now poor), I would look what new Tecknet has to offer.
Just put together an i5-4590 + RX 570 4g build for about $105. I found a killer deal on facebook for a Dell XPS 8700 for $72, offered $65 and he took it. Came with a 256gb mSATA SSD (kinda slow but better than an hdd boot drive) and a 1tb HDD. Super great deal, guy was super chill too. The RX 570 was just $30 off marketplace, lucky find too. The PC came with a good PSU, but it only had a dual 6pin so I had to buy an adapter off Amazon which pushed me juuuuust over $100.
I bought 4 8gb 2400G SFF elitedesk PCs off eBay for 50 each. The chip is really easy to work with, not the greatest CPU only performance, but it's going to sit under the desk and be the little workhorse. 6500t PCs seem to come in pretty cheap too. But I hear the Radeon iGPU comparatively punches with 8th gen intel iGPUs. Regardless, it's fun to work with. Do a little bit of gaming, and overnight rendering. I'd have to go on a part hunt if I wanted some half height GPUs. It's just a side hobby so spending full price is out of the question.
This is insanely weird, I literally finished my Optiplex build with very similar specs the same day this video got uploaded 😂 mine has the i5 4570, 16gb RAM and the same GPU as the non-upgraded version! I'm using it on my TV alongside my consoles for watching movies and playing some older titles. Great video, weird coincidence!
I'm planning to upgrade my 3020 sff with Intel pentium, do you know if the Pentium models share the same motherboard? I was planning on coping your build (after almost ten years an SSD and 8GB of ram aren't enough anymore 😂)
Number 15, Burger King Foot Lettuce. The last thing you want in your Burger King burger is someone's foot fungus. But as it turns out, it might be what you *gaet*.
I'm surprised that optiplex booted with a xeon in it given that oem bios often have a whitelist of available CPUs. This optiplex must use the same motherboard or at least bios as the precision towers get. I wonder if ECC memory would work in there...
Quality content as always brother, but is there any tips for looking for good OEM? Like is there any specific models that are more cost-efficient? Finding a pokemon is easier than finding a good OEM on ebay here in canada.
I can't quite say that I have a super extensive history of purchasing these OEM systems yet. So far, I've found the most success searching on eBay using fairly broad keywords like "Optiplex" or "Desktop PC" and then filtering based on my preferred specs. I'm sure knowing different models would be helpful in narrowing down, and maybe finding some more hidden listings.
Hello did u optimze it in any way or is that excatly when u build it and just did the oprateing system and played beacuse some tweaks and that computer whould prob get 60 plus fps if tweaked
Yeah, this is one way to go, although, an old i5 without HT really doesn't cut it for esports in 2024, let alone an i3. I just tested a 3570 with a Quadro K2200 (basically a 4GB 750Ti, which is Maxwell architecture, not Kepler) for an ultra budget esports rig I'm going to sell and I ordered a 3770 because I can't really make it fly with the i5. Ironically, it did best with BL3 and Cyberpunk at 1080p with a 30fps cap, absolute lowest settings and FSR at the "Ghetto" setting. However, because those aren't as CPU intensive as CS2 or Fortnite, it was a very steady, consistent 30 fps. I liked that it didn't frame drop when I drove through that one part of Night City. I played Cyberpunk for a few hours like that and forgot I was gaming on the absolute lowest spec hardware you could conceivably use to get a solid 1080p30. So I paid 3-4x as much on parts for my 'ultra budget esports rig' but I also don't get stutters in Fortnight on performance mode🤦♂ I also wasn't left with a heavy boat anchor of a PC that is expensive to ship. Lets say I sell it for $300....Well, go look at what you get on Amazon for $300. You'll probably get a Quadro K620 (AKA GTX 745 OEM), and a Haswell i3 in an old Optiplex with some RGB shoved in and maybe a vinyl wrap.
I had a bit more in my budget and I got a pc with i3 10100 16gb ram and 500gb of storage for 120€ and I just got myself a 1660 super and all that cost me 210€ and that pc performs really well
would something like this, or at least the upgraded version, be viable for a second, stream-only pc? would probably have to use an hdmi-to-usb converter bc of the lack of pcie slots, but they can be found for around 20usd so it fits the low-budget theme... i just dont know if the processor is too old to run OBS or if it could output 1080p/1080p60
You don't build 'em half janky, do you? 1246v3 on a Z97 using the iGPU as passthrough for the mining GPU equivalent of a 1060. What a waste of a Z97 MB. Especially when you don't even bother to use the NVMe slot. I'm sure the performance seems good in a vacuum. But in the real world, there are all sorts of reasons not to do this and just spend a little more.
