Plecter Pixel Blade Construction
Вставка
- Опубліковано 13 жов 2024
- Here's how to make a Neopixel blade!
It's a bit challenging, but if you take your time, and follow the steps you can do it.
Parts list:
Blade Tube:
www.thecustoms...
Tip:
Foam:
www.thecustoms...
PCB:
www.thecustoms...
Adapter:
www.thecustoms...
Neopixel Strips:
330 ohm Resistor
The thing that gets me is the scale of it. Everything looks reasonably sized in the video, but there's no real preparing you for just how tiny that resistor is.
Brilliant tutorial. Also, everytime you called your wire snipper "Snips," it made me think of Ahsoka. XD
lol I was thinking the same thing
i guess Im asking randomly but does someone know of a way to get back into an instagram account..?
I was stupid forgot my login password. I would appreciate any assistance you can offer me
@Cole Francis instablaster :)
@Marshall Clay Thanks for your reply. I found the site on google and im in the hacking process now.
Takes a while so I will get back to you later when my account password hopefully is recovered.
@Marshall Clay It did the trick and I now got access to my account again. I am so happy:D
Thanks so much, you saved my account !
I never knew i wanted this in my life
Pro Tip: When working with anything that requires complex assembly, test as much as you can before you put it all the way together. What that means is, put power to your leads before you do anything. You might have a bad light strip. If it's ok, keep testing as you go. Put power on your assembly as you go, in case you have bad connections/soldiers, etc. In other words, don't hot glue wires together only to learn later on that the damn thing won't light up and you have to rip it all apart! =D
Thanks Rob, the tape trick for the SMD resistor is golden. I'll use it.
@Jeremiah Bullfrog I usually put the headers into a breadboard and place the pcb into them, then solder. If the headers are only on one side, I like to use a ball of blue tack to prop up the other side so that the pcb is perpendicular to the header
Thing is, they at Custom Saber Shop do sell pre-made (soldered) parts. All that’s left is blade assembly/hilt wiring.
Also great audio in these vids. Its like Bob Ross for saber nerds! Thanks Rob and TCSS!
That last tip about the programming was gold! As simple as it is, I wouldn’t have even thought about it. Thank you!
brilliant and pedagogic teaching as usual rob, bravo
is there any chance that there will be an video of how to wire and install the cfx?
Nice! One of the biggest issue with lightsaber blades is the uneven lighting. This one looks fantastic. I also like the shade.
Thanks Rob!!, as usual, a great contribution to the community
I have written to you before after watching your videos and again I feel compelled to write and thank you on how well they are done. My wife on the other hand thinks it leds to more crazy hobbies. We actually live in the same town and hope to run into at some point if you are cool with that kind of fame.
Great video. I especially like that you didn't edit it so that it seemed like you just nailed it perfectly. Really helps to see all the little things that can get in the way and what you do about them, like wires not cooperating or bits of metal ending up in strange places.
I'm not even looking to touch NeoPixel until I can just buy the stuff prebuilt, but I love watching these videos anyway.
Just a little tip! When twisting and compressing the wires it will be much easier if you can warm them up a little first. Something like a quick pass with a heat gun to get the wires nice and pliable. Another plus when they cool they will be more set in that twisted position so that along with the hot glue will really keep everything all bundled up.
wow Rob even shows you how to build your own, what amazing guy
I don't have any LS and wasn't even planning to have one but I still watched your whole video, your way of teaching -specially the details- is amazing! I enjoyed this built!
Just getting back into lightsaber building, and this was a great tutorial Many thanks!
Your a generous person to share your knowledge with others. You sound like a very giving kinda person. Mahalo from Hawaii. Hope to try this project in the future as my first electronic project.
Bro your thumbnails make you look like a evil Scientist. I love it!
Awesome guide! I used it to build my blade. One thing that I did do differently is redo the halfway joint. The gap is bigger than the rest of the LEDs so it creates a black spot in the middle of the blade. So I just trimmed enough of each half and soldered them back together to get the gap to match the rest of the LED gaps. You'd probably have to do that first, otherwise, it'll throw off your original measurment.
