Це відео не доступне.
Перепрошуємо.
How to update Ford Sync 2 - Tips and Tricks
Вставка
- Опубліковано 14 сер 2024
- The purpose of this video was to help answer some of the most common questions I get from my How to enable navigation on Ford Sync 2 Video - Video Link - • How to Enable Navigati...
Items in Video: (Affiliate Links)
► OBDII OBDLink Adapotor - amzn.to/3VmPUcl
► USB Thumb Drive - amzn.to/2NvSSbx
► A13 Ford Maps (Newest one) - amzn.to/3WPhKyL
► A8 Ford Maps - amzn.to/2yjbdmu
► A9 Ford Maps - amzn.to/2UItwyL
► A10 Ford Maps - amzn.to/2Vt2JUk
► Sync 2 3.08 Update (English) - goo.gl/5Mt1Mx
► Sync 2 3.10 Update (Enligsh) - goo.gl/gZAbHU
► Nav App for 3.08 - goo.gl/c4gXeT
► Nav App for 3.10 - goo.gl/U2g1gw
► NaviPatch - goo.gl/p5u8mW
Questions? Come hang out in my discord server - / discord
My Gear: (Affiliate Links)
► Big Camera - amzn.to/2wJZUnj
► Small Camera - amzn.to/2Q46iha
► Wide Angle Lens - amzn.to/2oMlGCN
► Rode Microphone - amzn.to/2PDPqNu
► Studio Lights - amzn.to/2zsVmDu
► Voice Over Mic - amzn.to/2QYbN1C
As an Amazon Associate I earn from qualifying purchases.
► If you want to support my channel with a donation, you can do so here:
www.paypal.me/...
► Shop Amazon
amzn.to/2VBSC2C
Subscribe: goo.gl/xAu4w9
Follow DIY Reid on:
Instagram: / thediyreid
Twitter: / thediyreid
Similar Videos:
This video is provided for informational purposes only. The information contained in this video is intended to provide general guidance for this DIY project. As with any DIY project, there is the potential for harm to yourself or others and because tools, products, materials, techniques, building codes and local regulations are continually changing, DIY Reid assumes no responsibility for the accuracy of the information contained therein and disclaims any liability for omissions, errors, or the outcome of any project. It is your responsibility to ensure compliance with all applicable laws, rules, codes, and regulations for any project. You must always take proper safety precautions and exercise caution when taking on any project. If there is any question or doubt in regards to any element of a project, please consult a licensed professional.
Thanks for watching - Please Like and Subscribe - Product Links: OBDII ELM327 Connector - amzn.to/2C3kRNA, USB Thumb Drive - amzn.to/2NvSSbx, A8 Ford Maps - amzn.to/2yjbdmu, A9 Ford Maps - amzn.to/2UItwyL, and A10 Ford Maps - amzn.to/2Vt2JUk
Just completed the activation on my truck tonight. Followed your guidance and it worked. I got a free A3 sd card from a friend, so it only cost me $30 for the ELM from Amazon. Thanks a lot for doing the two videos on this. 🍻you’re the man!!!
I'm 68 yrs old & just want my car to work. I am so confused! I'm so tired of everything being computerized. But thank you for your help.
I want to say thank you for all your hard work on these videos, my upgrade was successful and the navigation is working perfectly your tutorials made the process so easy and thank you again.
You’re welcome.
Worked like a charm!!!! I did end up purchasing a 1-year Forscan license for 10 bux, but that is no big deal at all, and will certainly come in handy. Thanks SO MUCH, for passing this knowledge along!!!
- SilverBack Street Performance
Thanks so much for these really comprehensive and clear guides. Despite some nervousness I was able to install the navigation by following the steps, without any problems. The dealer quoted £130 just to 'scope the issue' with no guarantees it would be the final bill, so finding these instructions and being able to follow them is fantastic. Very many thanks.
i was having some confusion from the first video but this absolutely helped clear things up, thank you so much, will post back later with results :)
Great Stuff. I got lost on the Navi Path. You have to Press the actual image and it will say UNLOACKED. Boom it worked. Great Stuff!
It worked my man . I want to hug you brother , if you ever in south west Missouri hit me up . Thanks so much !
Thanks for the files!!!! Fixed my glitch and now NAV is working:) Thank you!
This tip video really helped. Got navigation working on my 2014 Lincoln MKZ! Thanks! Wish I had done this sooner.
great tutorials. the link provided with 3.10 version is dead. can you please provide the link for 3.10 or 3.08 is recommended?
The link to the 3.10 version is not working. do you have it elsewhere?
What is the navi patch for? I already installed the latest Sync 2 3.10 Update from ford. I still have the old map A4 SD card....what does the navi patch improve?