The biggest problem are graphics cards, the used ones can break at any moment, because they were most likely refabs from mining rigs. The Xeon 2011-v3 rig is still totally useble albeit very energy inefficient.
Super impressive. I remember long ago when i had to make do with what I could get my hands on. Good times honestly. Many time way back when we were just happy to play with mid 20s fps. I remember i had juat graduated high school when crisis hit and my P4 1.6 syste at the time almost choked itself to death on it. Luckily the next year my buddy had gotten a core 2 duo e8400 and an 8800gt so we could play the crap out it at 720p medium.
I got a very good deal in my country for a tiny mini micro, a Lenovo P 330, cost me 72 USD (converted), it has an i5 8500T, 8GB RAM, and a SSD. Its super efficient, usually draws an average of 15 watts. But since its really small i can't really convert it to gaming pc without a low profile GPU. LP graphic cards are rare in my country so i can only find the rx 6400 new at around $120 😅
Its good to see a similiar budget build, I was able to get a whole lenovo thinkserver TS140 from my workplace for free! since they were getting rid of it. A whole tower with the same CPU, I upgraded the Ram from 8gb to a full 16gb and added in an 500gb SSD, tossed in a 750ti 2gb that I had laying around, costing me a total 74 bucks. Works great but not the best, could play all the titles in the vid and some to none triple A titles, also its definitely not photoshop user friendly. And just now bought that Xeon cpu as a upgrade 😁this will be my temporary system will I save up for something in the b450 AMD platform.
Hopping on the AM4 platform is not a bad idea even in 2024. Using something like a R5 3600 or 5600 for a few years still makes plenty of sense on a budget while also having no performance limitations for 1080p and some 1440p gaming
My strategy is to try and find PCs that already have a CPU and RAM in them. Often, these systems don't sell for much more than a bare bones system. I've seen 6th gen i5 PCs with RAM as cheap as $35 with some deal hunting.
If not for the price I would say go for a more modern system with an iGPU which will outperform this system, graphics included, by a long shot. But for the price I don't know. Good video.
I'd just say in most cases, spend a little more for a newer or more capable system that has an upgrade path but at a strict $100, there really isn't much more you can do that something like what I did in the vid.
I'm curious how a Ryzen 5 3400g system would compare to this pc. You would miss out on a discreet GPU but would be on AM4 for around $100 if buying an OEM PC
Yeah I think going with anything AM4 where you can at least have the potential to upgrade both the CPU and discrete GPU in the future is the better value path long term. I think the Vega 11 graphics of the 3400g would probably perform similarly to this k620 if not a bit better in some circumstances.
Oh, the xeon one instead of the i7 4th caught me off guard, I have right now an hp pro elitedesk I think with an i5 4690 on it, it could be interesting to use the xeon and put an RX 6300 on it, I can get them on my market for like $36 USD with shipping, I think its worth it right(?
I think it is an awesome value, especially if paired with a quality motherboard that supports Ryzen 5000 CPUs if you ever want to get a CPU upgrade in the future.
An 8700k is still a pretty capable chip. If you're running games in 1440p you could really get any recent mid-high end GPU but if that's not in your budget or you're using a 1080p monitor, I'd recommend something like a 2070/2070super or Radeon RX 6650 XT. A smaller and cheaper upgrade could be up to something like an RX 5700 XT or GTX 1660 Super/Ti but I'm not sure if that is a largely worthwhile upgrade.
@@MrModamanReviews Yes there are but not for i3 4130 cpu. For this cpu is overkill. I tested I5 4460 with 8GB myself. I think that would bet better trade off.
Sorry i don't understand, why you bougth an oem system without CPU RAM and storage? It would be more wise taking a complete system for that money. Or at least take a non oem pc without those component for easy expandability for GPU and psu. SFF system are just a source of complication without any real vantage.
The only reason I bought the barebones system that I did is because I already had both CPUs that I used on hand and plenty of RAM. Neither of which I had any other use for. Doing it that way allowed me to get use out of what I already had. In most cases, if an individual wanted to start with an OEM, the best value play is definitely to find something that has all or most of the needed components included.
