Shootsteel makes 12” wood armor that you place between the plate attachments to protect the wood and positions the targets exactly 14” center to center. Requires a 10 ft 2x4. I’ve used mine for years with thousands of shooters and its indestructible if you stick with pistol calibers.
They make shorter "wood armor" too. You don't need to buy the 12" ones. That spreads the plates out too much. The down side to that method also is it makes the entire rack way too heavy.
The description on the shoot steel web site says that the targets are approx 24 inch off the ground which seems extremely low. However, in your video it seems to be possibly double that. Is it just stated wrong?
Can you shoot Full Metal Jacket 9 mm ammunition and 38 special and 357 Magnum at this plate rack? Thanks for your time Simon PS how far back do I have to stand from these plates when shooting Full Metal Jacket thank you again
I shoot it with my competition rifles in .223 and .308. The concern is not whether the steel will hold up, but keeping a properly safe distance relative to the velocity of the projectile you are sending down range. So, yes. Just stay safely distant from it, and weary proper eye protection.
Sean, What is this rack rated for? I understand the steel itself can withstand most anything you can throw at it but what type of force can it withstand without breaking the 2x4 or completely knocking it over. I have in mind shooting it with 50 AE.
I’m not sure they can rate it. Too many variables in types of 2x4 studs. Besides it costs $6 to replace and government ratings are minimum standards of quality not maximum. I don’t plan on having Rosie O’Donnel sit on it so I’m confident it will withstand all the hot lead I throw at it. The plates are AR500 rated but that is an armor rating which any steel target damn well better exceed (which is like 50 shots or something). So... again, with as much abuse as I put my steel through, no problems. Thousands of rounds. Dozens of setups and tear downs per month.
Thanks for the video Sean. Sean what is the distance between plates. Either edge to edge or center to center that you are using here. I've read 12" center to center which is what I've got mine at and the plates are approximately 4.25" apart from each other. I also have seen a Bianchi cup plate rack that had them at 20" on center. Your plates look closer to each other than that. Thank you.
Different plate racks vary. I put this on a 6' stud because that is what I could fit in my car at the time. Now I'm driving a truck, so it is less of a concern. 12" sounds right, but I'm not certain. I don't secure the plates to the stud, I slide them on and off for setup and takedown so I can do it myself without any help. A 6' stud with 6 plates on it gets kinda heavy.
Friends have been telling me not to shoot steel with my 9 mm SW. What is a safe distance, If I don't have AR550 Steel but have stainless steel at 1/2 think am I taking chances? Thanks
I've never shot stainless steel. I don't know how that will react or if it will fragment. So be careful. Always wear eye protection... GOOD eye protection. I would also recommend you shoot steel that is made to be shot (real steel targets). They have stands that mount the plates so they flex and/or face downward at an angle so fragmentation is less likely to come back at you. Also, consider the ammo you are shooting. Frangible ammo is best if shooting a close ranges. I don't get closer than 15 feet. Ever. But that is with the correct combination of ammo and steel. Do your homework and don't rush into anything.
For bedside right now I use the one from www.thegunbox.com but it is kinda slow opening, but it is super secure. I have mixed feelings about it. I'm also a fan of www.gunvault.com and I have a few of those around the house. They open much quicker. There isn't a perfect solution, but for me safety first. I live in a safe neighborhood, but I have 4 kids that constantly are bringing friends over and so my main priority is to keep everything locked and hidden. I want quick access for if there is ever a home invasion, but that isn't my first worry.
Nothing of the sort is mentioned or shown in the video. That is a 5.5’ stud in the video with an extra plate that doesn’t come with the stock set (which is demonstrated in the video). I’m sorry you drive a Prius.
How about anyone who has actually tried to buy a plate rack. That would be a good starting point. Here is a link to the MGM “Economy” Plate Rack. ads.midwayusa.com/product/1015167568 ...the world is a crazy place when you develop perspective.
it’s nice but i’m not professional shooter, not shoot alots, of course cost alot $$$&, once a while ok but i like old fashion, cans, water bottles, fruits, just flicking for couple of hours... lol lol
Shootsteel makes 12” wood armor that you place between the plate attachments to protect the wood and positions the targets exactly 14” center to center. Requires a 10 ft 2x4. I’ve used mine for years with thousands of shooters and its indestructible if you stick with pistol calibers.
They make shorter "wood armor" too. You don't need to buy the 12" ones. That spreads the plates out too much. The down side to that method also is it makes the entire rack way too heavy.
The description on the shoot steel web site says that the targets are approx 24 inch off the ground which seems extremely low. However, in your video it seems to be possibly double that. Is it just stated wrong?
I own one of these. It’s great. Get one. Very easy to use
What happens to these bullets? do they fall straight down?.. seems like there's bound to be some dangerous ricochet going on.
Love your channel! You inspire me to get out there and practice!
Fantastic! Keep shooting, stay safe.