"Boy, it feels good when the hardest part's over!" That's what I told Gently! =D
This looks very cool rob...top notch video as always bro. Can't wait for them to get the Neopixel Strips/ribbons in-stock.
These instructions are excellent, gave me the confidence to attempt it. And, success! The only thing I'd say to improve this is: Strongly consider replacing the stock wires with good quality silicone wires. I had my blade almost fully assembled, and was testing it, when one of the strips failed. Turned out: the ground line on one strip cracked off during the "twist the wires" step. The hot glue didn't protect it enough, and that's probably my fault. It didn't fail right away, but thankfully it did fail before I glued up the bottom adapter. Now, redoing all the wires with silicone will give them extra resiliency.
Brilliant! Love the use of tape to hold your electronices together during soldering. I havent built a saber since the pc 1.5 board was new lol I need a pixel blade!!!!
Just a fan. Hope you're doing well. Merry Christmas!! P.S. Love the work!
I have so much respect for your work, from the bottom of my heart, Thank you so much!!
Thanks for the vid just was able too do a repair job thanks again Rob 😃
Incredible tutorial. You are an excellent instructor.
Thank you for sharing this - very well described and executed tutorial.
Love this tutorial! It answers many questions that beginners like me have and show best practice when wiring these to the pcb. Thank you for sharing your knowledge!
Brilliant tutorial Rob! I know what I'm making this winter break... 😁
Thank you, Rob! Trying to build one of these was on my list.
Rob, that makes me want to dig out my MHS parts and build a new saber! Excellent video.....
Very good tutorial of this new Neopixel blade system!
You stated tgat we can purchase all the individual parts to assemble...where do we go to purchase?
New to this and want to build a saber.
Thanks and again...awesome video!
Dave P.
Whittier, CA USA
This video is a lifesaver. Thank you!
This is a wonderful tutorial. I’d recently read how there’s a slightly larger gap between LED’s at the point the neopixel boards are joined, which can cause a shadow in the blade. So some people trim this connection and resolder? Is this not always the case, or not recommended?
Yes, I would recommend doing that. I used this guide to build my blade and I did have that dead spot where the joint is. I would definitely trim and re-solder.
Awesome work , where can I get the materials to build this in the UK, and how do I make the actual hilt with the soundboard etc, thank you 👍👍
I was afraid to make the transition to a new blade technology (my current sabers are tri-cree), but this looks pretty solid.
Excellent installment! Might be doing this for a friend.
Might I ask what brand soldering tin you're using?
Apologies in advance if this is unhelpfully pedantic, but the "resistor" that you refer to at 4:04 is in fact a capacitor. Easy mistake to make as they look very similar in their surface mount forms. Surface mount resistors will usually have numbers on them that signify their resistance. I've never seen a SMD (surface mount device) cap with lettering; they're usually tan colored, sometimes white.
In this case the capacitor works as a so called "decoupling capacitor" and helps even out the power going to the neopixel, which are famously picky about power sources.
Bryan Siepert you’re wrong, it is a resistor
Rob always makes things look so easy. Lol -.-
@Jeremiah Bullfrog O.K.
Great instructional video for pixel sabers! The best I've seen so far. I'm not seeing that parabolic tip in the shop. Will it be available soon? Also, will there be a 7/8 one?
The tip will be a new item in the store very soon.
THANK YOU THANK YOU SO MUCH for this amazing video tutorial 👏🏻👏🏻👏🏻👏🏻🙌🏼🙌🏼🙌🏼
By any chance do you have any videos of types of boards that you can use for a lightsaber?
I would recommend a Proffie board V2.2, they work amazing! They can be a little hard to find though. I got mine from The State of Build.
You should make a showcase video so we can see the result in different light conditions etc...
Thank you for this very informative video.
In the parts list you have not linked the Neopixel strips or the resistor however. Since you offer a couple of different strips, which one are you using here?
Fantastic video! Does anyone know about how much money can be saved making one as opposed to buying one?