@@UltraBudgetPC Hi, thanks for the reply but even more reason you should have bought any custom PC on which to mount the components you already had. Or much better sell those yuo don't need and take case, psu and better cpu used. The result would have been more efficient and with greater possibilities for upgrades down the line.
@@UltraBudgetPC I know that a lot also depends on the area you live in and what the second-hand market offers. But a case is very easy to find at a low price, perhaps with a PSU included. Otherwise your build makes perfect sense.
Bought a HP ProDesk with a i5 7500 with 16G of RAM and 256 GB SSD for 50 Euros (~60 US$), threw in a 1050ti and voila: the 100$ Entry level Gaming PC 😂
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
For 80$ I got i5 7400, 16gb ddr 4 ram, 256gb ssd and rx 550 4gb. I use it as tv pc, but it can handle even witcher 3.
Is 550 wort it for 60$?
@@AffectionateLocomotive no
@@AffectionateLocomotive To me no. I bought it for 370kc ~ 17$.
@@amdboy5873 DAMM. SO CHEAP ! ! my country sucks 50$ for r9 270.
For $17 the 550 4gb is pretty good, if you spend more a 1050ti around here is about $35, RX580 8GB about $45. At the $80 price point any 4GB card is great.
I just built an i5 7600 + GTX 1660 Super PC for just $150. Really happy with it
WHAT? THAT'S CRAZY
I bough my laptop in 2021 for 500$ with an i5 11300h (really good) but only a gtx 1650. Keep in mind this is a laptop version of it
@@StefanMicu yeah, I got really REALLY lucky. Of course they're all used parts and some Chinese sticks of RAM. But for now it'll do.
Parts tend to be really expensive here in Brazil, but I just had tons of patience.
I almost went with a laptop too haha
@@gtPacheko Yeah
Would the 1660 Super be a good pairing with an i7 8700k?
@@BREEZYM6015 It's about a 15% bottleneck (the cpu is weaker than gpu) but it's decent enough if you're a casual gamer
so many OEM PCs are going to flood the market once windows 10 support ends next year :D
Joke's on them. I just installed Windows 11 24H2 on an E5-1650v3 (Haswell) machine. It is the RTM version so it is already being installed by OEMs - effectively the release version. That also means it will continue to receive updates and Microsoft wasn't bulsh*tting us when they said they would only block 24H2 on systems that lacked AVX2 support (pre-Haswell). So there's going to be 4 whole generations of intel hardware up for grabs for cheap, while still being able to run Windows 11🤣
Rufus laughing in the corner.
yeah but rtm installs fine and small tweaks will get rtm on sandybridge
I used it in the office for work years ago. I have it at home, upgraded with e3-1270v2 and gtx750ti with a riser to place it horizontally (you've to cut part of the cabinet). Good job dude 😃
I love video about budget pc, like making use of something that exists without wasting it and can use it for those who need it
Woah crazy I just got 2 of those radeons for my home server. Solid card!
Nice work! I’m impressed.
IN THIS ECONOMY, BRO IS COOKING🔥
fr
I built a PC 3 years ago, an Optiplex 790 SFF i7-2600 with 16gb ddr3 RAM, GT 1030 2GB ddr5, which I upgraded the GPU to a GTX 1650 4gb ddr6, it still makes me smile when I play... I think it can't go any further than that, I wanted to upgrade to a 3050 6Gb ddr6, but I think it would cause a neck due to the PCI 2.0 port
my 4060 runs on a gen 3.0 pcie slot. it has the same performance as a 4.0 slot. i don't think it'll do thaaat much harm tbh, but the 3050 is an awful card to get.
i built a mid gaming rig from a hp elitedesk tower g1 800. it came with 320watt psu but i bought a psu cable adapter then put a 550watt in there. put 32gb ddr3 1600mhz ram in there and a gtx 1650 super oc 4gb. chucked in the i7 4790k and this haswell system has zero bottleneck at 1080p gaming. put an evo 870 samsung 1tb ssd in there also and done. you can also mod the hp bios then flash it to accept m2 on a pci e slot card. all together this system cost me only $300 nzd which is 139 pound in gbp or $182 usd- the funniest thing about this build is i used co pilot ai to help build it for zero bottleneck and it worked which made me laugh.
