Ali! Thanks for the plans for this bar! Just built mine yesterday, and had to do it with electrical conduit rather than white PVC pipe made for water. And because 'm in the US, the diameters had to change just a little to have one tube fit inside the other. But I tried it and decided to make an easy stability improvement with some pre-bent PVC electrical conduit instead of a straight bar for the outer feet. I took some pics, but not sure how to post pics in comments. But... also just wanted to say I'm always stoked to see new material from you, and I always get a lot out of your riding technique tutorials. KEEP IT UP, and THANK YOU! LOVE YOUR STYLE AND YOUR VLOGS, MAN!
This is the best bar I have seen so far. I especially love the portability of it, so I can take it to some quiet place and train without being disturbed. I can't wait to build this myself. Already have the bungee cord :)
I have a couple of ideas to help make this a bit better. 1) Get 4 caps to put on the ends of your bases then fill them with sand and plug the end with expanding foam or glue/epoxy. That way you can have take them off to transfer port but still have a nice weighted base too. 2) I love the bungee idea and you could use caps on the ends as well and attach an eye bolt through it the tie the bungee to them so it's all kept internally or just drill a hole through the center of the cap and use a smaller knot instead. You wonder need much tension but you can adjust it easily with either method.
Really nice tutorial Ali! It's not easy to make such an informative step by step video without missing something. Very impressed on how well you've done this video :)
Wow dude that is simply brilliant I probably wont get the time to build me one of these for a bit but that's going on the to do list for sure as I keep fearing bunny hopping high logs and stuff because a case can go oh so wrong. I'm sure a bar like this would have me hopping higher in no time!
Epic idea, really like the tent pole inspired bungee cord cross bar. Can I ask if the cross bar rolls off easily enough if you nose bonked your front wheel into it? Love the channel by the way.
Great vid. One tip to save time cutting and filing is to use a Dremel with a larger size cutoff wheel. Makes quick work of all the necessary cuts/filing.
I may have to make something like that. I'm definitely looking forward to the how to bunny hop video, I am about the worst ever at bunny hopping and need all of the help I can get.
great idea. only thing I would do is to cut a notch into each end of the cross bar. You can then pull the bungee cord into it and the knot will sit outside the pipe. Think this would make it sit more secure on the clips.
Awesome! Thanks for the tutorial. I will be making one of these when I can because I've always wanted to see how high I could bunnyhop and what height I can do on average. I ride bmx and usually hit my bum on my tire as I do fairly high hops. I am trying to learn the side hop as I just watched your tutorial on how to bunnyhop and I can stop hitting my bum on the tire lol
Hope Tartydays is a blast! Awesome to see the final evolution of this rig, I've always been interested in the idea of having some or of screen or sheet that you can bring to the bar from the ground at first for getting used to judging the distance. The bungee cord idea is great!
You really start your own 'How to series'. I am very exited with that. And nice bunnyhop bar DIY, Is bungecord inside the pole idea yours? It's brilliant. I used to use paper box for practice but I'll try to make smaller version of bunnyhop bar with 20mmID since I'm really not good at bunnyhop :)
If you would like to put some curves in i it or save sanding time, you can cut pvc pipe with a knife or scissors and bend it into what ever angle you want if you warm it up with a heat gun or over a hot stove, it will and turn into taffy at this point it can be cut with scissors, knife or shaped. run it under cold water to after to have it stay in the position you want
Hi Ali, My cousin and I think about, to buy our first trial and we are not so sure which Bike it should be? Can you / the community give us a few tips about this. We hope that you can help us and we looking forward to seeing you soon in the next Vlog. And really usefull How To. 😎👍
Es gibt in Dtl. niemand der Street Trial fährt? lol. There's tons of riders riding street over here. If you haven't ridden any street trial yet, a Flow, Arcade, 4play will pretty much feel the same (in terms of weirdness). Try to get a used on off "kleinanzeigen" and find out whether riding street trials is for you.
Hi Nico, Ok, ich habe etwas übertrieben, was ich aber eigentlich sagen wollte ist, dass es bei mir in der nähe (Hückeswagen 42499) nicht so viele Angebote gibt, und ich niemanden persönlich kenne der Trial fährt. Mir ist natürlich klar, dass ein neues Fahrrad für einen Anfänger vieleicht etwas zu gut ist, und ich habe mich natürlich auch immer wieder auf solchen Plattformen wie Ebay umgesehen aber da gibt es auch nicht so viele Trials wie ich gerne hätte aber die Auswahl ist natürlich mehr als genug. Ich freue mich, dass du so schnell Widerspruch eingelegt und mich verbessert hast, den Kommentar werde ich nocheinmal überarbeiten. Wenn du/ihr irgendwelche guten Tips habt die uns weiter helfen können, dann lasst es uns doch bitte wissen. 👍
Cut off the side knobs of their tires with a Stanley knife, use titanium bolts and the lightest parts available. That goes for comp riders riding pure trials. Ali's been tuning his bike with titanium bolts all over, and if I'm not mistaken with new lightweight singlespeed hubs. In any case, there isn't much to say to fill a vlog with this and it would be kinda boring. Just like, say, a vlog on how to build a bunny hop bar. :P
The bungee idea was Inspired......pun intended. Great tutorial Ali cheers. A trip to B&Q for just a few quid = instant fun.
