Willys MB Basic Installation Of Wheel Bearings And Inner Seals G503 TV

Поділитися
Вставка
  • Опубліковано 11 вер 2024
  • Video showing basic installation of packing wheel bearings with grease and installing them into the races or cups in the wheel hubs. Installation of Exclusive RFJP Double Lipped Inner Seals included.
    Part of the Team G503 / G503 TV Video Series on UA-cam.
    www.rfjp.com/p...
    www.rfjp.com/p...
    www.rfjp.com/p...
    All parts provided by Ron Fitzpatrick Jeep Parts.
    www.RFJP.com
    2019

КОМЕНТАРІ • 12

  • @453421abcdefg12345
    @453421abcdefg12345 5 років тому +2

    Excellent advice on bearing care ! I think most people think it is OK to throw a greased bearing in the grit on the floor, then complain when it is knackered in 500 miles! Chris B.

  • @dinofalabrino5406
    @dinofalabrino5406 5 років тому +2

    Double sealed-Great idea. Thanks Scott for another great video.

  • @edstransitscott9186
    @edstransitscott9186 5 років тому +3

    Great, I was sitting here waiting for new video, Good to know

  • @johnholcomb5578
    @johnholcomb5578 5 років тому +1

    Yep, only way to pack a bearing. You know its loaded right

  • @f18horse
    @f18horse 5 років тому +1

    Is this the same red grease Scott has been using throughout the resto? If so, where can I get some?

    • @TeamG503
      @TeamG503  5 років тому

      Yes, it is. I purchased it at Auto zone. Sta-Lube is the name of the manufacturer.

    • @TeamG503
      @TeamG503  5 років тому

      Heres a link, Amazon carries it.
      www.google.com/search?q=sta-lube+premium+red+grease&tbm=isch&ved=2ahUKEwjp94WW3dvfAhXJs1MKHdbnCOEQ2-cCegQIABAC&oq=sta-lube+premium+red+grease&gs_l=mobile-gws-wiz-img.3..33i299l3.24519.33913..34639...0.0..2.510.3289.28j2j1j5-1......0....1.........0i30j0i24j30i10j33i10.6TY8sGT1dlo&ei=mE0zXOnLE8nnzgLWz6OIDg&rlz=1CDGOYI_enUS616US616&prmd=svin&biw=375&bih=551&hl=en-US#imgrc=vSGSucugtiVTHM

  • @CTrane82
    @CTrane82 3 роки тому +1

    What happens the seal it it’s slightly past flush? I just installed new seals and the bearing and seal tool wasn’t big enough so I went just past flush. Do I need to re do the whole thing. I really don’t want to take it all apart again but I will if I have to hahaha. Thanks

    • @TeamG503
      @TeamG503  3 роки тому

      You will probably be ok if the seal is square.

  • @paolorevello4593
    @paolorevello4593 9 місяців тому

    e usa una siringa!!