You can build a i7 2600 + gtx 970 system for 100euro
do it then
@@bluezenither7043 i already build multiple budget gaming pcs with this specs. I do it as a hobby
Have you ever tried a program (available on steam) called Lossless Scaling? I use it to play some newer games that my pc cant do. you set the game to windowed mode at a smaller resolution and it upscales it like... perfectly. half the time i cant tell im running a game at lower than 1080p with this scaler.
Love the budget builds!
a lot of these old office desktops get thrown out and you can find them at recycling centers often for free or extremely cheaply, with bios updates a lot of them support xeons which can give you pretty great performance and run anywhere from 6$ to 30$, I have a few of them that are around the performance level of an i7 4770k or better, would recommend radeon wx series GPUs, sometimes flashing a gaming bios works when getting extremely cheap mining RX 470s - RX 580s (your mileage may vary), RAM upgrades are fun, not uncommon to find older RAM cheaply on local marketplace/classifieds sites, learning the basics of repairs and electronics recycling can make it extremely easy to get functional gaming rigs for almost nothing
Haha, didn't get to that point in the video, but yeah, I did almost the same thing with an e3-1240 v2 and a wx 3100, was able to play armored core 6 at 1280x1024 kind of decently lol
You can buy an E3 Xeon for $15 and that is an i7 4770 🤑
Yeah the e3 1230 v3 is pretty good, just got one for my lil bros system.
Going for around 200 eur custom (non prebuilt) system.
Watch the whole video
Its crazy how far down you can go and get a good experience.
Earlier this year when my laptop broke I was stuck with an AMD AMD A6-3600, GTX 650 Ti, 12 DDR3, and a 2TB 2.5” HDD from that laptop and it wasn’t a fun time but I was still able to play some Minecraft, GTA 5, Fortnite, and somehow edit videos.
You don’t need the most expensive PC to have a good time!
I want to get a i3-14100 and RTX 3050 8GB to make a statement that you don’t need the latest and greatest to have a good PC still
For $20, I got a Core 2 Quad 8200, 4GB Ram, and a decent mATX mobo and all because it came in a case I thought I could use. I was surprised at how well this actually ran with Windows 10 so I threw in my old GTX 550 TI and was able to run older games quite well. I kept it that way for a couple of days until I noticed that the floppy drive wasn't working, and I found out this is an issue with Windows 10, which really irritated me. So I wiped it and went with Windows 7, as I really needed that drive to transfer small files to my Win 95 PC.
G'day UBPC,
Builds like this are great to get Kids Gaming in RoBlox, Mincraft etc... & learning how to use a PC
While not as Fancy or Modern as your one here I got the last part needed (CPU Tower Cooler) for my DELL "Upgrading to Gaming PC" Inspiron 530 😂.
I got the PC a few years ago off eBay for $30AUD as "🤷♂I don't know why it keeps crashing trying to turn on & I took out the graphics card🤷♂" & has been sitting in a box waiting.
It is an original Q6600 + DG33M03 running Vista, did some investigating & CrystalDiskInfo found the HDD was failing with a crazy amount of bad sectors, so I added my test R7 250 plus one of my spare DELL 500GB HDD & fresh Vista install worked perfect.
Being in good condition including the Original "Windows Vista" & "intel Core 2 Quad inside" stickers (while upgrading to a In Win PowerMan 400W PSU to add PCIe 6pin) I thought I'd stick with a Period GPU of which I found a PowerColor HD4850 for $10AUD 🙃👎, but then...
Giving it a run with CB R15 the DELL CPU Cooler fan is starting to make "Dying Noises" so I "Splurged" on the Silverstone KR03 92mm Tower Cooler for $15AUD, Super Happy as doing a good job running Unigine Tropics it will play heaps of my GOG DRM Free Retro Games for a total of $55AUD😁 ($38USD - £28.50).
now what about a ultra budget setup monitor and peripherals included >:)
The cheapest but still competent and actually strong mouse I have ever bought is a Tecknet model. I bought it for about 10 euros, about 10 years ago. I made a video on it several years ago on my main channel and I was not impressed because back then I found it too slippery. While that is not as important now that I have been using it for a couple of years as my daily mouse, it has a design that makes it easier to pressed the right mouse button when moving the mouse towards you. Not always, just some times. Which can be a bit annoying as you can imagine. Still, otherwise a 10 euros mouse which isn't malfunctioning, is relatively good for gaming and looks awesome, is in my book a great ultra budget peripheral.