I'm going to have to build one of those for my range. Plus, I subscribed to you. 👍
Thank you for your support! Glad you like the videos!
Can you shoot Full Metal Jacket 9 mm ammunition and 38 special and 357 Magnum at this plate rack? Thanks for your time Simon PS how far back do I have to stand from these plates when shooting Full Metal Jacket thank you again
I shoot it with my competition rifles in .223 and .308. The concern is not whether the steel will hold up, but keeping a properly safe distance relative to the velocity of the projectile you are sending down range. So, yes. Just stay safely distant from it, and weary proper eye protection.
Sean,
What is this rack rated for? I understand the steel itself can withstand most anything you can throw at it but what type of force can it withstand without breaking the 2x4 or completely knocking it over. I have in mind shooting it with 50 AE.
I’m not sure they can rate it. Too many variables in types of 2x4 studs. Besides it costs $6 to replace and government ratings are minimum standards of quality not maximum. I don’t plan on having Rosie O’Donnel sit on it so I’m confident it will withstand all the hot lead I throw at it. The plates are AR500 rated but that is an armor rating which any steel target damn well better exceed (which is like 50 shots or something). So... again, with as much abuse as I put my steel through, no problems. Thousands of rounds. Dozens of setups and tear downs per month.
Thanks for the video Sean. Sean what is the distance between plates. Either edge to edge or center to center that you are using here. I've read 12" center to center which is what I've got mine at and the plates are approximately 4.25" apart from each other. I also have seen a Bianchi cup plate rack that had them at 20" on center. Your plates look closer to each other than that. Thank you.
Different plate racks vary. I put this on a 6' stud because that is what I could fit in my car at the time. Now I'm driving a truck, so it is less of a concern. 12" sounds right, but I'm not certain. I don't secure the plates to the stud, I slide them on and off for setup and takedown so I can do it myself without any help. A 6' stud with 6 plates on it gets kinda heavy.
@@SeanGoBoom Thank you for the reply. I've only got 1/4" plates on mine and yes it is heavy! Thank you again!
Friends have been telling me not to shoot steel with my 9 mm SW.
What is a safe distance, If I don't have AR550 Steel but have stainless steel at 1/2 think am I taking chances? Thanks
I've never shot stainless steel. I don't know how that will react or if it will fragment. So be careful. Always wear eye protection... GOOD eye protection. I would also recommend you shoot steel that is made to be shot (real steel targets). They have stands that mount the plates so they flex and/or face downward at an angle so fragmentation is less likely to come back at you. Also, consider the ammo you are shooting. Frangible ammo is best if shooting a close ranges. I don't get closer than 15 feet. Ever. But that is with the correct combination of ammo and steel. Do your homework and don't rush into anything.
Sean Burrows got any recommendations for frangible rounds? Particularly 9mm?
Great channel 2A all the way... Just subscribed keep em coming
Glad you like it.
Might be getting that plate rack, definitely getting that shirt haha
To quote the movie Step Brothers, "...so many activities..."
Hey Sean I've been looking for a bed side safe for my vp9 any recommendations??
For bedside right now I use the one from www.thegunbox.com but it is kinda slow opening, but it is super secure. I have mixed feelings about it. I'm also a fan of www.gunvault.com and I have a few of those around the house. They open much quicker. There isn't a perfect solution, but for me safety first. I live in a safe neighborhood, but I have 4 kids that constantly are bringing friends over and so my main priority is to keep everything locked and hidden. I want quick access for if there is ever a home invasion, but that isn't my first worry.
Sean Burrows alright thanks!
My pleasure.
@Greg W I do both, unchambered and in biometric safe....
Great video. Are these the 8 inch ones?
Yes.
Great videos bro!
My pleasure!
An 8ft. 2x4 in your trunk? One hell of a big trunk.
Nothing of the sort is mentioned or shown in the video. That is a 5.5’ stud in the video with an extra plate that doesn’t come with the stock set (which is demonstrated in the video). I’m sorry you drive a Prius.
@@SeanGoBoom "nelson laugh" haha
Don’t know how in the world anyone could call this budget friendly.
How about anyone who has actually tried to buy a plate rack. That would be a good starting point. Here is a link to the MGM “Economy” Plate Rack. ads.midwayusa.com/product/1015167568 ...the world is a crazy place when you develop perspective.
it’s nice but i’m not professional shooter, not shoot alots, of course cost alot $$$&, once a while ok but i like old fashion, cans, water bottles, fruits, just flicking for couple of hours... lol lol
It’s for people serious about training. Not your average plinking tool for sure.
Add links and I will subscribe
There is a reason they've been removed. UA-cam has terms that prevent such things now. Sorry.
Based on this review, I may or may not be purchasing this.
Fair enough LOL
Sean Burrows
Actually, it’s cool. I like the speed rack.
Can you buy the plate hangers by themselves?