Ali, thank a lot for this tutorial about bunnyhop bar! Smart and functionality!
This video is actually a good English lesson.
Ali! Thanks for the plans for this bar! Just built mine yesterday, and had to do it with electrical conduit rather than white PVC pipe made for water. And because 'm in the US, the diameters had to change just a little to have one tube fit inside the other.
But I tried it and decided to make an easy stability improvement with some pre-bent PVC electrical conduit instead of a straight bar for the outer feet. I took some pics, but not sure how to post pics in comments.
But... also just wanted to say I'm always stoked to see new material from you, and I always get a lot out of your riding technique tutorials. KEEP IT UP, and THANK YOU! LOVE YOUR STYLE AND YOUR VLOGS, MAN!
Wow that's an awesome way to many a pretty strong bunny hop bar! I just can't wait for the how to video!!!! Cheers Ali!
This is the best bar I have seen so far. I especially love the portability of it, so I can take it to some quiet place and train without being disturbed. I can't wait to build this myself. Already have the bungee cord :)
Love the idea of the bungee cord... reminds me the concept behind tent poles
Going to build this right now! Absolutely brilliant. Slight type-o in the description: 40-38mm reducer should read 40-32mm reducer. Thanks!
I have a couple of ideas to help make this a bit better.
1) Get 4 caps to put on the ends of your bases then fill them with sand and plug the end with expanding foam or glue/epoxy. That way you can have take them off to transfer port but still have a nice weighted base too.
2) I love the bungee idea and you could use caps on the ends as well and attach an eye bolt through it the tie the bungee to them so it's all kept internally or just drill a hole through the center of the cap and use a smaller knot instead. You wonder need much tension but you can adjust it easily with either method.
Awesome design Ali! Very nice next level bhop bar down to the details.
Really nice tutorial Ali! It's not easy to make such an informative step by step video without missing something.
Very impressed on how well you've done this video :)
All i need is a piece of crayon. I draw a line on the ground and try to hop over it. Liked the "hopability" :D
Wow dude that is simply brilliant I probably wont get the time to build me one of these for a bit but that's going on the to do list for sure as I keep fearing bunny hopping high logs and stuff because a case can go oh so wrong. I'm sure a bar like this would have me hopping higher in no time!
So glad your going to do some how to guides! 👌🏻👌🏻🤙🏻👍🏻👍🏻 cheers dude! Sick video as always
Whoa a sub 20 minute video Ali!
really cool idea i like it that you do how to bunnyhop
maybe a video with sidehops or hooks? that would be very nice
Epic idea, really like the tent pole inspired bungee cord cross bar. Can I ask if the cross bar rolls off easily enough if you nose bonked your front wheel into it? Love the channel by the way.
Great vid. One tip to save time cutting and filing is to use a Dremel with a larger size cutoff wheel. Makes quick work of all the necessary cuts/filing.
I may have to make something like that. I'm definitely looking forward to the how to bunny hop video, I am about the worst ever at bunny hopping and need all of the help I can get.
great idea. only thing I would do is to cut a notch into each end of the cross bar. You can then pull the bungee cord into it and the knot will sit outside the pipe. Think this would make it sit more secure on the clips.
Thanks Ali. Now for an old retiree to learn bigger bunny hops from your other video.(bigger than 20 cm for me) ;-)
Awesome DIY tutorial bro.
Awesome! Thanks for the tutorial. I will be making one of these when I can because I've always wanted to see how high I could bunnyhop and what height I can do on average. I ride bmx and usually hit my bum on my tire as I do fairly high hops. I am trying to learn the side hop as I just watched your tutorial on how to bunnyhop and I can stop hitting my bum on the tire lol
Definitely going to build this! Thank you for the tutorial!
Hope Tartydays is a blast! Awesome to see the final evolution of this rig, I've always been interested in the idea of having some or of screen or sheet that you can bring to the bar from the ground at first for getting used to judging the distance. The bungee cord idea is great!
Printed faux brick wall (plastic) sheet wld be awesome.
Great Video Ali
Really enjoy your Vlogs, they're excellent! :)
Ali great inventor!!!
Good Idea, some useful content :) please do more how to/ideas.