My point is, if I were going for a budget mouse now (and I hope I don't have to as I am now poor), I would look what new Tecknet has to offer.
Just put together an i5-4590 + RX 570 4g build for about $105.
I found a killer deal on facebook for a Dell XPS 8700 for $72, offered $65 and he took it. Came with a 256gb mSATA SSD (kinda slow but better than an hdd boot drive) and a 1tb HDD. Super great deal, guy was super chill too.
The RX 570 was just $30 off marketplace, lucky find too.
The PC came with a good PSU, but it only had a dual 6pin so I had to buy an adapter off Amazon which pushed me juuuuust over $100.
I bought 4 8gb 2400G SFF elitedesk PCs off eBay for 50 each. The chip is really easy to work with, not the greatest CPU only performance, but it's going to sit under the desk and be the little workhorse.
6500t PCs seem to come in pretty cheap too. But I hear the Radeon iGPU comparatively punches with 8th gen intel iGPUs.
Regardless, it's fun to work with. Do a little bit of gaming, and overnight rendering. I'd have to go on a part hunt if I wanted some half height GPUs. It's just a side hobby so spending full price is out of the question.
This is insanely weird, I literally finished my Optiplex build with very similar specs the same day this video got uploaded 😂 mine has the i5 4570, 16gb RAM and the same GPU as the non-upgraded version! I'm using it on my TV alongside my consoles for watching movies and playing some older titles. Great video, weird coincidence!
I'm planning to upgrade my 3020 sff with Intel pentium, do you know if the Pentium models share the same motherboard? I was planning on coping your build (after almost ten years an SSD and 8GB of ram aren't enough anymore 😂)
Love your videos ^^
Number 15, Burger King Foot Lettuce. The last thing you want in your Burger King burger is someone's foot fungus. But as it turns out, it might be what you *gaet*.
I'm surprised that optiplex booted with a xeon in it given that oem bios often have a whitelist of available CPUs. This optiplex must use the same motherboard or at least bios as the precision towers get. I wonder if ECC memory would work in there...
Quality content as always brother, but is there any tips for looking for good OEM? Like is there any specific models that are more cost-efficient? Finding a pokemon is easier than finding a good OEM on ebay here in canada.
I can't quite say that I have a super extensive history of purchasing these OEM systems yet. So far, I've found the most success searching on eBay using fairly broad keywords like "Optiplex" or "Desktop PC" and then filtering based on my preferred specs. I'm sure knowing different models would be helpful in narrowing down, and maybe finding some more hidden listings.
i have an optiplex 780 very small. what would be an ideal gpu that i can run roblox at max graphics and record on?
Hello did u optimze it in any way or is that excatly when u build it and just did the oprateing system and played beacuse some tweaks and that computer whould prob get 60 plus fps if tweaked
Yeah, this is one way to go, although, an old i5 without HT really doesn't cut it for esports in 2024, let alone an i3.
I just tested a 3570 with a Quadro K2200 (basically a 4GB 750Ti, which is Maxwell architecture, not Kepler) for an ultra budget esports rig I'm going to sell and I ordered a 3770 because I can't really make it fly with the i5. Ironically, it did best with BL3 and Cyberpunk at 1080p with a 30fps cap, absolute lowest settings and FSR at the "Ghetto" setting. However, because those aren't as CPU intensive as CS2 or Fortnite, it was a very steady, consistent 30 fps. I liked that it didn't frame drop when I drove through that one part of Night City. I played Cyberpunk for a few hours like that and forgot I was gaming on the absolute lowest spec hardware you could conceivably use to get a solid 1080p30.
So I paid 3-4x as much on parts for my 'ultra budget esports rig' but I also don't get stutters in Fortnight on performance mode🤦♂
I also wasn't left with a heavy boat anchor of a PC that is expensive to ship.
Lets say I sell it for $300....Well, go look at what you get on Amazon for $300. You'll probably get a Quadro K620 (AKA GTX 745 OEM), and a Haswell i3 in an old Optiplex with some RGB shoved in and maybe a vinyl wrap.