Don Saito at least $0
At maximum $100000
depending on where you source your parts and shipping and such, and using USD, potentially around $50-60? pixel blades are generally around $100-120, a parts build (assuming you have the soldering equipment) with the strips, the tube/foam/tip, the electronic components, I'd call that maybe like, $40-50.
Thanks for the serious reply.
@@donmak0427 you can get ready made neo blades from AliExpress for as little as 95$
That "film" actually is called tape in the industry!
Such a great tutorial! Thanks Rob!
50,000 projects I already have to work on at home and work that I never have time for, and no I have to build myself f'n a lightsaber too...
I'd suggest using a string thru the foam to gently pull the pixels thru
good idea!
Great Tutorial. Do you plan to do a video on how to connect to the Nana Biscotte V4 sound and speaker assembly?
Hey Rob,
Excellent tutorial as always, after finally getting my parts and preparing to assemble my CFX and Neopixel setup, I've run into a a discrepancy on a few other tutorials I watched out of curiosity. Some people stagger the strips so they can solder the tips together, without explaining if there is an actual reason to. Does this effect performance at all? or is it fine just to follow this tutorial to the letter and not connect the strip ends at the top?
I would think that wiring up the positive and ground at the top would be a pain, because they are flipped/opposite each other, you'd have two criss-crossed wires at the tip. The weakest voltage will always be at the furthest end (towards the tip) because of the relative resistance along the way. I don't see much payoff to combining them, and you might get a shadow from the wires you'd have to add. I did as this demonstration did and the light is even. I think you'll be better served making sure you have sufficient gauge wire feeding to the adapter in the hilt to ensure the best power transfer. I used 18ga and that seems to be pretty solid. One last thing: I took a tip from the wiring diagram of the Proffie board and put a 1000uf Sanyo electrolytic capacitor inside the hilt across the power leads to help give a quick boost on a large color or intensity change.
Pro Tip: When demonstrating video that close-focuses on your hands, make sure no buggies are dried/stuck to your fingernails. Your nose will love you for it! =D
will you be stocking neopixels soon as well? If not, which did you use here?
Watched a few of your videos,and planning on building my own saber,would like your opinion on what kind of soldering iron to use for this type of soldering.
My soldering experience is limited to RS hobby kits,the iron I currently have I feel the tip is to fat and I can't find finer tips.
Help please?
I know I'm commenting on a year old video...but could you use a pull cord to pull the pixel strips through the foam?
sure!
I need an old power & sound box for my LED build, saber works, just no power box or sound (I’m currently using a 9v to test it or show it) - the LED has its own little board - I bought it all from CSS in 2006ish
He’s the bob ross of lightsabers
Great tutorial!
This is...beautiful. Thank you!
This might be an already answered question, but could you use a heavier grade tube for this to make it more combat-ready? Great tutorial, thanks!
you do some fantastic work i want one
bob ross of electronics. i love it.
Thanks for the great video. Quick question. I’m the config file when you enter the number of pixels, do you enter the number for one strip or both combined, so 140 or 280?
My mind it's blowing up, the all i need to have a lightsaber much cheaper is to buy all from the description and a normal empty hilt ? 😲😲😲 Or i have to buy and something else ?
A few questions. I see, No inner diffusion tube, or wrapping leds in heat shrink or mylar. So with the new foam are those methods obsolete? And do you use a capacitor if so is it in hilt?
You can certainly do those things. I personally do not like to add any weight to the blade that is not absolutely necessary.
Is there going to be any tutorials on how to use a prizim v5?
You're the man Rob.
Anyone know what electronics to couple with this to get the switching colors, the start up and shut down light progressions and sound?? Thanks ALL!!
Proffie board for sure, I think the Crystal X as well. As long as the board supports Addressable or Neopixel, that should work.
Oi, quantas baterias 18650 e você esta usando, considerando que a fita de led é 5v?
Question: Why is the resistor needed? Does it matter which sound board you are using? I am using a Proffieboard v2.2, the configurator does not call for a resistor. Please let me know.