You really start your own 'How to series'. I am very exited with that. And nice bunnyhop bar DIY, Is bungecord inside the pole idea yours? It's brilliant. I used to use paper box for practice but I'll try to make smaller version of bunnyhop bar with 20mmID since I'm really not good at bunnyhop :)
If you would like to put some curves in i
it or save sanding time, you can cut pvc pipe with a knife or scissors and bend it into what ever angle you want if you warm it up with a heat gun or over a hot stove, it will and turn into taffy at this point it can be cut with scissors, knife or shaped. run it under cold water to after to have it stay in the position you want
pretty awesome bar 😍 love to build it someday
Vlog 61 is going to be freaking awesome :)
When will you collaborate with Sam Pilgrim?
Nice :D
Did those skate guys ever ride your inflatable deck?
Nice! Keep it up!
I missed trials)
Why didn't you go on tour to Czech and Belgium with others?
Nice video Ali 👌
Very good idea, especially with the bungee! Not related but is it true that #TheSpot has gone?
Do you sell the green arcade?
I'm looking for a street trial bike whitout spending too much.
Please more of this creative stuff :D
nice idea!
Awesome!!!!!!
awesome vid
Thanks!
Nice!👍😁
cool!!! engineering!!
sick and rad all at the same time . I've destroyed the like button, now my PC do's not work any more, lol
Excelente.
Perfect
What's Danny's stem if you know
my bar is cheaper as i dont need uprights, maybe after the next "how to" i"ll be getting off the ground!
Hi Ali,
My cousin and I think about, to buy our first trial and we are not so sure which Bike it should be?
Can you / the community give us a few tips about this.
We hope that you can help us and we looking forward to seeing you soon in the next Vlog.
And really usefull How To.
😎👍
Es gibt in Dtl. niemand der Street Trial fährt? lol. There's tons of riders riding street over here. If you haven't ridden any street trial yet, a Flow, Arcade, 4play will pretty much feel the same (in terms of weirdness). Try to get a used on off "kleinanzeigen" and find out whether riding street trials is for you.
Hi Nico,
Ok, ich habe etwas übertrieben, was ich aber eigentlich sagen wollte ist, dass es bei mir in der nähe (Hückeswagen 42499) nicht so viele Angebote gibt, und ich niemanden persönlich kenne der Trial fährt.
Mir ist natürlich klar, dass ein neues Fahrrad für einen Anfänger vieleicht etwas zu gut ist, und ich habe mich natürlich auch immer wieder auf solchen Plattformen wie Ebay umgesehen aber da gibt es auch nicht so viele Trials wie ich gerne hätte aber die Auswahl ist natürlich mehr als genug.
Ich freue mich, dass du so schnell Widerspruch eingelegt und mich verbessert hast, den Kommentar werde ich nocheinmal überarbeiten.
Wenn du/ihr irgendwelche guten Tips habt die uns weiter helfen können, dann lasst es uns doch bitte wissen. 👍
mtb-news.de/forum/f/trial.90/
Danke
Looks cool I'm gonna try to make that 😂🤘👍
I wonder if you could make a video on topics such as : How to lighten your bike (e.g. cut holes/grip off tires or plastic pedals), just a suggestion.
And if they are a good idea or not...
Cut holes? Not a good idea. No need to be Ali for that insight.
Ok, :) drill holes maybe? :) I'm just saying as an idea for a video you know. What do comp riders do to mod their bikes, if anything?
Cut off the side knobs of their tires with a Stanley knife, use titanium bolts and the lightest parts available. That goes for comp riders riding pure trials. Ali's been tuning his bike with titanium bolts all over, and if I'm not mistaken with new lightweight singlespeed hubs. In any case, there isn't much to say to fill a vlog with this and it would be kinda boring. Just like, say, a vlog on how to build a bunny hop bar. :P
Maybe just talking about it to give your audience an idea of what people do would be nice to hear, also the dangers of what could happen? Cheers.
Гениально 🎉
I spent only 8 euro to make mine and I used:
-2 3 meters PVC tubes
-2 Bodybuilding discs of 1kg each
Already waiting for the how to bunny hop...
where is the other 20 minutes :'(
Prepare for an explosion of views on the Bunny Hop tutorial video :-) I've watched loads, still can't do it properly!
Suppose with PVC pipes they're harder to snap doing 180's at shows :)
The problem is that I can't tell time in the metric system.
try radian degrees. It is the easiest way.
@@turboturtle8977 How modulus.
A saw for "sawring".
i can do this is like a d.i.y :D love this vlog :D
hehehe.. :D :D
i was free today.. but now im not.. i need to make a trip to the hardware store..
Ali Clarkson yes.. but mine is not so tall.. i made a small one and will make a bigger one once i max out this one..
Ali Clarkson ill tag u in a pic once it stops raining..
Mario Clarkson =)
Second
first