I had a bit more in my budget and I got a pc with i3 10100 16gb ram and 500gb of storage for 120€ and I just got myself a 1660 super and all that cost me 210€ and that pc performs really well
would something like this, or at least the upgraded version, be viable for a second, stream-only pc? would probably have to use an hdmi-to-usb converter bc of the lack of pcie slots, but they can be found for around 20usd so it fits the low-budget theme... i just dont know if the processor is too old to run OBS or if it could output 1080p/1080p60
Hey,built a 70ish $ PC recently. Xeon E3 1246 V3, Z97 HD3, 4*4 d3 ram, P106-100 6gb, 240gb ssd. Runs CS2 at1080p, 100 fps low, no FSR. Black Myth Wukong 1080p, mid, 60FPS, at 50% FSR.
You don't build 'em half janky, do you? 1246v3 on a Z97 using the iGPU as passthrough for the mining GPU equivalent of a 1060. What a waste of a Z97 MB. Especially when you don't even bother to use the NVMe slot.
I'm sure the performance seems good in a vacuum. But in the real world, there are all sorts of reasons not to do this and just spend a little more.
@@Lurch-Bot A Z97 cost 10usd here, so , who cares
The biggest problem are graphics cards, the used ones can break at any moment, because they were most likely refabs from mining rigs.
The Xeon 2011-v3 rig is still totally useble albeit very energy inefficient.
Super impressive. I remember long ago when i had to make do with what I could get my hands on. Good times honestly. Many time way back when we were just happy to play with mid 20s fps. I remember i had juat graduated high school when crisis hit and my P4 1.6 syste at the time almost choked itself to death on it. Luckily the next year my buddy had gotten a core 2 duo e8400 and an 8800gt so we could play the crap out it at 720p medium.
I got a very good deal in my country for a tiny mini micro, a Lenovo P 330, cost me 72 USD (converted), it has an i5 8500T, 8GB RAM, and a SSD. Its super efficient, usually draws an average of 15 watts.
But since its really small i can't really convert it to gaming pc without a low profile GPU.
LP graphic cards are rare in my country so i can only find the rx 6400 new at around $120 😅
E5 1650 V3 , 32 gb ram, nvidia 1060 3gb, 256 gb ssd. i got fpr 200$ its doing okey in 1080p low/mid settings games. nothing more , nothing less. fine with my causal needs. ^^
I got i5 7500, 24gb ddr4, gtx 1060 3gb, 256ssd, 2tb hdd for 135€. And then people ask 200€ for less than that on marketplace…
Its good to see a similiar budget build, I was able to get a whole lenovo thinkserver TS140 from my workplace for free! since they were getting rid of it. A whole tower with the same CPU, I upgraded the Ram from 8gb to a full 16gb and added in an 500gb SSD, tossed in a 750ti 2gb that I had laying around, costing me a total 74 bucks. Works great but not the best, could play all the titles in the vid and some to none triple A titles, also its definitely not photoshop user friendly. And just now bought that Xeon cpu as a upgrade 😁this will be my temporary system will I save up for something in the b450 AMD platform.
Hopping on the AM4 platform is not a bad idea even in 2024. Using something like a R5 3600 or 5600 for a few years still makes plenty of sense on a budget while also having no performance limitations for 1080p and some 1440p gaming
My strategy is to try and find PCs that already have a CPU and RAM in them. Often, these systems don't sell for much more than a bare bones system. I've seen 6th gen i5 PCs with RAM as cheap as $35 with some deal hunting.
Buying the case you do limits the powersupply so you cant change it out for later upgrades.
If not for the price I would say go for a more modern system with an iGPU which will outperform this system, graphics included, by a long shot.
But for the price I don't know.
Good video.
I'd just say in most cases, spend a little more for a newer or more capable system that has an upgrade path but at a strict $100, there really isn't much more you can do that something like what I did in the vid.
I'm curious how a Ryzen 5 3400g system would compare to this pc. You would miss out on a discreet GPU but would be on AM4 for around $100 if buying an OEM PC
Yeah I think going with anything AM4 where you can at least have the potential to upgrade both the CPU and discrete GPU in the future is the better value path long term. I think the Vega 11 graphics of the 3400g would probably perform similarly to this k620 if not a bit better in some circumstances.
i got a hp elitedesk with an i7 6700, 16gb ddr4 and 240gb ssd for £59. for £25 i got a gt 1030 2gb gddr5, for a decent £74 htpc. would recommend again
Now a days it's really easy to pick up a bundle i5 3th gen + 16gb ddr3 + b75 mobo for under 65$.
U can get a i5 8400 (6c) with a GTX 1060 6gb for around $150….