Great video. Easy to do and worked perfectly as described in the video. Love the Forscan tool.
3.10 is down anyone have an alt link?
Did you find it... I can send you what I used
Hey Ried just a few questions. I just got a 2014 Ford escape that was bought with Navigation already and software update 4.32. So first off will the 3.08 or 3.10 work if I'm in Canada? Second if it already has Navigation do I still have to do the ELM connector part? And last it has Navigation so do I still have to install the NaviPatch? Sorry I'm new to this :/ Thx for your time!
have a question for you, when I tried to install the navigation app the first time sync said that it could not install copy righted material through the USB port. It seemed to install the app anyways. It did not appear in the system information. Tried a second time still with no luck. I am trying the app for sync 3.08. am i missing something? I have made all the other updates and module changes. Do you have an idea of what i need to do? thank you
Hi, I just bought a 2016 with 3.08 Nav A10
Took card out to look at it. Put it back in, clicked it and it now says No SD card.
Tried with engine on and off. Tried taking it out and in aswell.
Nav was working until I took card out. Please help
Procedure for a master reboot?
hi, Reid,
I have a 2015 Cmax Energi with my Ford Touch SYNC2 and navigation version 3.7 MAP A6
do I need to upgrade the software and load the Navipatch or
just the Navipatch to get my A8 map to work
If you already have navigation you will only need an updated maps card. You may need to update sync version 3.10 as well.
Thank you Reid I got it to work you are awesome
Glad I could help
This can be done with out the OBDII.. do everything like in the video.. dl the 3.08 or 3.10 then load the patch open and hit unlock then do a master reset... worked for me
Only if navigation is enabled in the APIM. If it’s not you have to use the OBDII
So I basically install those onto a flash drive and plug the flash drive into my cars usb port? It will automatically download or do I have to select update? I’m sorry for all the questions.
Hi I have US ford focus 2012 ,right now car using in Dubai how can I use navigation uae map? Please advise me how can ?
Thanks
If I brought this to a dealer would they be able to upgrade my sync 2nd gen? I can’t do this lol
DIY Reid mate the links for the Sync 2 3.10 etc does not work, please help?
this video made me realize i just need to get a maps sd card and im good thabk you sir
Where’d you get it??
I linked them from amazon in description
The "Sync 2 3.10 Update (Enligsh)" link doesn't work in the description
Awesome right up got all that done and lost ambient light controls do you by chance know how to turn them on threw forscan
I love the Ford Sync stuff, it's awesome you can mess with them like you have. For an updated map dvd in my Denali it costs $180!!! How is that not free? I bought a $14 bootleg version and all the sudden it quit reading the disc. Time to burn a new disc i guess.
hello Dear
i've got the bellow information on the website :
SYNC Generation
SYNC 2
SYNC Version
3.6.1
does the update compatible for my car .... Ford focus Electric 2014
I did the process, have the small compass, Insert Nav SD card in the corner, did the navipatch and I even have the nav option in the menu, but my software shows no license and no navigation under the system info screen, still says 4.32. Every time I try to put the usb in, I get an error that says "one or more of the files you are trying to install did not install successfully". I know that i unzipped and transferred everything to to USB the correct way, im not sure what Needs to be done to fix the issue.
Are you doing the full update or trying to update the nav app only?
Hi - I have a A12 SD Card and I still don’t have access to maps… I even tried to reset the system and that didn’t work. Any suggestions? Have a 2012 Ford Edge running Sync 2nd Gen. If I bought A13 would it work or would I have same problem..? Thanks!!! Love your vids.
Did you have maps before and just upgraded to a newer maps card?
@@DIYReid I bought it used and it has the SD card I think it’s a a12 and nav never worked. Only the compass appears.
Thank you for the reply btw
You’ll need to do the steps in this video.
If I download 3.10 onto a flash drive and then what? I plug both into car and laptop and then it should update? I have an old MacBook.. not up to date. Hope that’s ok. Then I have a A12 sd card already.
Hello sir if the update did not succeed what will happen to my sync2 thank you
Hey there. Well done and thanks for sharing. Do you know if this will this work with an Australian Ford Ranger 2016 XLT Sync 2 system?
I just bought a 2013 Ford Explorer, and the SD card is missing. I bought a A10 card off of Ebay. Will this work? Have no idea what version that was on it prior.
@Andrea Rogers I'm having to buy a new GPS Module for it in the near future. Currently my GPS location is showing me to be a few streets over from where I actually am. I'll post an update when I get the new module installed.
What is the last version of sync 2 available for a 2015 mkz hybrid? How could I look that up myself? I just put a B11 update into my vehicle and it didn't seem to have to take any time to install anything. Should it take a while to update the maps to b11? The car system settings says it is b11, but its odd that it didn't seem to have to load anything.
