so relaxing to watch , I mean probably not for Jake as its a bus mans holiday. But I do really appreciate the time that goes into making the videos. Very impressive skills on the tools :).
Thanks, I do like making the vids, information is helpful to everyone and I like it when people explain what they are doing to me, so I try to do the same for you guys. Thanks for watching.
Tha is a question that might be a bit out of line with this filmclip, but I do not find the answeres anywhere so I’ll try here. I’m thinking that I would buy an FX Maverick. Where I live they come in two different ”shapes”. One of them is called ”compact” that one has a barrellegth of 500 mm, and then there’s one called ”sniper” with a barrellength of 700 mm. The sniper model can not be bought without a license. I think the difference between them have to do with how much the legal speed is on each one of them. Is there any way to ”customize” the compact model to get the same effect as the ”sniper” modell? I’ve done that once before by switching the transferport into one with more airflow. That was on a fairly cheap airgun (Artemis 900)and it worked quite nicely. Now Im into having a way better airgun that’s why I ask you. Donyou have any idea if that’s what will work on the Maverick I’ planing to buy. I guess I’ll have to buy a new barrel and a tranferport, but would that donthe trick ? Hopefull for your answere an plz excuse my poor English as I’m not fluent.
That should work, the longer barrel gives you more power so you should be able to swap in the longer barrel and you may have to re-tune the rifle (Check the FX airguns youtube channel), Thanks for watching.
When changing the transferport to one with better airflow, is it important that the opening is pointing upwards? I have’nt checked but could it be that locking down the the liner with the transferport in place could only be done in one way? As always thankfull for answeres. And thanks for all the info in your channel ///Christer
Next time I get some range time ill do a before and after with the supports and if they make a noticeable difference ill put some on eBay. Thanks for watching.
Very nice work. You obviously have a DRO on your lathe, is that right? I'd say a video on your machinery is in order so we can understand how you do this kinda work. Cheers
so relaxing to watch , I mean probably not for Jake as its a bus mans holiday. But I do really appreciate the time that goes into making the videos. Very impressive skills on the tools :).
i concur verily
Thanks, I do like making the vids, information is helpful to everyone and I like it when people explain what they are doing to me, so I try to do the same for you guys. Thanks for watching.
Nice work. Well done. I used to enjoy machining brass. A lovely metal to work with
A lot easier than stainless steel, turns and mills a real treat. Thanks for watching.
@@sub12airgunners I bet it is. Never worked on stainless.
Tha is a question that might be a bit out of line with this filmclip, but I do not find the answeres anywhere so I’ll try here.
I’m thinking that I would buy an FX Maverick. Where I live they come in two different ”shapes”. One of them is called ”compact” that one has a barrellegth of 500 mm, and then there’s one called ”sniper” with a barrellength of 700 mm. The sniper model can not be bought without a license.
I think the difference between them have to do with how much the legal speed is on each one of them. Is there any way to ”customize” the compact model to get the same effect as the ”sniper” modell? I’ve done that once before by switching the transferport into one with more airflow. That was on a fairly cheap airgun (Artemis 900)and it worked quite nicely. Now Im into having a way better airgun that’s why I ask you. Donyou have any idea if that’s what will work on the Maverick I’ planing to buy. I guess I’ll have to buy a new barrel and a tranferport, but would that donthe trick ? Hopefull for your answere an plz excuse my poor English as I’m not fluent.
That should work, the longer barrel gives you more power so you should be able to swap in the longer barrel and you may have to re-tune the rifle (Check the FX airguns youtube channel), Thanks for watching.
When changing the transferport to one with better airflow, is it important that the opening is pointing upwards?
I have’nt checked but could it be that locking down the the liner with the transferport in place could only be done in one way?
As always thankfull for answeres. And thanks for all the info in your channel ///Christer
Great work as usual jake, always a pleasure to watch a master at work
Thanks again! good to hear Phil.
I am just astonished by the work you do! Great stuff!
Thanks, much appreciated, Thanks for watching.
excellent video. where can i buy some of those delrin/oring for aligning the barrel?
Some nice machine work there , do you also have an interest in the older guns Rapids ect
Yeah I just got a Rapid MK1, going to try and make a copy of the block with a few little upgrades. pic rail regulator. ect. Thanks for watching.
@@sub12airgunners looking forward to that ,you will know there is a huge cult following with them I have a Mfr and have a Raw HM1000x on its way
And again very impressed with the work, if you ever decide to sell any of these products i will be a regular customer 😁👍👍👍👍
Next time I get some range time ill do a before and after with the supports and if they make a noticeable difference ill put some on eBay. Thanks for watching.
@@sub12airgunners brilliant stuff mate keep up the good work. Big fan 😁👍👍👍
@@sub12airgunnersDid the spacers make a difference? Are you selling them?
Very nice work. You obviously have a DRO on your lathe, is that right?
I'd say a video on your machinery is in order so we can understand how you do this kinda work. Cheers
yes we have a DRO and a workshop vid is coming 😀
are the liner tool on ebay ? would love to buy one . great engineer great videos
Not at the moment, but ill make some in the coming weeks. Thanks for watching.
Split clamp tool was cool , I always cringe when Ernest would grab it with pliers.i just use the drill chuck 😂
i would love if you go into more detail on inserting the oring for the probe
Can do, making another Crown vid so ill put a new breech seal in on camera. Thanks for watching.
Thanks very much. Very useful and very cool video 👍
Awesome work love that very usefull
Glad you like it
Best 👍👍👍
Thank you! Cheers!
@@sub12airgunners you're welcome 🙏🙏
Keep up the excellent work gentleman
thank you 👍
Boy Got SkiLLs 👊🏼😎✌🏼
Thanks Mark. Much appreciated.
Are these for sale with shrouds take my money 😂
Amazing work amazing content
sorry we don't sell them ☹
Great job as usually .👌👌👌
Thanks a lot 😊
Hi do you sell the liner spacers?
Once again, spot on bud👍
Glad you enjoyed, thanks for watching. 👍
Awesome video wish you were my neighbor
Hello, what model lathe is it?
Hi it's Warco GH 1230 it's a great lathe for the money 👍
@@sub12airgunners thanks
Hello I’m from Cambodia I can buy gun how much