And a 6c6t CPU really sucks for gaming these days.
@@Lurch-Bot better then the cpus he recommended
Sick video.
Turkish people searching a pc they can get under 12 months without eating:
Oh, the xeon one instead of the i7 4th caught me off guard, I have right now an hp pro elitedesk I think with an i5 4690 on it, it could be interesting to use the xeon and put an RX 6300 on it, I can get them on my market for like $36 USD with shipping, I think its worth it right(?
Did you get a Xeon for it ? If so did it work ?
i can build a PC with used parts like rx 5600XT + ryzen 5 2600 for $250 do you think that's a good combo for the price?
I think it is an awesome value, especially if paired with a quality motherboard that supports Ryzen 5000 CPUs if you ever want to get a CPU upgrade in the future.
Going the cheap route with an AliExpress MB and a Xeon E5-1650v3 will save you at least $50, while giving the same gaming performance.
@@Lurch-Bot nah, i would rather spend like $40 more to get an r5 3600 or rx 5700XT
Can I put a gtx 1080 into this?
I have chosen a Quadro K2200 over the WX 3100. It is a bit more capable and a bit cheaper.
Isn't that full profile tho(? so then not for SFF I guess
my first pc i built had a fx 4350 i got new for $75 and i used a 1050ti and i had one stick of 8gbs ram
I have a GTX 1060 6GB. What would be the best GPU to pair with an i7 8700k?
An 8700k is still a pretty capable chip. If you're running games in 1440p you could really get any recent mid-high end GPU but if that's not in your budget or you're using a 1080p monitor, I'd recommend something like a 2070/2070super or Radeon RX 6650 XT. A smaller and cheaper upgrade could be up to something like an RX 5700 XT or GTX 1660 Super/Ti but I'm not sure if that is a largely worthwhile upgrade.
maybe beter to build xeon based pc?
You could have made a much better build using a ryzen 5 3400G,which has Vega 11 as Igpu and is only costing 27 dollars on ebay.
Btw vega 11 is better than the gpu you used
it sure as hell wont be 100 bucks total though
I have the same cpu with a gtx 1050ti
But office pc are intel motherboard
me watching this video on a $3k laptop I rarely play games with... haha
I ones build an pc with a ryzen 5 2600, b450 d3sh, 16gb 3000mhz and an 2060.
16GB RAM totally overkill what about TDP is it safe ? Also these kinda strange not mainstream parts are kinda hard to find in other countries.
16 gb of ram is not overkill. There are now new games that recommend 32 gb of ram.
@@MrModamanReviews Yes there are but not for i3 4130 cpu. For this cpu is overkill. I tested I5 4460 with 8GB myself. I think that would bet better trade off.
the nintendo 3ds killer!!!
Hell yeah
How tf is the performance is so good for the price
I wonder how many folks are sitting watching this on an absolute NASA PC with two to three grands worth of parts in it? 😂
OEM is not reccomended.
they have different cable for each parts. so you need buy "converter cable" for that.
I got a gaming cpu for you for only $15
"Nah I'm sorry it's out of budget"
can i have th pc?
Used 8th gen mini tower costs about 200 here 😂😂
Sorry i don't understand, why you bougth an oem system without CPU RAM and storage? It would be more wise taking a complete system for that money. Or at least take a non oem pc without those component for easy expandability for GPU and psu. SFF system are just a source of complication without any real vantage.
The only reason I bought the barebones system that I did is because I already had both CPUs that I used on hand and plenty of RAM. Neither of which I had any other use for. Doing it that way allowed me to get use out of what I already had. In most cases, if an individual wanted to start with an OEM, the best value play is definitely to find something that has all or most of the needed components included.
@@UltraBudgetPC Hi, thanks for the reply but even more reason you should have bought any custom PC on which to mount the components you already had. Or much better sell those yuo don't need and take case, psu and better cpu used. The result would have been more efficient and with greater possibilities for upgrades down the line.
@@UltraBudgetPC I know that a lot also depends on the area you live in and what the second-hand market offers. But a case is very easy to find at a low price, perhaps with a PSU included. Otherwise your build makes perfect sense.
100 bucks throwing in window 😂
Bought a HP ProDesk with a i5 7500 with 16G of RAM and 256 GB SSD for 50 Euros (~60 US$), threw in a 1050ti and voila: the 100$ Entry level Gaming PC 😂