Hi Reid. I’m on version 3.10. Your link to the download doesn’t work anymore, so I got one from forscan. I then tried to use the nav patch and set the background and tapped it and got the “Navi unlocked!!!” statement. I then master reset my car and I did not see the navigation information in my system information. I went ahead and did your nav app download on my usb from your previous video just to be safe and downloaded that to my car and it updated that. I then did the nav patch png background again, and master reset after that. That did not do anything either. Do you have any advice? I’ve been stuck on this a few days and can’t get it to work. Thank you!!
Hey would you know anything about 2013 Lincoln MKX I have the sync two system and my air conditioner keeps coming on by itself any kind of movement or even if I touch the bezel every couple seconds it comes on
Hey
Thank you for all the information! My navigation is now working thanks to all of your instructions. Question…my ambient lighting option now disappeared. Any idea on how to bring that back?
I have a FORD 2016 Territory ~ will this video help me get my system all up to date ?
Thank You
... slightly confused, I've never done this before
If I have a mft (sync 2) how can I add navigation? Would I need to hook up the antenna cable to the back of the aimp?
I'm a little late to the party. I just bought a 2014 Ford Escape. I updated Sync to 3.10. I got the update from the Ford Website. I have 2 questions. You said the update link you provide already has the Navigation App. Would the one I got from Ford have it? Also at what point in this whole process, do I install the NaviPatch?
Yes. I believe 3.10 comes with the nav app already. You’ll need to use forscan to enable navigation and nav patch.
I am on version 3.10 and update the Nav app it goes through the install but when I check the sys info it does not show it installed. I thought it might be install and just not showing it. did the obd change but still just shows info. How do I verify that NAV app installed.
Will enabling the navigation have any adverse effects on Sirius XM or is it completely unrelated? (2014 Escape-Sync2)
Guys i have a euro focus and can confirm the Nav app updates without issue, just remember to remove the memory stick when the unit reboots otherwise it will keep updating and rebooting all day :) also the NavPatch file works on the Euro focus. just need to wait for the OBD cable now to unlock nav fully.
I have the A10 map files. Can I use a USB stick to load them up? Is there anything special I need to do to get the maps to load after the Nav unlock?
Do you have a updated video on the last Sync 2 software?
I have a 2013 Ford F-150. It has an A3 maps SD card. Can I update with that SD card or do I need to update my SD card to an A8,A9, or A10?
I have a ford mondeo that has sync 2 v3.7 with nav- can I update to 3.10 using the update links? It wont mess up anything?
Como hacer para tener video player por USB sync2?
How do I add the navigation software? I've completed the software update but I having a difficult time adding the navigation software
I have 2014 Ford Escape i change the module out to navigation module. It showed navigation then ask for the update. Put the Ford 3.10 update in and Ford erased navigation. Can you help?
when i go to open up the Sync 2 3.10 Update link it says this Invalid URL - the link you are trying to access does not exist. is there another way to get that?
Hi! I downloaded the update and installed it successfully to 3.08. My navigation says 4.66. I have a A4 card in my 2011 explorer. Even with the install when I open my navigation I still have a x over my GPS and it thinks I'm in another city. What else do I need to do?
Hey Reid, I'm not sure if you'll ever see this comment but your download links for later versions of Sync aren't working anymore.
hi
thank for your video
can i use mac for forscam?or just windows?
Sync 2 3.10 update link on mega is down, pls reup?
Thanks everything worked perfectly 👍
Glad it helped you.
Hello, when you click on the link for the update 3.08 it takes you to something MEGA, where do you click to download the update? Thanks
Downloaded 3.08 it started installing then image popped up saying updating sync image now it keeps booting up in same loop. need help plz
Im With The same issue
Some of the links you listed are on amazon coming back as not Available . The 3.10 update came back as not available
Could you please provide an updated link to the 3.10 Update? Thanks in advance.
Did everything and all went good. Only thing I don't see the navigation app version in the help system information screen. I have sd card on order so I need that in there to see the nav app version?
have you had any luck getting the nav app to appear if so how did u do it?
This really works! Just did it on 2013 explorer
On a side note! I did 3.10 sync 2 update then forscan then the Navi patch!
After master reset the I information changed to add nav sd card. It wouldn’t read it until I did the 3.10 nav update
i am looking for some help
i got 3.10 to load but there is nothing in system info about maps.. i dl the Nav App for 3.10 and unzip and tried it sync is telling me it needs to be on root level ... it is do i need to use 3.8
The 3.10 download is no longer available. Is is critical to have it or will the 3.08 suffice? Thank you for sharing your videos.
3.08 works fine. Or go to the Ford sync my ride website and put your VIN in and it will show you the 3.10 download for update.
Do you need 3.10 for an A11 card?