The resistor serves to limit the amount of power on the neopixel's data line. You do not _need_ it but they are strongly suggested to prevent possible damage to the first neopixel in the strip
learn.adafruit.com/adafruit-neopixel-uberguide/basic-connections
Great tutorial. I just wanted to ask, is there any problem with twisting the two Data wires together and connecting them to 1 pad only? The NXPL connector I am using only has a single datapad. I'm guessing not, but wanted to ask the question.
Do you have a video for the saber side of setting up the neopixel blade with the soundboard?
what about 3 led strips on a triangle support? is it possibly to learn this power? :D
Where I can buy man? Greetings from Mexico 🇲🇽
Is this series or parallel? And would this way of wiring be the best for cfx in 2022?
Any recommendations on where to get pixel strips that are as bright?
Now that you have done the blade are you going to do a tutorial for the hilt PCB with a NBv4?
Hi, so I've got a question that you most likely won't want to answer. Where do I find a detailed drawing so I can try building a none working light saber.... It costs way to much to get your awesome products to Australia...
I love your videos! Very cool!
Helpful as usual.
After cutting the extra strips from the neopixel. What number do you put in the SD card so that it will have full illumination?
What is the point of the resistor? I'm using a teensy board and I've never used a resistor with neopixles before, but I'm wondering if I need one
@TheCustomSaberShop What would you call that thing that's behind you in the opening of the video? I've been trying to find a tutorial on how to make one forever!
Rob at Genesis Custom Sabers made this tutorial for The Custom Saber Shop, and I think you're talking about the "start chart" in the background. See this great tutorial of Rob's start chart here: ua-cam.com/video/Y-krDRPSUR8/v-deo.html
I used parts from y'all to make this exact blade, the issue I'm running into is one of the strips won't light every time. Ive checked the connections at the bottom and it all seems fine. It appears to be a data line issue as the blade style will hang up on clash effects some times. Any tips on how to test the blade to find the bad connection?
Regarding sliding the pixel strip through the foam: Can you tie fine fishing line onto the end of the pixel strip and thread the line through with a rod and then pull it through?
In the early phase of building my first ever lightsaber from scratch, wanna go with neopixel, but have a question. What about the heat from LED's? Is it ok to stick LED strips just to each other, and not on even very thin metal paper strip (kinda) for the heat removal purposes? Will it not melt foam part?
this might be obvious but the hilts that works with these nepixel blades doesn't light up anymore right? i mean the hilt only
Excellent tutorial thanks!!
I can't seem to find the pre-drilled parabolic tip and the 330Ohm smd resistor on TCSS.
i would like to know this aswell :D
The tip will be a new item in the store very soon.
resistor...
www.thecustomsabershop.com/330-ohm-SMD-0603-resistor-P1415.aspx
@@MadcowGenesis Will there be multiple shapes of pre-drilled tips? Or just this new parabolic shape?
@@nanorex_designs I'm not certain if there will be more styles. The one I used was a sample.
hello, How do u power your saber? I have BFT LEDs and they require DC5V power, I cannot find an adequate power supply and was wondering if u or any other commenters would be able to help,
question, at 9:29 why are there two extra wires there that don't go to anything
how much does this cost to make? is it worth to make it yourself insteed of buying one?
What pieces would I need if I was to convert an in hilt 7/8 in blade to this neopixel?
Did you make that map on the right or did you buy it?
Is the resistor on the PCB i the blade needed if you have one in the handle? A bit confused as to when to use a resistor. I have one on the data line prior to the board. To bridge or not to bridge and when that is the question? Also using a capacitor in between the power lines.
You only need ONE resistor. If yours is in the hilt - then you can just bridge those pads where I put the resistor. A capacitor is only necessary if you have an small battery. I've never used one.
Is it necessary to add cellophane when building a neopixel blade?
Where can I purchase or how can I make a blue neon rebel base display like you have in the thumbnail?? Thanks!! :)
can you cut the wires more so you don't have to twist them a lot to fit them in?
Of the color range on this, is pink possible?