Really clean conversion dude, you convinced me to do my own. One question regarding the rail placement, though: did you experience any fitment issues with the earpro, or do they fit relatively well?
For those here in 2024: These 132B shells are like $200-250+ on eBay now. But, you might find a cheap auction. Keep your eyes peeled. (October 2024) Surplus ACH and MICH from Gentex or MSA are about the same now on eBay. But, these are at least good-to-go as-is. You can modify the ears with a sharpie and a cordless jig-saw. (it's WAY easier than you think.) Happy huntin' boys.
We tested it at the range. Video in the works. It stopped both 9mm FMJ rounds from about 10 ft away. 5.56 and .308 went right through it. So it’s basically IIIA rated.
Question: Are you stating that either the MED or LG FMA helmet will work as a parts donor to the DH-132B S/M shell? FMA doesn't have a M/L option, they seem to only a M or L option. So its one or the other, not a combination...
They are ballistic. They are rated IIIA. Whats the point of buying a helmet of like 1500$ that stops the same bullets? Even some chinese junk nowadays are rated IIIA
Finally got around to building my own, Thanks for the inspiration man!
Plan on doing this very soon, thanks man you saved me at least $600-800
Really clean conversion dude, you convinced me to do my own. One question regarding the rail placement, though: did you experience any fitment issues with the earpro, or do they fit relatively well?
Sheeeeesh this is really good
Also the R6Siege theme at the ending
For those here in 2024:
These 132B shells are like $200-250+ on eBay now. But, you might find a cheap auction. Keep your eyes peeled. (October 2024)
Surplus ACH and MICH from Gentex or MSA are about the same now on eBay. But, these are at least good-to-go as-is. You can modify the ears with a sharpie and a cordless jig-saw. (it's WAY easier than you think.)
Happy huntin' boys.
Hey man I was wondering if you knew if I'm supposed to use a bit a little smaller than my screws or larger? I'm not sure
Thanks for this.
Im in a styker unit and we have SOOOOOO MANY OF THESE that are not on the books
Maybe some could fall off of a truck 🤔
Dude do you also sell these on ebay? Cause they sold out last night? Its awesome though thanks
No, I don’t sell the shells.
I just won one with that insert
Is there anywhere I can buy that specific insert ?
Awesome build man. I think i’m gonna do one soon as well. Thanks for the clear directions in your video. Keep it up.
What rails are you using?
Is there a place where you can buy the parts separate or do I have to buy a whole other helmet to get the parts for the one I already have lol?
Where did you get that helmet liner from? Is that also FMA?
The link for the bump helmet ships from overseas (~$35 in shipping) is that where you bought it?
THIS guy is yanking people’s chain…THESE ARE NOT “BALLISTIC” helmets!
@@m118lrthese are ballistic, he even made a video shooting it that proves you wrong by showing its 3a capabilities. Stop spreading misinformation…
Where does someone find a shell??
Hello I was wondering if shroud that comes with the helmet in the description is plastic or aluminum? Or do you need to a an aluminum one separately?
It’s aluminum 👍
How did the FMA stuff hold up?
Where can I get the rails, pads and suspension from
Ebay, surplus stores, websites, br careful there’s a LOT of chinese weak, bad manufactured knockoffs straps, pads etc.
Dose anyone know if these are these bulletproof ?
We tested it at the range. Video in the works. It stopped both 9mm FMJ rounds from about 10 ft away. 5.56 and .308 went right through it. So it’s basically IIIA rated.
Ah damn I just saw this I was gonna get one off eBay but they’re all sold out now thank you for replying tho
@@Skankhunt556 Depending on which shell you get, this is because some are built with kevlar, and some are built with fiberglass.
Where can I buy a helmet cover for this?
Most FAST covers *should* work, Ur Tactical has one that I've been told works pretty good.
Question: Are you stating that either the MED or LG FMA helmet will work as a parts donor to the DH-132B S/M shell? FMA doesn't have a M/L option, they seem to only a M or L option. So its one or the other, not a combination...
what ever size YOU use, will fit in there. i measured my head and fell into the L option. fits like a charm
basically, the M and L are the same shape outwardly...the shape changes inward, if that makes any sense.
@@stryk3r Got a link or info for head measurements and which items?
Where did you get the shell from?
eBay
@@garrettnalle6949 thank you...
@@AusJackal no problem man!
wow…
For the guys wondering about the bits, I'm pretty sure they're cobalt bits
Marpat=gay
Whateverrrrr..’ballistic’!? THESE AREN’T Ballistic helmets! Come on man…shameful. Saving OVER $2K! Ohhhh man…
I wear com helmets like these at work they are only to stop fragmentation and like small pistol rounds MAYBEEE IF THAT
@@jesuschavez4231thats what 3a is for… pistol rounds and frag…
Level IIIA is rated up to 44 magnum boys
They are ballistic. They are rated IIIA. Whats the point of buying a helmet of like 1500$ that stops the same bullets? Even some chinese junk nowadays are rated IIIA