I have a 14 f350 lariat that has heated/AC seats and a heated steering wheel. They aren't "turned on" do you know how do that in sync2?
Yes. You can enable them with Forscan. Go to forscan.org.
Ok, I will look in to it. I just ordered the obd2 cable
If I had have navigation installed when I bought the vehicle and have upgraded to 3.10. will the nav app listed in your discription update my map to the current version or just give me the ability to have navigation on my sync 2? thanks in advance for reply
The maps sd card dictates what maps you have.
I wonder what else you can do in the software
Can You please help me, I did update and now have blank screen. How can I reach you? Pleaseeeee
I have version 4.32. Do I need do download 3.8 and 3.1? Or just 3.1?
Is there a new version on the sd navigation card?
I have 3.08 on my car but not the nav app. Will your nav app work for Europe do you think?
Mega file for 3.10 is not available
hi, how can i put climate in right down on sync2 like you? i have date in that place
Thank you! Finally it worked
I have a question I have F-150 2013 how do I know that I have navigation
Does it say information on the top right quadrant
@@DIYReid I will check tomorrow morning in I will ask for advice.
@dominicnunez8187 sounds good
Hi I checked the top corner and you're right the top corner said information, I ordered the SD card as you requested and it's in the way what should I do next. ??
Soo do you have to install 3.08 before 3.10 or can you just install right to 3.10?
You can go right to 3.10
@@DIYReid Awesome, thanks for your video. I never would have known that the 4.29 was outdated. I went right to 3.10, took a chance on ebay for the a10 card. All is working. Now onto fixing my wiper not working issue, unrelated.
Anyone know how to set up speed camera warnings, my wife has it on her 2015 ford focus but I dont on my 2016 Ranger Wildtrak ?
i have sync 3.5 is sync 3.10 newer or what ? sorry for that dumb question
Yes. Sync 3.10 is way newer. I explain it in the description
That’s great 👍🏻, do you know about a app for use CarPlay in sync2?
There isn’t.
Hi. I just bought a 2013 F-150 Platinum with 8 inch touch screen. The update worked grade to upgrade to 3.08. I tried to repeat the process for the navigation app. It appeared to freeze on 1 of 2. Does this install take a while? I was worried and pulled the stick. Should I expect this to take similar or as long as the sync update? Is there a chance the file is corrupt? I know it has been some years. Thank you
File is not corrupt. It can take some time.
Ok so I have watched this video, done everything the same way you have explained. I hit "begin installation", I am still getting a "File not found: please check that the installation file in in the roost directory of your storage device."... I have done exactly as you have showed. What am I missing here?
Can you send me a picture of your root directory of thumb drive via twitter or instagram?
@@DIYReid Yes, give me like 2 minutes.
I shot you a picture to your twitter
@@DIYReid Did you get it?
I watched the video did everything you said to but when I plug the thumb drive in a message pops up and asks if the root directory in on the thumb drive, and will not load the update. Not sure what I am doing wrong?
Are you putting the folder on the thumb drive? If so take the contents out of the folder and put it on the thumbnail.
I had already updated mine to 3.10 from Ford's website, which is when my navigation disappeared. I downloaded your navapp for 3.10 and it installed very quickly. After I turned my car off, the screen went black and hasn't returned. No functioning screen, no radio, nothing...
Everything works now, after driving around awhile, the SD card loaded all good!
Unable to down load 3.10 from link says it has been removed?
So what are my options if I have the 4" screen that is not touch. 2013 ford escape. It defaults to line in and pisses me off lol.
sync 2 v3.10 link is bad. kindly fix
I'm going to go give this a try. The Ford instructions say to format the USB drive to EX-FAT.
Yes.
It worked. Your method of formatting the thumb drive to FAT-MS DOS worked like a charm. I kept getting an USB error when it was formatted as EX-FAT, which Ford recommends.
Thank you for the information
Do i have to find EU firmware or I can use the ones you provided?
Trying to download navipatch you listed is not letting g me download. I was able to update perfectly and easy.
Thanks for the video! Would the OBD scanner work with 2013 Lincoln MKZ?
Yup
I have completed updates and installed everything and it's working fine but I forgot to do the master reset do you recommend doing it now?
If it’s working then don’t worry about the master reset.
I did the Navi app and it said unlocked, I then installed navapp 3.08 bc that is my version. I performed master resets after each step, however my settings still do not show navigation version so I'm not sure if anything worked. Did that only show after updating with forscan? Also am I okay using a regular default image after unlocking with Navi?
It will only show when you have the maps sd card installed.
I cant get this too work. I am following exact directions to a T on the video. It still don't work in my 2016 Explorer. Help. Can anybody send detailed directions?
Is the A12 Compatible with this?
Yes