Wireless 3-Way Light Switch Installation Made Easy
Вставка
- Опубліковано 5 січ 2023
- Are you tired of complicated wiring for your 3-way light switch? Upgrade to a wireless solution today with this easy installation guide. In this video, we will walk you through the process of installing a wireless 3-way light switch step by step, covering everything from selecting the right wireless switch to pairing it with your existing switches. Whether you're a beginner or an experienced DIYer, this guide will provide you with the knowledge and tools you need to upgrade your lighting system to a wireless solution with ease. So don't wait, start your wireless 3-way light switch installation today! @bigmikeelectricoc
#bigmikeelectric #diy3-waylightswitch #smart3-waylightswitchinstallation
Wow. Best no time wasting vid I’ve seen in quite awhile. Just re-watched it as I received two add a switch three ways today. Thanks much.
AWESOME! Thank you for the ❤
Can it work without wifi between them?
Great video. Thanks for your clear explanations.
Much appreciation.
Awesome mike
Thank you Mark!
Hey I see this is old but if I have (2) 3 way switches and (2) 4 way switches between the 3 ways do you i just tie the travlers together in the 4 ways (red to red white to white) pass them thru set a pico go to the 3 way that has the switch leg in it tie ALL (3) those together with a red nut and set a pico then go to 3 way with the (hot) tie both travs together to one leg of the master switch and the hot to the other leg of the master. Can you use the master at the 3 way where the switch leg is or does the master need to be at the 3 way with the hot... Should work in theory what say you sparky...
Appreciate the question. Put the master at the feed end. Tie the other wires to the travelers and just use the pico. Hope this was helpful.
Thanks for this. I may do this or I was originally looking for one with a small remote (if you know of one?)
Is there a battery for the wall plate you just installed?
the main switch is connected to the power and the pico switch is a REMOTE, but we keep it in its place at the back entrance. Check out the other 3 way video we have too. It will give you another view into easily completing the job.
Great. I have old X-10s and parts are hard to find and they are not compatible with LEDs
How to wire it when I only have one white one black and one ground wire? I want to add an extra switch to become 3 way switch
Use a wireless 3 way switch like the video above. Simple and easy way to go.
Model# P-PKG1WS-WH
Big Mike. What is the model # of the switch you are installing. I can not find any that are not smart switches
Lutron Caseta Smart Home Dimmer Switch and Pico Remote Kit. This is the one I found on Amazon. Couldn't locate the part number, But this should get you to it. You can use it regardless if its a smart switch or not.
Mike, what is the model number of that product? All I can find by that manufacturer wifi.
Model# P-PKG1WS-WH
We will be adding links via affiliate program here in the very near future. They want us to have at least 100 subscribers first so we can get our one URL link.
The laser? Just measure off the floor.
Start with a point on the wall, let's say 42". Then the laser will show you an equivalent throughout the space.
Can you use a metal plate on this?
where do you want to add a metal plate? Everything you should need comes with the 3 way kit.
don't you need a hub as well?
No. You don't need a hub for this three way lighting circuit.